FCC ID SQG-MSD45N
45 Series Pluggable module
by Laird Connectivity LLC
Grantee Code: SQG Product Code: MSD45N
Latest application date: 2022-04-28
Device Images
FCC ID Device Details
| FCC ID | SQG-MSD45N |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | SQG |
| Product Code | MSD45N |
| Applicant Business | Laird Connectivity LLC 🇺🇸 |
| Related Domains |  lairdconnect.com  icertifi.com.tw |
| Equipment Class | 45 Series Pluggable module |
| Test Firm | International Certification Corp. |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2022-04-28 |
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2022-04-28 |
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2020-02-19 |
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2020-02-19 |
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2015-09-15 |
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2015-09-15 |
| 2412-2462 MHz | Original Equipment | 2013-09-02 |
| 5180-5240 MHz | Original Equipment | 2013-09-02 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| user manual | Users Manual | 2014-01-20 | PDF 1.2 MB |
| Internal Photos | Internal Photos | 2022-04-28 | PDF 469.3 KB |
| Internal photo | Internal Photos | 2020-02-19 | PDF 872.9 KB |
| Internal Photos | Internal Photos | 2015-09-15 | PDF 293 KB |
| internal photo | Internal Photos | 2014-01-20 | PDF 556.1 KB |
| External Photos | External Photos | 2022-04-28 | PDF 263.6 KB |
| External Photo | External Photos | 2020-02-19 | PDF 307.7 KB |
| External Photos | External Photos | 2015-09-15 | PDF 56.7 KB |
| external photo | External Photos | 2014-01-20 | PDF 2.5 MB |
| ID label/Location info | ID Label/Location Info | 2013-09-02 | PDF 150.7 KB |
| Test Setup Photos_DFS | Test Setup Photos | 2022-04-28 | PDF 143.7 KB |
| Test Setup Photos_DTS | Test Setup Photos | 2022-04-28 | PDF 1.8 MB |
| Test Setup Photos_NII | Test Setup Photos | 2022-04-28 | PDF 2.4 MB |
| Test Setup Photos_DTS | Test Setup Photos | 2020-02-19 | PDF 3 MB |
| Test Setup Photos_NII | Test Setup Photos | 2020-02-19 | PDF 4 MB |
| Test Setup Photos | Test Setup Photos | 2015-09-15 | PDF 2.7 MB |
| test setup photo (2.4G, DTS) | Test Setup Photos | 2014-01-20 | PDF 2.1 MB |
| test setup photo (5G, NII) | Test Setup Photos | 2014-01-20 | PDF 2.2 MB |
| test setup photo (DFS) | Test Setup Photos | 2014-01-20 | PDF 255.8 KB |
| test setup photo(5G, DTS) | Test Setup Photos | 2014-01-20 | PDF 2.2 MB |
| Test Report_DFS | Test Report | 2022-04-28 | PDF 883.6 KB |
| Test Report_DTS | Test Report | 2022-04-28 | PDF 889.4 KB |
| Test Report_NII | Test Report | 2022-04-28 | PDF 1.3 MB |
| Test Report_DTS | Test Report | 2020-02-19 | PDF 1.9 MB |
| Test Report_NII | Test Report | 2020-02-19 | PDF 3.5 MB |
| Test Report for 5G B1-B3 | Test Report | 2015-09-15 | PDF 680.3 KB |
| Test Report for 5G B4 | Test Report | 2015-09-15 | PDF 1.5 MB |
| Test report | Test Report | 2013-09-02 | PDF 2.3 MB |
| Test report-15.407 | Test Report | 2013-09-02 | PDF 2.8 MB |
| Test report-DFS | Test Report | 2013-09-02 | PDF 695.1 KB |
| C2PC Metadata only | Cover Letter(s) | 2022-04-28 | PDF 2.4 MB |
| C2PC revised | Cover Letter(s) | 2022-04-28 | PDF 2.5 MB |
| POA | Cover Letter(s) | 2022-04-28 | PDF 2.2 MB |
| C2PC | Cover Letter(s) | 2020-02-19 | PDF 472.4 KB |
| C2PC Letter | Cover Letter(s) | 2020-02-19 | PDF 472.4 KB |
| Confidentiality | Cover Letter(s) | 2020-02-19 | PDF 380 KB |
| POA | Cover Letter(s) | 2020-02-19 | PDF 143.3 KB |
| C2PC Letter | Cover Letter(s) | 2015-09-15 | PDF 98.2 KB |
| Confidentiality | Cover Letter(s) | 2015-09-15 | PDF 271.2 KB |
| POA | Cover Letter(s) | 2015-09-15 | PDF 355.1 KB |
| Ad-hoc Mode Declaration | Cover Letter(s) | 2013-09-02 | PDF 133 KB |
| DFS client declaration | Cover Letter(s) | 2013-09-02 | PDF 167.6 KB |
| Modular approval letter | Cover Letter(s) | 2013-09-02 | PDF 103.2 KB |
| confidentiality | Cover Letter(s) | 2013-09-02 | PDF 112.6 KB |
| declaration of authorization | Cover Letter(s) | 2013-09-02 | PDF 46.5 KB |
| RF Exp | RF Exposure Info | 2022-04-28 | PDF 434.1 KB |
| MPE | RF Exposure Info | 2020-02-19 | PDF 218.1 KB |
| RF Exposure Info | RF Exposure Info | 2015-09-15 | PDF 214.5 KB |
| RF exposure info | RF Exposure Info | 2013-09-02 | PDF 216.9 KB |
| SW Security for UNII Metadata only | Operational Description | PDF 126.7 KB | |
| Software Security Metadata only | Operational Description | PDF 548.2 KB |
