FCC ID SOP424151A
IEEE 802.11 a/b/g/n 1T1R WLAN and Bluetooth Low Energy Microcontroller Module
by Roland Corporation
Grantee Code: SOP Product Code: 424151A
Latest application date: 2021-06-10
FCC ID Device Details
| FCC ID | SOP424151A |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | SOP |
| Product Code | 424151A |
| Applicant Business | Roland Corporation 🇯🇵 |
| Related Domains |  roland.com |
| Equipment Class | IEEE 802.11 a/b/g/n 1T1R WLAN and Bluetooth Low Energy Microcontroller Module |
| Test Firm | Bureau Veritas CPS(H.K.) Ltd., Taoyuan Branch |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2021-06-10 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2021-06-10 |
| 5180-5240 MHz | Change in identification of presently authorized equipment. Original FCC ID: TLZ-CU488 Grant Date: 04/07/2021 | 2021-04-29 |
| 2402-2480 MHz | Change in identification of presently authorized equipment. Original FCC ID: TLZ-CU488 Grant Date: 04/07/2021 | 2021-04-29 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Users Manual | Users Manual | 2021-12-07 | PDF 2.3 MB |
| Internal photos | Internal Photos | 2021-12-07 | PDF 2.4 MB |
| External photos | External Photos | 2021-12-07 | PDF 1.1 MB |
| External photos | External Photos | 2021-10-26 | PDF 752.7 KB |
| Label Location | ID Label/Location Info | 2021-06-10 | PDF 8.6 KB |
| Label Sample (AW-CU108) | ID Label/Location Info | 2021-06-10 | PDF 243.6 KB |
| Label Sample (WC-1) | ID Label/Location Info | 2021-06-10 | PDF 252.9 KB |
| Label sample and label location rev | ID Label/Location Info | 2021-04-29 | PDF 199.7 KB |
| Test setup photos (SAR) rev4 | Test Setup Photos | 2021-12-07 | PDF 750.7 KB |
| Agent Authorization | Cover Letter(s) | 2021-06-10 | PDF 141.7 KB |
| Confidentiality Request (Short term) | Cover Letter(s) | 2021-06-10 | PDF 127.5 KB |
| Description of Change rev2 | Cover Letter(s) | 2021-06-10 | PDF 361.3 KB |
| Agent Authorization | Cover Letter(s) | 2021-04-29 | PDF 140.3 KB |
| Change ID Authorization | Cover Letter(s) | 2021-04-29 | PDF 114 KB |
| Confidentiality Request (Short term) | Cover Letter(s) | 2021-04-29 | PDF 127 KB |
| Request for Change ID rev | Cover Letter(s) | 2021-04-29 | PDF 469 KB |
| RF Exposure Info (SAR) rev2 | RF Exposure Info | 2021-06-10 | PDF 4.9 MB |
Application Information
| Application ID | fSnMx0Gj6WLDuRRG+zCNiw== |
|---|---|
| Final Action Date | 2021-06-10 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0012075693 |
| Model | 424151A |
| Frequency Range | 5180-5240 MHz |
| Equipment Class | NII - Unlicensed National Information Infrastructure TX |
| Device Description | IEEE 802.11 a/b/g/n 1T1R WLAN and Bluetooth Low Energy Microcontroller Module |
| Responsible Party | Hisashi Ninomiya, Assistant Manager, Hisashi.Ninomiya@roland.com , 81-534285095 |
| Agent | Debby Debby Debby, Bureau Veritas CPS (H.K.) Ltd., Taoyuan Branch, debby.lin@bureauveritas.com  , 886-3-3183232 |
| Test Firm | Eric Lin, Bureau Veritas CPS(H.K.) Ltd., Taoyuan Branch, eric-wp.lin@tw.bureauveritas.com  , +886-3-2641570 |
| TCB Email | certification@nacsemc.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | Yes |
| Short-Term Confidentiality Date | 12/07/2021 |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Class II Permissive Change for adding one new portable host platform (Brand: Roland, Model: WC-1; Brand : AZUREWAVE, Model: AW-CU108) with NII-2C and NII-3 bands disabled as described in this filing. The highest reported SAR value for body exposure condition is 1.06 W/kg. Power listed is maximum conducted output power. This device supports 20 MHz bandwidth mode. Single modular approval for mobile RF exposure conditions. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| fSnMx0Gj6WLDuRRG+zCNiw== | 2021-06-10 | Class II permissive change or modification of presently authorized equipment |
| 93ONPle9erYY4cKBAmOgig== | 2021-06-10 | Class II permissive change or modification of presently authorized equipment |
| pjMXtCWVKy7g763zGsnKZQ== | 2021-04-29 | Change in identification of presently authorized equipment. Original FCC ID: TLZ-CU488 Grant Date: 04/07/2021 |
