FCC ID SR7ST1000
RFID module
by Technologies Solutions Group, LLC
Grantee Code: SR7 Product Code: ST1000
Latest application date: 2013-07-07
FCC ID Device Details
| FCC ID | SR7ST1000 |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | SR7 |
| Product Code | ST1000 |
| Applicant Business | Technologies Solutions Group, LLC 🇺🇸 |
| Related Domains |  t-sgrp.com |
| Equipment Class | RFID module |
| Test Firm | MET Laboratories, Inc. |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 902.75-927.25 MHz | Class II permissive change or modification of presently authorized equipment | 2013-07-07 |
| 902.75-927.25 MHz | Change in identification of presently authorized equipment. Original FCC ID: QV5MERCURY6E Grant Date: 12/29/2010 | 2013-05-29 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| External Photos | External Photos | 2014-01-03 | PDF 307.8 KB |
| Label | ID Label/Location Info | 2013-05-29 | PDF 77.1 KB |
| Test Setup Photos | Test Setup Photos | 2014-01-03 | PDF 154.9 KB |
| Test Report | Test Report | 2013-07-07 | PDF 822.1 KB |
| Class II Permissive Change Letter | Cover Letter(s) | 2013-07-07 | PDF 67.4 KB |
| Long Term Confidentiality Request Letter | Cover Letter(s) | 2013-07-07 | PDF 68.9 KB |
| Short Term Confidentiality Request Letter | Cover Letter(s) | 2013-07-07 | PDF 89.4 KB |
| Change in ID Authorization Letter | Cover Letter(s) | 2013-05-29 | PDF 299.6 KB |
| Change in ID Request Letter | Cover Letter(s) | 2013-05-29 | PDF 219.7 KB |
| MPE | RF Exposure Info | 2013-07-07 | PDF 72.9 KB |
Application Information
| Application ID | JmRu/XOryEJpTNnTmgJ1MQ== |
|---|---|
| Final Action Date | 2013-07-07 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0022594436 |
| Model | ST1000 |
| Frequency Range | 902.75-927.25 MHz |
| Equipment Class | DSS - Part 15 Spread Spectrum Transmitter |
| Device Description | RFID module |
| Responsible Party | Brian Bolton, Director of OEM Mfg., brian.bolton@t-sgrp.com , 4435425546 |
| Technical Contact | Brian Bolton, Technologies Solutions Group, LLC, Brian.bolton@t-sgrp.com , 443-542-5546 |
| Non-Technical Contact | Tom Jackson, Technologies Solutions Group, LLC, Brian.bolton@t-sgrp.com , 443-542-5546 |
| Test Firm | Jon Fuhrman, MET Laboratories, Inc., jfuhrman@metlabs.com  , 4109491880 |
| TCB Email | tcbinfo@metlabs.com |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | Yes |
| Short-Term Confidentiality Date | 01/03/2014 |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Output power listed is conducted. Modular Approval for mobile RF Exposure conditions, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 23cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. This module will only be incorporated into this grantees host. Class II PC to add new antennas. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| JmRu/XOryEJpTNnTmgJ1MQ== | 2013-07-07 | Class II permissive change or modification of presently authorized equipment |
| csMkjpjF6yC+voP24BBqWg== | 2013-05-29 | Change in identification of presently authorized equipment. Original FCC ID: QV5MERCURY6E Grant Date: 12/29/2010 |
Equipment Authorization
| Frequency | Output | Rules |
|---|---|---|
| 902.75-927.25 MHz | 0.9770000 | 15C |
Grants
TCB Grant - Application JmRu/XOryEJpTNnTmgJ1MQ==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
MET Laboratories, Inc. 914 W. Patapsco Avenue Baltimore, MD 21230-3432 |
Date of Grant: 07/07/2013 Application Dated: 07/07/2013 |
| Technologies Solutions Group, LLC |
| 9693 Gerwig Lane |
| Suite J |
| Columbia, MD 21046 |
| Attention: Brian Bolton , Director of OEM Mfg. |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | SR7ST1000 |
| Name of Grantee: | Technologies Solutions Group, LLC |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | RFID module |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.75 - 927.25 | 0.977 |
| Output power listed is conducted. Modular Approval for mobile RF Exposure conditions, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 23cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. This module will only be incorporated into this grantees host. Class II PC to add new antennas. |
EAS Grant - Application JmRu/XOryEJpTNnTmgJ1MQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Technologies Solutions Group, LLC 9693 Gerwig Lane Suite J Columbia, MD 21046 United States |
Date of Grant: 07/07/2013 Application Dated: 07/07/2013 |
| Attention: Brian Bolton , Director of OEM Mfg. |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | SR7ST1000 |
| Name of Grantee: | Technologies Solutions Group, LLC |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | RFID module |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.75 - 927.25 | 0.977 |
| Output power listed is conducted. Modular Approval for mobile RF Exposure conditions, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 23cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. This module will only be incorporated into this grantees host. Class II PC to add new antennas. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
MET Laboratories, Inc. 914 W. Patapsco Avenue Baltimore, MD 21230-3432 |
Date of Grant: 05/29/2013 Application Dated: 05/29/2013 |
| Technologies Solutions Group, LLC |
| 9693 Gerwig Lane |
| Suite J |
| Columbia, MD 21046 |
| Attention: Brian Bolton , Director of OEM Mfg. |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | SR7ST1000 |
| Name of Grantee: | Technologies Solutions Group, LLC |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | RFID Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.75 - 927.25 | 0.977 |
| Output power listed is conducted. Modular Approval for mobile RF Exposure conditions, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 23cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only the antenna(s) listed in this filing can be used with this device. Use of additional antenna(s) are subject to the requirements of 15.204(c)(4). |
EAS Grant - Application csMkjpjF6yC+voP24BBqWg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Technologies Solutions Group, LLC 9693 Gerwig Lane Suite J Columbia, MD 21046 United States |
Date of Grant: 05/29/2013 Application Dated: 05/29/2013 |
| Attention: Brian Bolton , Director of OEM Mfg. |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | SR7ST1000 |
| Name of Grantee: | Technologies Solutions Group, LLC |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | RFID Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.75 - 927.25 | 0.977 |
| Output power listed is conducted. Modular Approval for mobile RF Exposure conditions, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 23cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only the antenna(s) listed in this filing can be used with this device. Use of additional antenna(s) are subject to the requirements of 15.204(c)(4). |
| Mail To: |