FCC ID SPT-CM11B-01
WLAN transmitter module
by Teldat GmbH
Grantee Code: SPT Product Code: CM11B01
Latest application date: 2005-12-08
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2005-12-08 |
| 2412-2462 MHz | Original Equipment | 2004-11-26 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Users Manual | Users Manual | 2004-11-26 | PDF 436.5 KB |
| Internal Photos | Internal Photos | 2004-11-26 | PDF 99.3 KB |
| External Photos | External Photos | 2004-11-26 | PDF 99.3 KB |
| Label Info | ID Label/Location Info | 2004-11-26 | PDF 181.5 KB |
| Antenna Description 1 | Operational Description | 2005-12-08 | PDF 166.9 KB |
| Antenna Description 2 | Operational Description | 2005-12-08 | PDF 59.5 KB |
| Test Setup Photos | Test Setup Photos | 2005-12-08 | PDF 74.2 KB |
| Test Setup Photos | Test Setup Photos | 2004-11-26 | PDF 92 KB |
| Test Report | Test Report | 2005-12-08 | PDF 260 KB |
| Test Report | Test Report | 2004-11-26 | PDF 702.9 KB |
| Request Class II Change | Cover Letter(s) | 2005-12-08 | PDF 20.1 KB |
| Applicant Letter | Cover Letter(s) | 2004-11-26 | PDF 370.4 KB |
| Declaratation Antenna Types | Cover Letter(s) | 2004-11-26 | PDF 7.8 KB |
| Letter Modular Approval | Cover Letter(s) | 2004-11-26 | PDF 8.4 KB |
| Request for Confidentiality | Cover Letter(s) | 2004-11-26 | PDF 19.7 KB |
| MPE | RF Exposure Info | 2004-11-26 | PDF 77.6 KB |
| RF Exposure Calculation | RF Exposure Info | 2004-11-26 | PDF 87.9 KB |
| Block Diagram Metadata only | Block Diagram | PDF 9.7 KB | |
| Schematics Metadata only | Schematics | PDF 198.6 KB | |
| Description of Operation Metadata only | Operational Description | PDF 344.3 KB |
Application Information
| Application ID | VAjB+yBMJEMRKUTooGpLUQ== |
|---|---|
| Final Action Date | 2005-12-08 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0017734633 |
| Model | CM11B-01 |
| Frequency Range | 2412-2462 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | WLAN transmitter module |
| Responsible Party | Uwe Unterberger, uwe.unterberger@teldat.de  , +49 - 911 - 9673 0 |
| Technical Contact | Rolf Leukel, Funkwerk Enterprise Communications GmbH, rolf.leukel@funkwerk-ec.com  , +49 180 3009191620 |
| Non-Technical Contact | Dieter Froehlich, Emitel AG, dieter.froehlich@emitel.de  , +49 9421 9482 0 |
| Test Firm | Dieter Froehlich, Emitel AG, dieter.froelich@emitel.de , 0049-9424-9782-0 |
| TCB Email | selck.bernd@phoenix-testlab.de  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | No |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Modular Approval. Power Output listed is conducted. Approval is limited to OEM installation only. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| VAjB+yBMJEMRKUTooGpLUQ== | 2005-12-08 | Class II permissive change or modification of presently authorized equipment |
| HLsgyIxYN5zG41LHi6FAvQ== | 2004-11-26 | Original Equipment |
Equipment Authorization
| Frequency | Output | Rules |
|---|---|---|
| 2412-2462 MHz | 0.0910000 | 15C |
Grants
TCB Grant - Application VAjB+yBMJEMRKUTooGpLUQ==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
PHOENIX TESTLAB GmbH Koenigswinkel 10 32825 Blomberg, Germany |
Date of Grant: 12/08/2005 Application Dated: 12/08/2005 |
| Teldat GmbH |
| Südwestpark 94 |
| Nuremberg, 90449 Germany |
| Attention: Uwe Unterberger |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | SPT-CM11B-01 |
| Name of Grantee: | Teldat GmbH |
| Equipment Class: | Digital Transmission System |
| Notes: | WLAN transmitter module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.091 |
| Modular Approval. Power Output listed is conducted. Approval is limited to OEM installation only. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
EAS Grant - Application VAjB+yBMJEMRKUTooGpLUQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Teldat GmbH Südwestpark 94 Nuremberg, 90449 Germany |
Date of Grant: 12/08/2005 Application Dated: 12/08/2005 |
| Attention: Uwe Unterberger |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | SPT-CM11B-01 |
| Name of Grantee: | Teldat GmbH |
| Equipment Class: | Digital Transmission System |
| Notes: | WLAN transmitter module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.091 |
| Modular Approval. Power Output listed is conducted. Approval is limited to OEM installation only. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
PHOENIX TESTLAB GmbH Koenigswinkel 10 32825 Blomberg, Germany |
Date of Grant: 11/26/2004 Application Dated: 11/26/2004 |
| Teldat GmbH |
| Südwestpark 94 |
| Nuremberg, 90449 Germany |
| Attention: Uwe Unterberger |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | SPT-CM11B-01 |
| Name of Grantee: | Teldat GmbH |
| Equipment Class: | Digital Transmission System |
| Notes: | WLAN transmitter module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.091 |
| Modular Approval. Power Output listed is conducted. Approval is limited to OEM installation only. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
EAS Grant - Application HLsgyIxYN5zG41LHi6FAvQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Teldat GmbH Südwestpark 94 Nuremberg, 90449 Germany |
Date of Grant: 11/26/2004 Application Dated: 11/26/2004 |
| Attention: Uwe Unterberger |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | SPT-CM11B-01 |
| Name of Grantee: | Teldat GmbH |
| Equipment Class: | Digital Transmission System |
| Notes: | WLAN transmitter module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.091 |
| Modular Approval. Power Output listed is conducted. Approval is limited to OEM installation only. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
| Mail To: |