FCC ID SPD003
Airborne Particle Sensor
by CyberOptics Corporation
Grantee Code: SPD Product Code: 003
Latest application date: 2020-03-10
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2020-03-10 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2017-11-30 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2008-03-19 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2008-01-28 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2007-12-11 |
| 2402-2480 MHz | Change in identification of presently authorized equipment. Original FCC ID: POOWML-C40 Grant Date: 05/01/2006 | 2007-12-11 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| User Manual_20200121_v1 - 11_APS3-8025869-User-Guide-REV_A resize | Users Manual | 2020-03-31 | PDF 2.6 MB |
| User Manual_20171102_v1 - 11_11616692 AMS-8023533-REV_E (2) | Users Manual | 2018-01-01 | PDF 3.3 MB |
| Users Manual | Users Manual | 2008-03-19 | PDF 1.1 MB |
| User Manual | Users Manual | 2008-01-28 | PDF 1.8 MB |
| User Manual | Users Manual | 2007-12-11 | PDF 1.2 MB |
| Internal Photos_20200121_v1 - 5_APS3 internal photos | Internal Photos | 2020-03-31 | PDF 766.6 KB |
| Internal photo_label-module-example_APS3 | Internal Photos | 2020-03-31 | PDF 284.5 KB |
| 4_5_11616692 Pictures of AMS Sensors_internal photo | Internal Photos | 2018-01-01 | PDF 1.9 MB |
| Internal Photos | Internal Photos | 2008-03-19 | PDF 769.4 KB |
| Internal Photos | Internal Photos | 2008-01-28 | PDF 2.6 MB |
| Internal Photos | Internal Photos | 2007-12-11 | PDF 1.4 MB |
| External Photos_20200121_v1 - 4_APS3 external photos | External Photos | 2020-03-10 | PDF 5.5 MB |
| External Photos_20171102_v1 - 4_5_11616692 Pictures of AMS Sensors | External Photos | 2018-01-01 | PDF 2 MB |
| External Photos | External Photos | 2008-03-19 | PDF 424.3 KB |
| External Photos | External Photos | 2008-01-28 | PDF 1.1 MB |
| External Photos | External Photos | 2007-12-11 | PDF 1,004 KB |
| External Photos | External Photos | 2007-12-11 | PDF 191.9 KB |
| ID Label & Location Info._20200121_v1 - 6 7_Labels and location | ID Label/Location Info | 2020-03-10 | PDF 684.6 KB |
| 6 7_11616692 Module Label | ID Label/Location Info | 2017-11-30 | PDF 304.5 KB |
| ID Label & Location Info._20171102_v1 - 6_7_11616692 Label and Placement AMS Sen | ID Label/Location Info | 2017-11-30 | PDF 557.1 KB |
| FCC ID Label | ID Label/Location Info | 2008-03-19 | PDF 391 KB |
| Antenna Info | Operational Description | 2008-03-19 | PDF 387.3 KB |
| Antenna Info | Operational Description | 2008-01-28 | PDF 229.1 KB |
| Antenna Info | Operational Description | 2007-12-11 | PDF 663.7 KB |
| Test Setup Photos_20200121_v1 - 2_R12444044-EP5 v1 BT FCC ISED C2PC SETUP PHOTOS | Test Setup Photos | 2020-03-31 | PDF 2.9 MB |
| Test Setup Photos_20171102_v1 - 2_11616692 Setup Photos R11616692-E1Q v1 QUARTZ | Test Setup Photos | 2018-01-01 | PDF 775.1 KB |
| Test Setup Photos_20171102_v1 - 2_11616692 Setup Photos R11616692-E1C v1 CARBON | Test Setup Photos | 2018-01-01 | PDF 946.8 KB |
| Test Setup Photos | Test Setup Photos | 2008-03-19 | PDF 182.8 KB |
| Test Setup Photos | Test Setup Photos | 2008-01-28 | PDF 1.5 MB |
| Test Setup Photos | Test Setup Photos | 2007-12-11 | PDF 383.7 KB |
| R12444044-E5 v2 BT FCC ISED C2PC REPORT | Test Report | 2020-03-10 | PDF 2 MB |
| Test Report_20171102_v1 - 1_11616692 R11616692-E1C v1 CARBON BT FCC REPORT | Test Report | 2017-11-30 | PDF 909.2 KB |
| Test Report_20171102_v1 - 1_11616692 R11616692-E1Q v1 QUARTZ BT FCC REPORT | Test Report | 2017-11-30 | PDF 1.7 MB |
| Test Report | Test Report | 2008-03-19 | PDF 558.9 KB |
| Test Report | Test Report | 2008-01-28 | PDF 646.4 KB |
| Test Report | Test Report | 2007-12-11 | PDF 774.1 KB |
| Attestation regarding FCC statement | Attestation Statements | 2007-12-11 | PDF 533.1 KB |
| 14_FCC request for confidentiality_V2 | Cover Letter(s) | 2020-03-10 | PDF 215 KB |
| Cover Letters_20200121_v1 - 19_FCC agent auth letter | Cover Letter(s) | 2020-03-10 | PDF 76.7 KB |
| Cover Letters_20200121_v1 - Cyberoptics FCC C2PC Cover Letter APS3 | Cover Letter(s) | 2020-03-10 | PDF 47.2 KB |
| Cover Letters_20171102_v1 - 14_11616692 CyberOptics FCC Request for Confidential | Cover Letter(s) | 2017-11-30 | PDF 48.2 KB |
| Cover Letters_20171102_v1 - 19_11616692 CyberOptics FCC Agent Auth.docx | Cover Letter(s) | 2017-11-30 | PDF 76.6 KB |
| Cover Letters_20171114_v1 - CyberOptics FCC C2PC Cover Letter | Cover Letter(s) | 2017-11-30 | PDF 41.4 KB |
| Compliance Opinion | Cover Letter(s) | 2008-03-19 | PDF 15.5 KB |
| Cover letter | Cover Letter(s) | 2008-03-19 | PDF 28.7 KB |
| Compliance Opinion | Cover Letter(s) | 2008-01-28 | PDF 15.5 KB |
| Cover letter | Cover Letter(s) | 2008-01-28 | PDF 26.2 KB |
| Agent Authorization letter | Cover Letter(s) | 2007-12-11 | PDF 16.5 KB |
| Compliance Opinion | Cover Letter(s) | 2007-12-11 | PDF 15.3 KB |
| Compliance Opinion | Cover Letter(s) | 2007-12-11 | PDF 15.4 KB |
| Cover letter | Cover Letter(s) | 2007-12-11 | PDF 16.4 KB |
| Cover letter | Cover Letter(s) | 2007-12-11 | PDF 21.3 KB |
| RF Exposure Info._20200121_v1 - 3_R12444044-E4 v1 MPE REPORT | RF Exposure Info | 2020-03-10 | PDF 361.6 KB |
| 3_11616692 v1 RF Exposure Report | RF Exposure Info | 2017-11-30 | PDF 373.9 KB |
| RF Exposure | RF Exposure Info | 2008-03-19 | PDF 14.9 KB |
| RF Exposure | RF Exposure Info | 2008-01-28 | PDF 14.7 KB |
| RF Exposure | RF Exposure Info | 2007-12-11 | PDF 14.9 KB |
| APS3 System Block Diagram_V2 Metadata only | Block Diagram | PDF 415.5 KB | |
| Block Diagrams_20171114_v2 - 10_11616692 AMS System Block Diagram Metadata only | Block Diagram | PDF 184 KB | |
| Schematics_20171102_v1 - 8_11616692 8024055RB Metadata only | Schematics | PDF 1.6 MB | |
| Schematics_20200121_v1 - 8_8025423 Schematics Metadata only | Schematics | PDF 2.6 MB | |
| 12_APS3 and APS3-FPD RF Antenna Desocription_V5 Metadata only | Operational Description | PDF 1.8 MB | |
| Operational Description_20171102_v1 - 9_11616692 8024674 Electrical Design Decri Metadata only | Operational Description | PDF 4.9 MB | |
| Operational Description_20200121_v1 - 9_8026588 Electrical Design Description AP Metadata only | Operational Description | PDF 2.8 MB | |
| Parts List & Tune Up Info._20171102_v1 - 12_11616692 AMS RF Antenna Description Metadata only | Operational Description | PDF 747.9 KB |
Application Information
| Application ID | iRi9Os1QyNDD58zyHRqlMw== |
|---|---|
| Final Action Date | 2020-03-10 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0012152690 |
| Model | 003 |
| Frequency Range | 2402-2480 MHz |
| Equipment Class | DSS - Part 15 Spread Spectrum Transmitter |
| Device Description | Airborne Particle Sensor |
| Responsible Party | Denis Langlois, Senior Electrical Engineer, dlanglois@cyberoptics.com  , 7635425842 |
| Test Firm | Rick Titus, UL LLC, rick.a.titus@ul.com  , 847-272-8800 |
| TCB Email | LST.FRE.CertNotice@ul.com |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | Yes |
| Short-Term Confidentiality Date | 03/31/2020 |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Class II permissive change to install the wireless module into Airborne Particle Sensor host. Modular approval. Power output listed is conducted. This module may only be installed by the grantee. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. This transmitter must not be collocated or operated in conjunction with any other antenna or transmitter. In mobile configurations, this device must be installed to provide a minimum separation distance of 20 cm. between the antenna and all persons. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| iRi9Os1QyNDD58zyHRqlMw== | 2020-03-10 | Class II permissive change or modification of presently authorized equipment |
| UUZqvjZIAHoji++eIhsQuA== | 2017-11-30 | Class II permissive change or modification of presently authorized equipment |
| UG7h7JuodWRqYPN3CKBdGg== | 2008-03-19 | Class II permissive change or modification of presently authorized equipment |
| 7aIoBI8dWyHUwsL3/fU1BQ== | 2008-01-28 | Class II permissive change or modification of presently authorized equipment |
| t2uqb0Z03ZANGgwG52PL+w== | 2007-12-11 | Class II permissive change or modification of presently authorized equipment |
| JXVyOL2ivyZUOmKD9z5Cew== | 2007-12-11 | Change in identification of presently authorized equipment. Original FCC ID: POOWML-C40 Grant Date: 05/01/2006 |
Equipment Authorization
| Frequency | Output | Rules |
|---|---|---|
| 2402-2480 MHz | 0.0130300 | 15C |
Grants
TCB Grant - Application UUZqvjZIAHoji++eIhsQuA==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538 |
Date of Grant: 11/30/2017 Application Dated: 11/22/2017 |
| CyberOptics Corporation |
| 5900 Golden Hills Drive |
| Minneapolis, MN 55416 |
| Attention: Denis Langlois , Senior Electrical Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | SPD003 |
| Name of Grantee: | CyberOptics Corporation |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | WML-C40 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.01303 |
| Class II permissive change to add the specific hosts. Modular approval. Power output listed is conducted. This module may only be installed by the grantee. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. This transmitter must not be collocated or operated in conjunction with any other antenna or transmitter. In mobile configurations, this device must be installed to provide a minimum separation distance of 20 cm. between the antenna and all persons. |
EAS Grant - Application UUZqvjZIAHoji++eIhsQuA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
CyberOptics Corporation 5900 Golden Hills Drive Minneapolis, MN 55416 United States |
Date of Grant: 11/30/2017 Application Dated: 11/22/2017 |
| Attention: Denis Langlois , Senior Electrical Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | SPD003 |
| Name of Grantee: | CyberOptics Corporation |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | WML-C40 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.01303 |
| Class II permissive change to add the specific hosts. Modular approval. Power output listed is conducted. This module may only be installed by the grantee. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. This transmitter must not be collocated or operated in conjunction with any other antenna or transmitter. In mobile configurations, this device must be installed to provide a minimum separation distance of 20 cm. between the antenna and all persons. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Northwest EMC, Inc. 22975 NW Evergreen Parkway, Suite 400 Hillsboro, OR 97124 |
Date of Grant: 03/19/2008 Application Dated: 03/19/2008 |
| CyberOptics Semiconductor |
| 13555 SW Millikan Way |
| Beaverton, OR 97005 |
| Attention: Greg Huntzinger , Principal Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | SPD003 |
| Name of Grantee: | CyberOptics Semiconductor |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | WML-C40 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.01303 |
| Modular approval. Power output listed is conducted. This module may only be installed by the grantee. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. This transmitter must not be collocated or operated in conjunction with any other antenna or transmitter. In mobile configurations, this device must be installed to provide a minimum separation distance of 20 cm. between the antenna and all persons. |
EAS Grant - Application UG7h7JuodWRqYPN3CKBdGg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
CyberOptics Semiconductor 13555 SW Millikan Way Beaverton, OR 97005 United States |
Date of Grant: 03/19/2008 Application Dated: 03/19/2008 |
| Attention: Greg Huntzinger , Principal Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | SPD003 |
| Name of Grantee: | CyberOptics Semiconductor |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | WML-C40 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.01303 |
| Modular approval. Power output listed is conducted. This module may only be installed by the grantee. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. This transmitter must not be collocated or operated in conjunction with any other antenna or transmitter. In mobile configurations, this device must be installed to provide a minimum separation distance of 20 cm. between the antenna and all persons. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Northwest EMC, Inc. 22975 NW Evergreen Parkway, Suite 400 Hillsboro, OR 97124 |
Date of Grant: 12/11/2007 Application Dated: 12/11/2007 |
| CyberOptics Semiconductor |
| 13555 SW Millikan Way |
| Beaverton, OR 97005 |
| Attention: Greg Huntzinger , Principal Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | SPD003 |
| Name of Grantee: | CyberOptics Semiconductor |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | WML-C40 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.01303 |
| Modular approval. Power output listed is conducted. This module may only be installed by the grantee. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. This transmitter must not be collocated or operated in conjunction with any other antenna or transmitter. In mobile configurations, this device must be installed to provide a minimum separation distance of 20 cm. between the antenna and all persons. |
EAS Grant - Application t2uqb0Z03ZANGgwG52PL+w==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
CyberOptics Semiconductor 13555 SW Millikan Way Beaverton, OR 97005 United States |
Date of Grant: 12/11/2007 Application Dated: 12/11/2007 |
| Attention: Greg Huntzinger , Principal Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | SPD003 |
| Name of Grantee: | CyberOptics Semiconductor |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | WML-C40 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.01303 |
| Modular approval. Power output listed is conducted. This module may only be installed by the grantee. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. This transmitter must not be collocated or operated in conjunction with any other antenna or transmitter. In mobile configurations, this device must be installed to provide a minimum separation distance of 20 cm. between the antenna and all persons. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Northwest EMC, Inc. 22975 NW Evergreen Parkway, Suite 400 Hillsboro, OR 97124 |
Date of Grant: 12/11/2007 Application Dated: 12/11/2007 |
| CyberOptics Semiconductor |
| 13555 SW Millikan Way |
| Beaverton, OR 97005 |
| Attention: Greg Huntzinger , Principal Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | SPD003 |
| Name of Grantee: | CyberOptics Semiconductor |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | WML-C40 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.01303 |
| Modular approval. Power output listed is conducted. This module may only be installed by the grantee. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. This transmitter must not be collocated or operated in conjunction with any other antenna or transmitter. |
EAS Grant - Application JXVyOL2ivyZUOmKD9z5Cew==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
CyberOptics Semiconductor 13555 SW Millikan Way Beaverton, OR 97005 United States |
Date of Grant: 12/11/2007 Application Dated: 12/11/2007 |
| Attention: Greg Huntzinger , Principal Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | SPD003 |
| Name of Grantee: | CyberOptics Semiconductor |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | WML-C40 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.01303 |
| Modular approval. Power output listed is conducted. This module may only be installed by the grantee. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. This transmitter must not be collocated or operated in conjunction with any other antenna or transmitter. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538 |
Date of Grant: 03/10/2020 Application Dated: 03/09/2020 |
| CyberOptics Corporation |
| 5900 Golden Hills Drive |
| Minneapolis, MN 55416 |
| Attention: Denis Langlois , Senior Electrical Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | SPD003 |
| Name of Grantee: | CyberOptics Corporation |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Airborne Particle Sensor |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.01303 |
| Class II permissive change to install the wireless module into Airborne Particle Sensor host. Modular approval. Power output listed is conducted. This module may only be installed by the grantee. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. This transmitter must not be collocated or operated in conjunction with any other antenna or transmitter. In mobile configurations, this device must be installed to provide a minimum separation distance of 20 cm. between the antenna and all persons. |
EAS Grant - Application iRi9Os1QyNDD58zyHRqlMw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
CyberOptics Corporation 5900 Golden Hills Drive Minneapolis, MN 55416 United States |
Date of Grant: 03/10/2020 Application Dated: 03/09/2020 |
| Attention: Denis Langlois , Senior Electrical Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | SPD003 |
| Name of Grantee: | CyberOptics Corporation |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Airborne Particle Sensor |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.01303 |
| Class II permissive change to install the wireless module into Airborne Particle Sensor host. Modular approval. Power output listed is conducted. This module may only be installed by the grantee. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. This transmitter must not be collocated or operated in conjunction with any other antenna or transmitter. In mobile configurations, this device must be installed to provide a minimum separation distance of 20 cm. between the antenna and all persons. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Northwest EMC, Inc. 22975 NW Evergreen Parkway, Suite 400 Hillsboro, OR 97124 |
Date of Grant: 01/28/2008 Application Dated: 01/28/2008 |
| CyberOptics Semiconductor |
| 13555 SW Millikan Way |
| Beaverton, OR 97005 |
| Attention: Greg Huntzinger , Principal Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | SPD003 |
| Name of Grantee: | CyberOptics Semiconductor |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | WML-C40 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.01303 |
| Modular approval. Power output listed is conducted. This module may only be installed by the grantee. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. This transmitter must not be collocated or operated in conjunction with any other antenna or transmitter. In mobile configurations, this device must be installed to provide a minimum separation distance of 20 cm. between the antenna and all persons. |
EAS Grant - Application 7aIoBI8dWyHUwsL3/fU1BQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
CyberOptics Semiconductor 13555 SW Millikan Way Beaverton, OR 97005 United States |
Date of Grant: 01/28/2008 Application Dated: 01/28/2008 |
| Attention: Greg Huntzinger , Principal Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | SPD003 |
| Name of Grantee: | CyberOptics Semiconductor |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | WML-C40 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.01303 |
| Modular approval. Power output listed is conducted. This module may only be installed by the grantee. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. This transmitter must not be collocated or operated in conjunction with any other antenna or transmitter. In mobile configurations, this device must be installed to provide a minimum separation distance of 20 cm. between the antenna and all persons. |
| Mail To: |