FCC ID SP8-FAP4100-010

Radio and sensor used to detect intrusion into areas of interest

by Innovative Wireless Technologies, Inc.

Grantee Code: SP8   Product Code: FAP4100010
Latest application date: 2012-04-25

FCC ID Device Details

FCC IDSP8-FAP4100-010
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeSP8
Product CodeFAP4100010
Applicant BusinessInnovative Wireless Technologies, Inc. 🇺🇸
Related Domains iwtwireless.com
Equipment ClassRadio and sensor used to detect intrusion into areas of interest
Test FirmRhein Tech Laboratories, Inc.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
902.47-926.97 MHzOriginal Equipment2012-04-25

Exhibits

DocumentTypeAvailableFile
User ManualUsers Manual2012-04-25PDF 1.1 MB
Internal PhotosInternal Photos2012-04-25PDF 1.5 MB
External PhotosExternal Photos2012-04-25PDF 570.6 KB
Label and LocationID Label/Location Info2012-04-25PDF 502.4 KB
Test Setup PhotosTest Setup Photos2012-04-25PDF 1.9 MB
Test Report RevTest Report2012-04-25PDF 758.4 KB
Agency LetterCover Letter(s)2012-04-25PDF 218.9 KB
Confidentiality LetterCover Letter(s)2012-04-25PDF 218.8 KB
Cover LettersCover Letter(s)2012-04-25PDF 105.9 KB
RF Exposure MPERF Exposure Info2012-04-25PDF 143.5 KB

Application Information

Application IDBP7ZMDevXP4jLlCKCYUNPw==
Final Action Date2012-04-25
Application PurposeOriginal Equipment
Applicant FRN0009408154
Model-FAP4100-010
Frequency Range902.47-926.97 MHz
Equipment ClassDSS - Part 15 Spread Spectrum Transmitter
Device DescriptionRadio and sensor used to detect intrusion into areas of interest
Responsible PartyGary L Raulerson, Jr., New Products Introduction Manager, graulerson@iwtwireless.com , 4343165230
Technical ContactRick McMurray, Rhein Tech Labs, atcbinfo@rheintech.com , 703-689-0459
Test FirmRichard McMurray, Rhein Tech Laboratories, Inc., rmcmurray@rheintech.com , 703-689-0368
TCB Emailhotline@acbcert.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceNo
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsPower Output listed is Conducted. This device is granted for use in Mobile only configurations in which the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

Applications

Application IDDatePurpose
BP7ZMDevXP4jLlCKCYUNPw==2012-04-25Original Equipment

Equipment Authorization

FrequencyOutputRules
902.47-926.97 MHz0.646000015C

Grants

TCB Grant - Application BP7ZMDevXP4jLlCKCYUNPw==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
Date of Grant: 04/25/2012

Application Dated: 04/24/2012
Innovative Wireless Technologies, Inc.
1100 Main Street
Lynchburg, VA 24504
 
Attention: Gary Raulerson, Jr. , New Products Introduction Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  SP8-FAP4100-010
Name of Grantee:  Innovative Wireless Technologies, Inc.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Radio and sensor used to detect intrusion into areas of interest
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 902.47  -  926.97 0.646  

Power Output listed is Conducted. This device is granted for use in Mobile only configurations in which the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

EAS Grant - Application BP7ZMDevXP4jLlCKCYUNPw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Innovative Wireless Technologies, Inc.
1100 Main Street
Lynchburg, VA 24504
United States
  Date of Grant: 04/25/2012

Application Dated: 04/24/2012
 
Attention: Gary Raulerson, Jr. , New Products Introduction Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  SP8-FAP4100-010
Name of Grantee:  Innovative Wireless Technologies, Inc.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Radio and sensor used to detect intrusion into areas of interest
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 902.47  -  926.97 0.646  

Power Output listed is Conducted. This device is granted for use in Mobile only configurations in which the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.



Mail To: