FCC ID SOA-RS2000
RFID Reader
by MEPS Real-Time, Inc.
Grantee Code: SOA Product Code: RS2000
Latest application date: 2018-04-05
FCC ID Device Details
| FCC ID | SOA-RS2000 |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | SOA |
| Product Code | RS2000 |
| Applicant Business | MEPS Real-Time, Inc. 🇺🇸 |
| Related Domains |  mepsrealtime.com |
| Equipment Class | RFID Reader |
| Test Firm | Nemko USA, Inc. - San Diego EMC Division |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 902.75-927.25 MHz | Class II permissive change or modification of presently authorized equipment | 2018-04-05 |
| 902.75-927.25 MHz | Change in identification of presently authorized equipment. Original FCC ID: TWYIPJRS2000 Grant Date: 07/02/2015 | 2018-03-01 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| user manual | Users Manual | 2018-04-05 | PDF 1.2 MB |
| external photos | External Photos | 2018-03-01 | PDF 90.2 KB |
| label and location | ID Label/Location Info | 2018-03-01 | PDF 70.3 KB |
| test setup photos | Test Setup Photos | 2018-04-05 | PDF 798.7 KB |
| test report | Test Report | 2018-04-05 | PDF 874 KB |
| C2PC letter | Cover Letter(s) | 2018-04-05 | PDF 174.4 KB |
| agent letter | Cover Letter(s) | 2018-04-05 | PDF 29.8 KB |
| business letter | Cover Letter(s) | 2018-04-05 | PDF 238.9 KB |
| CHID letter | Cover Letter(s) | 2018-03-01 | PDF 22.6 KB |
| permission letter | Cover Letter(s) | 2018-03-01 | PDF 395.7 KB |
| MPE | RF Exposure Info | 2018-04-05 | PDF 70.5 KB |
Application Information
| Application ID | y29UzMvwiOp9iJn1bpmcLQ== |
|---|---|
| Final Action Date | 2018-04-05 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0012036547 |
| Model | RS2000 |
| Frequency Range | 902.75-927.25 MHz |
| Equipment Class | DSS - Part 15 Spread Spectrum Transmitter |
| Device Description | RFID Reader |
| Responsible Party | Paul Mark Elizondo, VP Engineering and R&D;, pelizondo@mepsrealtime.com , 1-760-448-9500 |
| Agent | Debbie Debbie Debbie, Nemko USA, Inc., Debbie.wilson@nemko.com  |
| Test Firm | Charles Neal, Nemko USA, Inc. - San Diego EMC Division, charles.neal@nemko.com , 613-737-9680 x239 |
| TCB Email | stuart.beck@nemko.com |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | No |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Output power listed is conducted. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 35 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except the collocation in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| y29UzMvwiOp9iJn1bpmcLQ== | 2018-04-05 | Class II permissive change or modification of presently authorized equipment |
| ZPdMX230FUxup5VD1wgP3Q== | 2018-03-01 | Change in identification of presently authorized equipment. Original FCC ID: TWYIPJRS2000 Grant Date: 07/02/2015 |
Equipment Authorization
| Frequency | Output | Rules |
|---|---|---|
| 902.75-927.25 MHz | 0.9680000 | 15C |
Grants
TCB Grant - Application ZPdMX230FUxup5VD1wgP3Q==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Nemko North America, INC. 303 River Road Ottawa, Ontario, K1V 1H2 Canada |
Date of Grant: 03/01/2018 Application Dated: 02/28/2018 |
| MEPS Real-Time, Inc. |
| 6451 El Camino Real |
| Suite C |
| Carlsbad, CA 92009 |
| Attention: Paul Elizondo , VP Engineering and R&D |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | SOA-RS2000 |
| Name of Grantee: | MEPS Real-Time, Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | RFID Reader |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.75 - 927.25 | 0.968 |
| Output power listed is conducted. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 21cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except the collocation in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. |
EAS Grant - Application ZPdMX230FUxup5VD1wgP3Q==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
MEPS Real-Time, Inc. 6451 El Camino Real Suite C Carlsbad, CA 92009 United States |
Date of Grant: 03/01/2018 Application Dated: 02/28/2018 |
| Attention: Paul Elizondo , VP Engineering and R&D |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | SOA-RS2000 |
| Name of Grantee: | MEPS Real-Time, Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | RFID Reader |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.75 - 927.25 | 0.968 |
| Output power listed is conducted. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 21cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except the collocation in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Nemko North America, INC. 303 River Road Ottawa, Ontario, K1V 1H2 Canada |
Date of Grant: 04/05/2018 Application Dated: 04/04/2018 |
| MEPS Real-Time, Inc. |
| 6451 El Camino Real |
| Suite C |
| Carlsbad, CA 92009 |
| Attention: Paul Elizondo , VP Engineering and R&D |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | SOA-RS2000 |
| Name of Grantee: | MEPS Real-Time, Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | RFID Reader |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.75 - 927.25 | 0.968 |
| Output power listed is conducted. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 35 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except the collocation in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. |
EAS Grant - Application y29UzMvwiOp9iJn1bpmcLQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
MEPS Real-Time, Inc. 6451 El Camino Real Suite C Carlsbad, CA 92009 United States |
Date of Grant: 04/05/2018 Application Dated: 04/04/2018 |
| Attention: Paul Elizondo , VP Engineering and R&D |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | SOA-RS2000 |
| Name of Grantee: | MEPS Real-Time, Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | RFID Reader |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.75 - 927.25 | 0.968 |
| Output power listed is conducted. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 35 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except the collocation in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. |
| Mail To: |