FCC ID SO4YX510-CEL

CELLULAR BI- DIRECTIONAL SIGNAL BOOSTER

by zBoost, LLC

Grantee Code: SO4   Product Code: YX510CEL
Latest application date: 2006-12-29

FCC ID Device Details

FCC IDSO4YX510-CEL
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeSO4
Product CodeYX510CEL
Applicant BusinesszBoost, LLC 🇺🇸
Related Domains zboost.com
Equipment ClassCELLULAR BI- DIRECTIONAL SIGNAL BOOSTER
Test FirmAdvanced Compliance Solutions, Inc.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
824-849 MHzOriginal Equipment2006-12-29

Exhibits

DocumentTypeAvailableFile
USERS MANUALUsers Manual2006-12-29PDF 518.7 KB
INTERNAL PHOTOSInternal Photos2006-12-29PDF 541.2 KB
EXTERNAL PHOTOSExternal Photos2006-12-29PDF 542.4 KB
LABEL LOCATIONID Label/Location Info2006-12-29PDF 248 KB
TEST SETUP PHOTOSTest Setup Photos2006-12-29PDF 532.2 KB
TEST REPORT 1Test Report2006-12-29PDF 115.2 KB
TEST REPORT 2Test Report2006-12-29PDF 1.1 MB
CONFIDENTIALITY LETTERCover Letter(s)2006-12-29PDF 28.5 KB
RF EXPOSURERF Exposure Info2006-12-29PDF 30.4 KB
BLOCK DIAGRAM Metadata onlyBlock DiagramPDF 28.1 KB
SCHEMATICS Metadata onlySchematicsPDF 203.3 KB
OPERATIONAL DSECRIPTION Metadata onlyOperational DescriptionPDF 23.6 KB
PARTS LIST Metadata onlyParts List/Tune Up InfoPDF 28.1 KB
TUNE UP PROCEDURE Metadata onlyParts List/Tune Up InfoPDF 64.1 KB

Application Information

Application IDCVyEQGpeKGI7QTEYVmmYfg==
Final Action Date2006-12-29
Application PurposeOriginal Equipment
Applicant FRN0011444023
ModelYX510-CEL
Frequency Range824-849 MHz
Equipment ClassTNB - Licensed Non-Broadcast Station Transmitter
Device DescriptionCELLULAR BI- DIRECTIONAL SIGNAL BOOSTER
Responsible PartyScott Terry, VP of Engineering, sterry@zboost.com , 408-838-1302
Test FirmSam Wismer, Advanced Compliance Solutions, Inc., swismer@acstestlab.com , 770-831-8048
TCB EmailTEI@TIMCOENGR.COM
TCB ScopeB1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 (below 3 GHz) & 27
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceNo
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsPower listed is maximum conducted per carrier. The antenna(s) used for this transmitter must be fixed-mounted on indoor and outdoor permanent structures with a separation distance of at least 20 cm and 40cm from all persons and a maximum gain of 6dBi and 15dBi respectively for indoor and outdoor operations. Users and installers must be provided with appropriate antenna installation instructions and transmitter operating conditions, including antenna co-location requirements of §1.1307(b)(3), for satisfying RF exposure compliance. RF exposure compliance may need to be addressed at the time of licensing, as required by the responsible FCC Bureau(s), including antenna co-location requirements of §1.1307(b)(3).

Applications

Application IDDatePurpose
CVyEQGpeKGI7QTEYVmmYfg==2006-12-29Original Equipment

Equipment Authorization

FrequencyOutputToleranceEmissionRules
824-849 MHz0.353AmpF9W22H
824-849 MHz0.187AmpDXW22H
824-849 MHz0.267AmpGXW22H
824-849 MHz0.267AmpF1D22H
869-894 MHz0.0025AmpF9W22H
869-894 MHz0.0024AmpDXW22H
869-894 MHz0.0024AmpGXW22H
869-894 MHz0.0024AmpF1D22H

Grants

TCB Grant - Application CVyEQGpeKGI7QTEYVmmYfg==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669
Date of Grant: 12/29/2006

Application Dated: 12/29/2006
zBoost, LLC
One Meca Way
Norcross, GA 30093
 
Attention: Scott Terry , VP of Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  SO4YX510-CEL
Name of Grantee:  zBoost, LLC
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: CELLULAR BI- DIRECTIONAL SIGNAL BOOSTER
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
22H 824.0  -  849.0 0.353  Amp F9W
22H 824.0  -  849.0 0.187  Amp DXW
22H 824.0  -  849.0 0.267  Amp GXW
22H 824.0  -  849.0 0.267  Amp F1D
22H 869.0  -  894.0 0.0025  Amp F9W
22H 869.0  -  894.0 0.0024  Amp DXW
22H 869.0  -  894.0 0.0024  Amp GXW
22H 869.0  -  894.0 0.0024  Amp F1D

Power listed is maximum conducted per carrier. The antenna(s) used for this transmitter must be fixed-mounted on indoor and outdoor permanent structures with a separation distance of at least 20 cm and 40cm from all persons and a maximum gain of 6dBi and 15dBi respectively for indoor and outdoor operations. Users and installers must be provided with appropriate antenna installation instructions and transmitter operating conditions, including antenna co-location requirements of §1.1307(b)(3), for satisfying RF exposure compliance. RF exposure compliance may need to be addressed at the time of licensing, as required by the responsible FCC Bureau(s), including antenna co-location requirements of §1.1307(b)(3).

EAS Grant - Application CVyEQGpeKGI7QTEYVmmYfg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

zBoost, LLC
One Meca Way
Norcross, GA 30093
United States
  Date of Grant: 12/29/2006

Application Dated: 12/29/2006
 
Attention: Scott Terry , VP of Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  SO4YX510-CEL
Name of Grantee:  zBoost, LLC
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: CELLULAR BI- DIRECTIONAL SIGNAL BOOSTER
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
22H 824.0  -  849.0 0.353  Amp F9W
22H 824.0  -  849.0 0.187  Amp DXW
22H 824.0  -  849.0 0.267  Amp GXW
22H 824.0  -  849.0 0.267  Amp F1D
22H 869.0  -  894.0 0.0025  Amp F9W
22H 869.0  -  894.0 0.0024  Amp DXW
22H 869.0  -  894.0 0.0024  Amp GXW
22H 869.0  -  894.0 0.0024  Amp F1D

Power listed is maximum conducted per carrier. The antenna(s) used for this transmitter must be fixed-mounted on indoor and outdoor permanent structures with a separation distance of at least 20 cm and 40cm from all persons and a maximum gain of 6dBi and 15dBi respectively for indoor and outdoor operations. Users and installers must be provided with appropriate antenna installation instructions and transmitter operating conditions, including antenna co-location requirements of §1.1307(b)(3), for satisfying RF exposure compliance. RF exposure compliance may need to be addressed at the time of licensing, as required by the responsible FCC Bureau(s), including antenna co-location requirements of §1.1307(b)(3).



Mail To: