FCC ID SQGBL651

Bluetooth 5.0 Module w/Integrated PCB Antenna / Bluetooth 5.0 Module w/External Antenna

by Laird Connectivity LLC

Grantee Code: SQG   Product Code: BL651
Latest application date: 2018-08-29

FCC ID Device Details

FCC IDSQGBL651
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeSQG
Product CodeBL651
Applicant BusinessLaird Connectivity LLC 🇺🇸
Related Domains lairdconnect.com icertifi.com.tw
Equipment ClassBluetooth 5.0 Module w/Integrated PCB Antenna / Bluetooth 5.0 Module w/External Antenna
Test FirmInternational Certification Corp.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2402-2480 MHzOriginal Equipment2018-08-29

Exhibits

DocumentTypeAvailableFile
Users ManualUsers Manual2018-08-29PDF 2.1 MB
Internal PhotosInternal Photos2018-08-29PDF 385.3 KB
External PhotosExternal Photos2018-08-29PDF 117.1 KB
ID Label/Location InfoID Label/Location Info2018-08-29PDF 15.4 KB
Test Setup PhotosTest Setup Photos2018-08-29PDF 1.2 MB
Test ReportTest Report2018-08-29PDF 3 MB
ConfidentialityCover Letter(s)2018-08-29PDF 372.8 KB
Modular Approval RequestCover Letter(s)2018-08-29PDF 203.6 KB
POACover Letter(s)2018-08-29PDF 209.6 KB
SDoCCover Letter(s)2018-08-29PDF 206.3 KB
MPERF Exposure Info2018-08-29PDF 280.1 KB
Block Diagram Metadata onlyBlock DiagramPDF 124.1 KB
Schematics Metadata onlySchematicsPDF 479.9 KB
Operational Description Metadata onlyOperational DescriptionPDF 194.7 KB

Application Information

Application IDBXJYBfHw+60QlmxmGp1rrg==
Final Action Date2018-08-29
Application PurposeOriginal Equipment
Applicant FRN0022590616
ModelBL651
Frequency Range2402-2480 MHz
Equipment ClassDTS - Digital Transmission System
Device DescriptionBluetooth 5.0 Module w/Integrated PCB Antenna / Bluetooth 5.0 Module w/External Antenna
Responsible PartyBrian Petted, Technology Leader, brian.petted@lairdconnect.com , 2624214974
AgentGary Gary Gary, International Certification Corp., GaryChang@icertifi.com.tw , 886-3-271-8628
Technical ContactGary Chang, International Certification Corp., GaryChang@icertifi.com.tw , 886-3-271-8628
Non-Technical ContactInternational Certification Corp., wendyLiao@icertifi.com.tw , 886-3-271-8629
Test FirmFu-Cheng Chuang, International Certification Corp., Jeff@icertifi.com.tw , 886-3-271-8666
TCB Emailcertification@telefication.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentSingle Modular Approval
Composite DeviceNo
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsOutput power listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antennas used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance.

Applications

Application IDDatePurpose
BXJYBfHw+60QlmxmGp1rrg==2018-08-29Original Equipment

Equipment Authorization

FrequencyOutputRules
2402-2480 MHz0.003000015C

Grants

TCB Grant - Application BXJYBfHw+60QlmxmGp1rrg==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Telefication B.V.
Wilmersdorf 50
Apeldoorn, NL-7300 AC
Netherlands
Date of Grant: 08/29/2018

Application Dated: 08/28/2018
Laird Connectivity LLC
W66N220 Commerce Court
Cedarburg, WI 53012
 
Attention: Brian Petted , Technology Leader

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  SQGBL651
Name of Grantee:  Laird Connectivity LLC
Equipment Class: Digital Transmission System
Notes: Bluetooth 5.0 Module w/Integrated PCB Antenna / Bluetooth 5.0 Module w/External Antenna
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2402.0  -  2480.0 0.003  

Output power listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antennas used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance.

EAS Grant - Application BXJYBfHw+60QlmxmGp1rrg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Laird Connectivity LLC
W66N220 Commerce Court
Cedarburg, WI 53012
United States
  Date of Grant: 08/29/2018

Application Dated: 08/28/2018
 
Attention: Brian Petted , Technology Leader

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  SQGBL651
Name of Grantee:  Laird Connectivity LLC
Equipment Class: Digital Transmission System
Notes: Bluetooth 5.0 Module w/Integrated PCB Antenna / Bluetooth 5.0 Module w/External Antenna
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2402.0  -  2480.0 0.003  

Output power listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antennas used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance.



Mail To: