FCC ID SQB-NIVISMOD0001
802.15 Modular Transmitter
by HDJ WIRELESS ENTERPRISE, LLC d/b/a NIVIS
Grantee Code: SQB Product Code: NIVISMOD0001
Latest application date: 2009-12-02
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2405-2475 MHz | Class II permissive change or modification of presently authorized equipment | 2009-12-02 |
| 2405-2475 MHz | Class II permissive change or modification of presently authorized equipment | 2009-10-21 |
| 2405-2475 MHz | Original Equipment | 2008-08-09 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| User Manual | Users Manual | 2009-12-02 | PDF 107.5 KB |
| Users Manual | Users Manual | 2009-10-21 | PDF 107.6 KB |
| user manual | Users Manual | 2008-08-09 | PDF 60.5 KB |
| internal photos | Internal Photos | 2008-08-09 | PDF 251.6 KB |
| Antenna Photo | External Photos | 2009-12-02 | PDF 110.9 KB |
| External Photos Revised | External Photos | 2009-10-21 | PDF 881.4 KB |
| external photos | External Photos | 2008-08-09 | PDF 85.9 KB |
| Id label | ID Label/Location Info | 2008-08-09 | PDF 130.7 KB |
| Test Setup Photos | Test Setup Photos | 2009-12-02 | PDF 427.1 KB |
| Test Photos Revised | Test Setup Photos | 2009-10-21 | PDF 1 MB |
| test setup photos | Test Setup Photos | 2008-08-09 | PDF 2.6 MB |
| Test Report | Test Report | 2009-12-02 | PDF 625.5 KB |
| Test Report Revised | Test Report | 2009-10-21 | PDF 620.9 KB |
| test report | Test Report | 2008-08-09 | PDF 3.2 MB |
| Agency letter | Cover Letter(s) | 2009-12-02 | PDF 57.9 KB |
| Cover Letter | Cover Letter(s) | 2009-12-02 | PDF 31.8 KB |
| Agency Letter | Cover Letter(s) | 2009-10-21 | PDF 57.9 KB |
| PC Cover Letter | Cover Letter(s) | 2009-10-21 | PDF 31 KB |
| LMA approval request letter | Cover Letter(s) | 2008-08-09 | PDF 37.2 KB |
| agent letter | Cover Letter(s) | 2008-08-09 | PDF 106.1 KB |
| confidentiality request letter | Cover Letter(s) | 2008-08-09 | PDF 33.4 KB |
| RF Exposure MPE | RF Exposure Info | 2009-12-02 | PDF 22 KB |
| RF Exposure Info Revised | RF Exposure Info | 2009-10-21 | PDF 22 KB |
| MPE info | RF Exposure Info | 2008-08-09 | PDF 52.6 KB |
Application Information
| Application ID | PuYd6LdAfHFQn0a2UB9k5A== |
|---|---|
| Final Action Date | 2009-12-02 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0012192977 |
| Model | -NIVISMOD0001 |
| Frequency Range | 2405-2475 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | 802.15 Modular Transmitter |
| Responsible Party | Kevin Douglas Scott, Dir of Hardware Engineering, kevin.scott@nivis.com  , 678-202-6841 |
| Technical Contact | Sandi McEnery, US Tech, smcenery@ustech-lab.com  , 770-740-0717 |
| Test Firm | George Yang, US Tech, gyang@ustech-lab.com , 7707400717 |
| TCB Email | Hotline@atcb.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | No |
| Grant Deferral | No |
| Modular Equipment | Limited Single Modular Approval |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Limited Modular Approval. Power Output listed is Conducted. Approval is limited to Grantee installation only in devices that provide regulated 3.3 VDC to the module to guarantee stable power supply according to the requirements of DA 00-1407 and with the antennas documented in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| PuYd6LdAfHFQn0a2UB9k5A== | 2009-12-02 | Class II permissive change or modification of presently authorized equipment |
| YNNdLlJwUxLxTWPyQVYDDg== | 2009-10-21 | Class II permissive change or modification of presently authorized equipment |
| rojC9WvhSw9hkrQCfoEQXg== | 2008-08-09 | Original Equipment |
Equipment Authorization
| Frequency | Output | Rules |
|---|---|---|
| 2405-2475 MHz | 0.1580000 | 15C |
Grants
TCB Grant - Application YNNdLlJwUxLxTWPyQVYDDg==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 10/21/2009 Application Dated: 10/21/2009 |
| Nivis, LLC |
| 200 Galleria Parkway |
| Suite 440 |
| Atlanta, GA 30339 |
| Attention: Kevin Scott , Dir of Hardware Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | SQB-NIVISMOD0001 |
| Name of Grantee: | Nivis, LLC |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.15 Modular Transmitter |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2405.0 - 2475.0 | 0.158 |
| Limited Modular Approval. Power Output listed is Conducted. Approval is limited to Grantee installation only in devices that provide regulated 3.3 VDC to the module to guarantee stable power supply according to the requirements of DA 00-1407 and with the antennas documented in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
EAS Grant - Application YNNdLlJwUxLxTWPyQVYDDg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Nivis, LLC 200 Galleria Parkway Suite 440 Atlanta, GA 30339 United States |
Date of Grant: 10/21/2009 Application Dated: 10/21/2009 |
| Attention: Kevin Scott , Dir of Hardware Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | SQB-NIVISMOD0001 |
| Name of Grantee: | Nivis, LLC |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.15 Modular Transmitter |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2405.0 - 2475.0 | 0.158 |
| Limited Modular Approval. Power Output listed is Conducted. Approval is limited to Grantee installation only in devices that provide regulated 3.3 VDC to the module to guarantee stable power supply according to the requirements of DA 00-1407 and with the antennas documented in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 08/09/2008 Application Dated: 08/08/2008 |
| Nivis, LLC |
| 200 Galleria Parkway |
| Suite 440 |
| Atlanta, GA 30339 |
| Attention: Kevin Scott , Dir of Hardware Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | SQB-NIVISMOD0001 |
| Name of Grantee: | Nivis, LLC |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.15 Modular Transmitter |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2405.0 - 2475.0 | 0.158 |
| Limited Modular Approval. Power Output listed is Conducted. Approval is limited to Grantee installation only in devices that provide regulated 3.3 VDC to the module to guarantee stable power supply according to the requirements of DA 00-1407 and with the antennas documented in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| Limited Single Modular |
EAS Grant - Application rojC9WvhSw9hkrQCfoEQXg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Nivis, LLC 200 Galleria Parkway Suite 440 Atlanta, GA 30339 United States |
Date of Grant: 08/09/2008 Application Dated: 08/08/2008 |
| Attention: Kevin Scott , Dir of Hardware Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | SQB-NIVISMOD0001 |
| Name of Grantee: | Nivis, LLC |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.15 Modular Transmitter |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2405.0 - 2475.0 | 0.158 |
| Limited Modular Approval. Power Output listed is Conducted. Approval is limited to Grantee installation only in devices that provide regulated 3.3 VDC to the module to guarantee stable power supply according to the requirements of DA 00-1407 and with the antennas documented in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| Limited Single Modular |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 12/02/2009 Application Dated: 12/01/2009 |
| Nivis, LLC |
| 200 Galleria Parkway |
| Suite 440 |
| Atlanta, GA 30339 |
| Attention: Kevin Scott , Dir of Hardware Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | SQB-NIVISMOD0001 |
| Name of Grantee: | Nivis, LLC |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.15 Modular Transmitter |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2405.0 - 2475.0 | 0.158 |
| Limited Modular Approval. Power Output listed is Conducted. Approval is limited to Grantee installation only in devices that provide regulated 3.3 VDC to the module to guarantee stable power supply according to the requirements of DA 00-1407 and with the antennas documented in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
EAS Grant - Application PuYd6LdAfHFQn0a2UB9k5A==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Nivis, LLC 200 Galleria Parkway Suite 440 Atlanta, GA 30339 United States |
Date of Grant: 12/02/2009 Application Dated: 12/01/2009 |
| Attention: Kevin Scott , Dir of Hardware Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | SQB-NIVISMOD0001 |
| Name of Grantee: | Nivis, LLC |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.15 Modular Transmitter |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2405.0 - 2475.0 | 0.158 |
| Limited Modular Approval. Power Output listed is Conducted. Approval is limited to Grantee installation only in devices that provide regulated 3.3 VDC to the module to guarantee stable power supply according to the requirements of DA 00-1407 and with the antennas documented in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| Mail To: |