Application Information
| Application ID | 4YAekhobY4RHh1d3tAI8Ow== |
|---|---|
| Final Action Date | 2022-04-28 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0022590616 |
| Model | MSD45N |
| Frequency Range | 5180-5240 MHz |
| Equipment Class | NII - Unlicensed National Information Infrastructure TX |
| Device Description | 45 Series Pluggable module |
| Responsible Party | Brian Petted, Technology Leader, brian.petted@lairdconnect.com , 2624214974 |
| Agent | Gary Gary Gary, International Certification Corp., GaryChang@icertifi.com.tw , 886-3-271-8628 |
| Technical Contact | Gary Chang, International Certification Corp., GaryChang@icertifi.com.tw , 886-3-271-8628 |
| Non-Technical Contact | Wendy Liao, International Certification Corp., wendyLiao@icertifi.com.tw , 886-3-271-8629 |
| Test Firm | Fu-Cheng Chuang, International Certification Corp., Jeff@icertifi.com.tw , 886-3-271-8666 |
| TCB Email | certification@telefication.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | No |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | class II change: non-transmitter components change/the RF component of pin-to-pin compatible change Power output listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This device has 20 MHz bandwidth mode. DFS operation is slave without radar detection. Operations in 5150-5250 MHz band is for indoor use only. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| 4YAekhobY4RHh1d3tAI8Ow== | 2022-04-28 | Class II permissive change or modification of presently authorized equipment |
| 1j2xWz9sqjob2YXzaYL0vQ== | 2022-04-28 | Class II permissive change or modification of presently authorized equipment |
| QkvyjiQN2lqtR4DU8gpHsA== | 2020-02-19 | Class II permissive change or modification of presently authorized equipment |
| Hgw5n/14IdgjyfjMKC3L+w== | 2020-02-19 | Class II permissive change or modification of presently authorized equipment |
| ebvvxnj2jo+Np+faiTCBFw== | 2015-09-15 | Class II permissive change or modification of presently authorized equipment |
| XDC9IFXEWE9qYUbNt400bw== | 2015-09-15 | Class II permissive change or modification of presently authorized equipment |
| YyWeo2vq9SyOP0xq48VJsg== | 2013-09-02 | Original Equipment |
| 9+CMIW0yEdgCyH8wrDHa3g== | 2013-09-02 | Original Equipment |
Equipment Authorization
| Frequency | Output | Rules | Grant Notes |
|---|---|---|---|
| 2412-2462 MHz | 0.1800000 | 15C | CC |
| 2412-2462 MHz | 0.18 | 15C | CC |
| 5180-5240 MHz | 0.045 | 15E | CC |
| 5180-5240 MHz | 0.045 | 15E | 38, CC |
| 5260-5320 MHz | 0.048 | 15E | CC, ND |
| 5260-5320 MHz | 0.048 | 15E | 38, CC, ND |
| 5500-5700 MHz | 0.062 | 15E | CC, ND |
| 5500-5700 MHz | 0.062 | 15E | 38, CC, ND |
| 5745-5825 MHz | 0.24 | 15C | CC |
| 5745-5825 MHz | 0.24 | 15E | CC |
| 5745-5825 MHz | 0.24 | 15E | 38, CC |
Grants
TCB Grant - Application YyWeo2vq9SyOP0xq48VJsg==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Telefication B.V. Edisonstraat 12a Zevenaar, NL-6902 PK Netherlands |
Date of Grant: 09/02/2013 Application Dated: 08/30/2013 |
| Laird Technologies |
| 11160 Thompson Ave. |
| Lenexa, KS 66219 |
| Attention: Daniel Waters , Certiffications Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | SQG-MSD45N |
| Name of Grantee: | Laird Technologies |
| Equipment Class: | Digital Transmission System |
| Notes: | 45 Series Pluggable module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.18 | ||
| CC | 15C | 5745.0 - 5825.0 | 0.24 |
| Power output listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This device has 20 MHz bandwidth mode. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application YyWeo2vq9SyOP0xq48VJsg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Laird Technologies 11160 Thompson Ave. Lenexa, KS 66219 United States |
Date of Grant: 09/02/2013 Application Dated: 08/30/2013 |
| Attention: Daniel Waters , Certiffications Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | SQG-MSD45N |
| Name of Grantee: | Laird Technologies |
| Equipment Class: | Digital Transmission System |
| Notes: | 45 Series Pluggable module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.18 | ||
| CC | 15C | 5745.0 - 5825.0 | 0.24 |
| Power output listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This device has 20 MHz bandwidth mode. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Telefication B.V. Wilmersdorf 50 Apeldoorn, NL-7300 AC Netherlands |
Date of Grant: 09/15/2015 Application Dated: 09/15/2015 |
| Laird Connectivity LLC |
| W66N220 Commerce Court |
| Cedarburg, WI 53012 |
| Attention: Brian Petted , Technology Leader |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | SQG-MSD45N |
| Name of Grantee: | Laird Connectivity LLC |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | 45 Series Pluggable module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC | 15E | 5180.0 - 5240.0 | 0.045 | ||
| 38 CC ND | 15E | 5260.0 - 5320.0 | 0.048 | ||
| 38 CC ND | 15E | 5500.0 - 5700.0 | 0.062 | ||
| 38 CC | 15E | 5745.0 - 5825.0 | 0.24 |
| Power output listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This device has 20 MHz bandwidth mode. DFS operation is slave without radar detection. Operations in 5150-5250 MHz band is for indoor use only. Class II Change :This change is to comply with new rules for U-NII devices adopted under Docket No. 13-49 and to add Antenna(Model name : MG7018-41-000-R, MG7324-42-000-R) to the lists. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application XDC9IFXEWE9qYUbNt400bw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Laird Connectivity LLC W66N220 Commerce Court Cedarburg, WI 53012 United States |
Date of Grant: 09/15/2015 Application Dated: 09/15/2015 |
| Attention: Brian Petted , Technology Leader |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | SQG-MSD45N |
| Name of Grantee: | Laird Connectivity LLC |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | 45 Series Pluggable module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC | 15E | 5180.0 - 5240.0 | 0.045 | ||
| 38 CC ND | 15E | 5260.0 - 5320.0 | 0.048 | ||
| 38 CC ND | 15E | 5500.0 - 5700.0 | 0.062 | ||
| 38 CC | 15E | 5745.0 - 5825.0 | 0.24 |
| Power output listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This device has 20 MHz bandwidth mode. DFS operation is slave without radar detection. Operations in 5150-5250 MHz band is for indoor use only. Class II Change :This change is to comply with new rules for U-NII devices adopted under Docket No. 13-49 and to add Antenna(Model name : MG7018-41-000-R, MG7324-42-000-R) to the lists. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Telefication B.V. Wilmersdorf 50 Apeldoorn, NL-7300 AC Netherlands |
Date of Grant: 02/19/2020 Application Dated: 02/18/2020 |
| Laird Connectivity LLC |
| W66N220 Commerce Court |
| Cedarburg, WI 53012 |
| Attention: Brian Petted , Technology Leader |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | SQG-MSD45N |
| Name of Grantee: | Laird Connectivity LLC |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | 45 Series Pluggable module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5240.0 | 0.045 | ||
| CC ND | 15E | 5260.0 - 5320.0 | 0.048 | ||
| CC ND | 15E | 5500.0 - 5700.0 | 0.062 | ||
| CC | 15E | 5745.0 - 5825.0 | 0.24 |
| class II change: non-transmitter components change/the RF component of pin-to-pin compatible change/channel activation via the software/antenna addition of equivalent type with lesser gain Power output listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This device has 20 MHz bandwidth mode. DFS operation is slave without radar detection. Operations in 5150-5250 MHz band is for indoor use only. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application QkvyjiQN2lqtR4DU8gpHsA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Laird Connectivity LLC W66N220 Commerce Court Cedarburg, WI 53012 United States |
Date of Grant: 02/19/2020 Application Dated: 02/18/2020 |
| Attention: Brian Petted , Technology Leader |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | SQG-MSD45N |
| Name of Grantee: | Laird Connectivity LLC |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | 45 Series Pluggable module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5240.0 | 0.045 | ||
| CC ND | 15E | 5260.0 - 5320.0 | 0.048 | ||
| CC ND | 15E | 5500.0 - 5700.0 | 0.062 | ||
| CC | 15E | 5745.0 - 5825.0 | 0.24 |
| class II change: non-transmitter components change/the RF component of pin-to-pin compatible change/channel activation via the software/antenna addition of equivalent type with lesser gain Power output listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This device has 20 MHz bandwidth mode. DFS operation is slave without radar detection. Operations in 5150-5250 MHz band is for indoor use only. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Telefication B.V. Wilmersdorf 50 Apeldoorn, NL-7300 AC Netherlands |
Date of Grant: 02/19/2020 Application Dated: 02/18/2020 |
| Laird Connectivity LLC |
| W66N220 Commerce Court |
| Cedarburg, WI 53012 |
| Attention: Brian Petted , Technology Leader |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | SQG-MSD45N |
| Name of Grantee: | Laird Connectivity LLC |
| Equipment Class: | Digital Transmission System |
| Notes: | 45 Series Pluggable module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.18 |
| class II change: non-transmitter components change/the RF component of pin-to-pin compatible change/antenna addition of equivalent type with lesser gain Power output listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This device has 20 MHz bandwidth mode. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application Hgw5n/14IdgjyfjMKC3L+w==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Laird Connectivity LLC W66N220 Commerce Court Cedarburg, WI 53012 United States |
Date of Grant: 02/19/2020 Application Dated: 02/18/2020 |
| Attention: Brian Petted , Technology Leader |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | SQG-MSD45N |
| Name of Grantee: | Laird Connectivity LLC |
| Equipment Class: | Digital Transmission System |
| Notes: | 45 Series Pluggable module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.18 |
| class II change: non-transmitter components change/the RF component of pin-to-pin compatible change/antenna addition of equivalent type with lesser gain Power output listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This device has 20 MHz bandwidth mode. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Telefication B.V. Wilmersdorf 50 Apeldoorn, NL-7300 AC Netherlands |
Date of Grant: 09/15/2015 Application Dated: 09/15/2015 |
| Laird Connectivity LLC |
| W66N220 Commerce Court |
| Cedarburg, WI 53012 |
| Attention: Brian Petted , Technology Leader |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | SQG-MSD45N |
| Name of Grantee: | Laird Connectivity LLC |
| Equipment Class: | Digital Transmission System |
| Notes: | 45 Series Pluggable module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.18 |
| Power output listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This device has 20 MHz bandwidth mode. Class II Change :This change is to comply with new rules for U-NII devices adopted under Docket No. 13-49 and to add Antenna(Model name : MG7018-41-000-R, MG7324-42-000-R) to the lists. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application ebvvxnj2jo+Np+faiTCBFw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Laird Connectivity LLC W66N220 Commerce Court Cedarburg, WI 53012 United States |
Date of Grant: 09/15/2015 Application Dated: 09/15/2015 |
| Attention: Brian Petted , Technology Leader |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | SQG-MSD45N |
| Name of Grantee: | Laird Connectivity LLC |
| Equipment Class: | Digital Transmission System |
| Notes: | 45 Series Pluggable module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.18 |
| Power output listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This device has 20 MHz bandwidth mode. Class II Change :This change is to comply with new rules for U-NII devices adopted under Docket No. 13-49 and to add Antenna(Model name : MG7018-41-000-R, MG7324-42-000-R) to the lists. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Telefication B.V. Edisonstraat 12a Zevenaar, NL-6902 PK Netherlands |
Date of Grant: 09/02/2013 Application Dated: 08/30/2013 |
| Laird Technologies |
| 11160 Thompson Ave. |
| Lenexa, KS 66219 |
| Attention: Daniel Waters , Certiffications Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | SQG-MSD45N |
| Name of Grantee: | Laird Technologies |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | 45 Series Pluggable module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5240.0 | 0.045 | ||
| CC ND | 15E | 5260.0 - 5320.0 | 0.048 | ||
| CC ND | 15E | 5500.0 - 5700.0 | 0.062 |
| Power output listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This device has 20 MHz bandwidth mode. DFS operation is slave without radar detection. Operations in 5150-5250 MHz band is for indoor use only. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application 9+CMIW0yEdgCyH8wrDHa3g==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Laird Technologies 11160 Thompson Ave. Lenexa, KS 66219 United States |
Date of Grant: 09/02/2013 Application Dated: 08/30/2013 |
| Attention: Daniel Waters , Certiffications Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | SQG-MSD45N |
| Name of Grantee: | Laird Technologies |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | 45 Series Pluggable module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5240.0 | 0.045 | ||
| CC ND | 15E | 5260.0 - 5320.0 | 0.048 | ||
| CC ND | 15E | 5500.0 - 5700.0 | 0.062 |
| Power output listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This device has 20 MHz bandwidth mode. DFS operation is slave without radar detection. Operations in 5150-5250 MHz band is for indoor use only. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Telefication B.V. Wilmersdorf 50 Apeldoorn, NL-7300 AC Netherlands |
Date of Grant: 04/28/2022 Application Dated: 04/21/2022 |
| Laird Connectivity LLC |
| W66N220 Commerce Court |
| Cedarburg, WI 53012 |
| Attention: Brian Petted , Technology Leader |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | SQG-MSD45N |
| Name of Grantee: | Laird Connectivity LLC |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | 45 Series Pluggable module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5240.0 | 0.045 | ||
| CC ND | 15E | 5260.0 - 5320.0 | 0.048 | ||
| CC ND | 15E | 5500.0 - 5700.0 | 0.062 | ||
| CC | 15E | 5745.0 - 5825.0 | 0.24 |
| class II change: non-transmitter components change/the RF component of pin-to-pin compatible change Power output listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This device has 20 MHz bandwidth mode. DFS operation is slave without radar detection. Operations in 5150-5250 MHz band is for indoor use only. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application 4YAekhobY4RHh1d3tAI8Ow==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Laird Connectivity LLC W66N220 Commerce Court Cedarburg, WI 53012 United States |
Date of Grant: 04/28/2022 Application Dated: 04/21/2022 |
| Attention: Brian Petted , Technology Leader |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | SQG-MSD45N |
| Name of Grantee: | Laird Connectivity LLC |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | 45 Series Pluggable module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5240.0 | 0.045 | ||
| CC ND | 15E | 5260.0 - 5320.0 | 0.048 | ||
| CC ND | 15E | 5500.0 - 5700.0 | 0.062 | ||
| CC | 15E | 5745.0 - 5825.0 | 0.24 |
| class II change: non-transmitter components change/the RF component of pin-to-pin compatible change Power output listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This device has 20 MHz bandwidth mode. DFS operation is slave without radar detection. Operations in 5150-5250 MHz band is for indoor use only. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Telefication B.V. Wilmersdorf 50 Apeldoorn, NL-7300 AC Netherlands |
Date of Grant: 04/28/2022 Application Dated: 04/21/2022 |
| Laird Connectivity LLC |
| W66N220 Commerce Court |
| Cedarburg, WI 53012 |
| Attention: Brian Petted , Technology Leader |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | SQG-MSD45N |
| Name of Grantee: | Laird Connectivity LLC |
| Equipment Class: | Digital Transmission System |
| Notes: | 45 Series Pluggable module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.18 |
| class II change: non-transmitter components change/the RF component of pin-to-pin compatible change Power output listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This device has 20 MHz bandwidth mode. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application 1j2xWz9sqjob2YXzaYL0vQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Laird Connectivity LLC W66N220 Commerce Court Cedarburg, WI 53012 United States |
Date of Grant: 04/28/2022 Application Dated: 04/21/2022 |
| Attention: Brian Petted , Technology Leader |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | SQG-MSD45N |
| Name of Grantee: | Laird Connectivity LLC |
| Equipment Class: | Digital Transmission System |
| Notes: | 45 Series Pluggable module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.18 |
| class II change: non-transmitter components change/the RF component of pin-to-pin compatible change Power output listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This device has 20 MHz bandwidth mode. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: |