| bKpd9VskrCejqMckimAjDA== | 2021-04-29 | Change in identification of presently authorized equipment. Original FCC ID: TLZ-CU488 Grant Date: 04/07/2021 |
Equipment Authorization
Grants
TCB Grant - Application pjMXtCWVKy7g763zGsnKZQ==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
North American EMC Certification Services Inc 24889 Ferguson Ave Maple Ridge, BC, Canada |
Date of Grant: 04/29/2021 Application Dated: 04/29/2021 |
| Roland Corporation |
| 1-5-3, Shinmiyakoda |
| Kita-ku,Hamamatsu, Sizuoka,, 431-2103 Japan |
| Attention: Hisashi Ninomiya , Assistant Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | SOP424151A |
| Name of Grantee: | Roland Corporation |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | IEEE 802.11 a/b/g/n 1T1R WLAN and Bluetooth Low Energy Microcontroller Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5240.0 | 0.14 | ||
| CC ND | 15E | 5260.0 - 5320.0 | 0.075 | ||
| CC ND | 15E | 5500.0 - 5700.0 | 0.078 | ||
| CC | 15E | 5745.0 - 5825.0 | 0.137 |
| Power listed is maximum conducted output power. This device supports 20 MHz bandwidth mode. Single modular approval for mobile RF exposure conditions. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application pjMXtCWVKy7g763zGsnKZQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Roland Corporation 1-5-3, Shinmiyakoda Kita-ku,Hamamatsu, Sizuoka,, 431-2103 Japan |
Date of Grant: 04/29/2021 Application Dated: 04/29/2021 |
| Attention: Hisashi Ninomiya , Assistant Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | SOP424151A |
| Name of Grantee: | Roland Corporation |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | IEEE 802.11 a/b/g/n 1T1R WLAN and Bluetooth Low Energy Microcontroller Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5240.0 | 0.14 | ||
| CC ND | 15E | 5260.0 - 5320.0 | 0.075 | ||
| CC ND | 15E | 5500.0 - 5700.0 | 0.078 | ||
| CC | 15E | 5745.0 - 5825.0 | 0.137 |
| Power listed is maximum conducted output power. This device supports 20 MHz bandwidth mode. Single modular approval for mobile RF exposure conditions. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
North American EMC Certification Services Inc 24889 Ferguson Ave Maple Ridge, BC, Canada |
Date of Grant: 06/10/2021 Application Dated: 06/10/2021 |
| Roland Corporation |
| 1-5-3, Shinmiyakoda |
| Kita-ku,Hamamatsu, Sizuoka,, 431-2103 Japan |
| Attention: Hisashi Ninomiya , Assistant Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | SOP424151A |
| Name of Grantee: | Roland Corporation |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | IEEE 802.11 a/b/g/n 1T1R WLAN and Bluetooth Low Energy Microcontroller Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5240.0 | 0.14 | ||
| CC ND | 15E | 5260.0 - 5320.0 | 0.075 |
| Class II Permissive Change for adding one new portable host platform (Brand: Roland, Model: WC-1; Brand : AZUREWAVE, Model: AW-CU108) with NII-2C and NII-3 bands disabled as described in this filing. The highest reported SAR value for body exposure condition is 1.06 W/kg. Power listed is maximum conducted output power. This device supports 20 MHz bandwidth mode. Single modular approval for mobile RF exposure conditions. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application fSnMx0Gj6WLDuRRG+zCNiw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Roland Corporation 1-5-3, Shinmiyakoda Kita-ku,Hamamatsu, Sizuoka,, 431-2103 Japan |
Date of Grant: 06/10/2021 Application Dated: 06/10/2021 |
| Attention: Hisashi Ninomiya , Assistant Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | SOP424151A |
| Name of Grantee: | Roland Corporation |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | IEEE 802.11 a/b/g/n 1T1R WLAN and Bluetooth Low Energy Microcontroller Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5240.0 | 0.14 | ||
| CC ND | 15E | 5260.0 - 5320.0 | 0.075 |
| Class II Permissive Change for adding one new portable host platform (Brand: Roland, Model: WC-1; Brand : AZUREWAVE, Model: AW-CU108) with NII-2C and NII-3 bands disabled as described in this filing. The highest reported SAR value for body exposure condition is 1.06 W/kg. Power listed is maximum conducted output power. This device supports 20 MHz bandwidth mode. Single modular approval for mobile RF exposure conditions. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
North American EMC Certification Services Inc 24889 Ferguson Ave Maple Ridge, BC, Canada |
Date of Grant: 04/29/2021 Application Dated: 04/29/2021 |
| Roland Corporation |
| 1-5-3, Shinmiyakoda |
| Kita-ku,Hamamatsu, Sizuoka,, 431-2103 Japan |
| Attention: Hisashi Ninomiya , Assistant Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | SOP424151A |
| Name of Grantee: | Roland Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | IEEE 802.11 a/b/g/n 1T1R WLAN and Bluetooth Low Energy Microcontroller Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.491 | ||
| CC | 15C | 2402.0 - 2480.0 | 0.003 |
| Power listed is maximum conducted output power. This device supports 20 MHz bandwidth mode for WLAN. Single modular approval for mobile RF exposure conditions. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application bKpd9VskrCejqMckimAjDA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Roland Corporation 1-5-3, Shinmiyakoda Kita-ku,Hamamatsu, Sizuoka,, 431-2103 Japan |
Date of Grant: 04/29/2021 Application Dated: 04/29/2021 |
| Attention: Hisashi Ninomiya , Assistant Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | SOP424151A |
| Name of Grantee: | Roland Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | IEEE 802.11 a/b/g/n 1T1R WLAN and Bluetooth Low Energy Microcontroller Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.491 | ||
| CC | 15C | 2402.0 - 2480.0 | 0.003 |
| Power listed is maximum conducted output power. This device supports 20 MHz bandwidth mode for WLAN. Single modular approval for mobile RF exposure conditions. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
North American EMC Certification Services Inc 24889 Ferguson Ave Maple Ridge, BC, Canada |
Date of Grant: 06/10/2021 Application Dated: 06/10/2021 |
| Roland Corporation |
| 1-5-3, Shinmiyakoda |
| Kita-ku,Hamamatsu, Sizuoka,, 431-2103 Japan |
| Attention: Hisashi Ninomiya , Assistant Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | SOP424151A |
| Name of Grantee: | Roland Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | IEEE 802.11 a/b/g/n 1T1R WLAN and Bluetooth Low Energy Microcontroller Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.491 | ||
| CC | 15C | 2402.0 - 2480.0 | 0.003 |
| Class II Permissive Change for adding one new portable host platform (Brand: Roland, Model: WC-1; Brand: AZUREWAVE, Model: AW-CU108) with NII-2C and NII-3 bands disabled as described in this filing. The highest reported SAR value for body exposure condition is 1.12 W/kg. Power listed is maximum conducted output power. This device supports 20 MHz bandwidth mode for WLAN. Single modular approval for mobile RF exposure conditions. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application 93ONPle9erYY4cKBAmOgig==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Roland Corporation 1-5-3, Shinmiyakoda Kita-ku,Hamamatsu, Sizuoka,, 431-2103 Japan |
Date of Grant: 06/10/2021 Application Dated: 06/10/2021 |
| Attention: Hisashi Ninomiya , Assistant Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | SOP424151A |
| Name of Grantee: | Roland Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | IEEE 802.11 a/b/g/n 1T1R WLAN and Bluetooth Low Energy Microcontroller Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.491 | ||
| CC | 15C | 2402.0 - 2480.0 | 0.003 |
| Class II Permissive Change for adding one new portable host platform (Brand: Roland, Model: WC-1; Brand: AZUREWAVE, Model: AW-CU108) with NII-2C and NII-3 bands disabled as described in this filing. The highest reported SAR value for body exposure condition is 1.12 W/kg. Power listed is maximum conducted output power. This device supports 20 MHz bandwidth mode for WLAN. Single modular approval for mobile RF exposure conditions. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: |