FCC ID SS3-GL300N1801
C1
by SZ DJI TECHNOLOGY CO., LTD
Grantee Code: SS3 Product Code: GL300N1801
Latest application date: 2018-03-12
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 5728.5-5846.5 MHz | Original Equipment | 2018-03-12 |
| 2403.5-2477.5 MHz | Original Equipment | 2018-03-12 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| User Manual | Users Manual | 2018-04-26 | PDF 475.7 KB |
| Users Manual | Users Manual | 2018-04-26 | PDF 475.7 KB |
| Int Photos | Internal Photos | 2018-04-26 | PDF 5.1 MB |
| Ext Photos | External Photos | 2018-04-26 | PDF 248.9 KB |
| FCC ID Label | ID Label/Location Info | 2018-03-12 | PDF 294.2 KB |
| SAR Setup Photos | Test Setup Photos | 2018-04-26 | PDF 281.1 KB |
| Setup Photos | Test Setup Photos | 2018-04-26 | PDF 98.7 KB |
| Setup Photos | Test Setup Photos | 2018-04-26 | PDF 257 KB |
| Setup Photos | Test Setup Photos | 2018-04-26 | PDF 90.4 KB |
| Test Report | Test Report | 2018-03-12 | PDF 382.4 KB |
| Test Report | Test Report | 2018-03-12 | PDF 1.5 MB |
| Test Report | Test Report | 2018-03-12 | PDF 1.3 MB |
| Confidentiality Letter | Cover Letter(s) | 2018-03-12 | PDF 25.2 KB |
| Frequency Band Declaration | Cover Letter(s) | 2018-03-12 | PDF 59.4 KB |
| POA | Cover Letter(s) | 2018-03-12 | PDF 17.7 KB |
| Product Similarity Declaration | Cover Letter(s) | 2018-03-12 | PDF 59.4 KB |
| SAR Report | RF Exposure Info | 2018-03-12 | PDF 718.3 KB |
| SAR Report Appendix 1 | RF Exposure Info | 2018-03-12 | PDF 1.6 MB |
| SAR Report Appendix 2 | RF Exposure Info | 2018-03-12 | PDF 1 MB |
| Block Diagram Metadata only | Block Diagram | PDF 181 KB | |
| Schematics Metadata only | Schematics | PDF 2.8 MB | |
| Schemtics Metadata only | Schematics | PDF 2.8 MB | |
| Operation Description Metadata only | Operational Description | PDF 187.3 KB | |
| Software Security Description Metadata only | Operational Description | PDF 230.1 KB |
Application Information
| Application ID | pSoyw1O2uY+4Qn1z/g1KPQ== |
|---|---|
| Final Action Date | 2018-03-12 |
| Application Purpose | Original Equipment |
| Applicant FRN | 0022596753 |
| Model | GL300N1801 |
| Equipment Class | JBP - Part 15 Class B Computing Device Peripheral |
| Device Description | C1 |
| Responsible Party | fajia wang, PM, certification@dji.com  , +8675586152250 |
| Test Firm | David Zhang, Bay Area Compliance Laboratories Corp.(Dongguan), qa.dg@baclcorp.com  , 0086 0769 86858888 |
| TCB Email | bacl.regulatory@baclcorp.com |
| TCB Scope | A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices |
| Short-Term Confidentiality | Yes |
| Short-Term Confidentiality Date | 04/26/2018 |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | Yes |
| Composite Part | Yes |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| pSoyw1O2uY+4Qn1z/g1KPQ== | 2018-03-12 | Original Equipment |
| I16Zt1CqwIZVLoQEe+nT4w== | 2018-03-12 | Original Equipment |
| 61qYLu+8dDMU0g3QpLtA9g== | 2018-03-12 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application pSoyw1O2uY+4Qn1z/g1KPQ==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Bay Area Compliance Laboratory Corp. 1274 Anvilwood Avenue Sunnyvale, CA 94089 |
Date of Grant: 03/12/2018 Application Dated: 03/12/2018 |
| SZ DJI TECHNOLOGY CO., LTD |
| 14th floor, West Wing, Skyworth Semiconductor |
| Design Building NO.18 Gaoxin South 4th Ave, |
| Nanshan District, Shenzhen, Guangdong, 518057 China |
| Attention: fajia wang , PM |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | SS3-GL300N1801 |
| Name of Grantee: | SZ DJI TECHNOLOGY CO., LTD |
| Equipment Class: | Part 15 Class B Computing Device Peripheral |
| Notes: | C1 |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15B | - |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application pSoyw1O2uY+4Qn1z/g1KPQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
SZ DJI TECHNOLOGY CO., LTD 14th floor, West Wing, Skyworth Semiconductor Design Building NO.18 Gaoxin South 4th Ave, Nanshan District, Shenzhen, Guangdong, 518057 China |
Date of Grant: 03/12/2018 Application Dated: 03/12/2018 |
| Attention: fajia wang , PM |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | SS3-GL300N1801 |
| Name of Grantee: | SZ DJI TECHNOLOGY CO., LTD |
| Equipment Class: | Part 15 Class B Computing Device Peripheral |
| Notes: | C1 |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15B | - |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Bay Area Compliance Laboratory Corp. 1274 Anvilwood Avenue Sunnyvale, CA 94089 |
Date of Grant: 03/12/2018 Application Dated: 03/12/2018 |
| SZ DJI TECHNOLOGY CO., LTD |
| 14th floor, West Wing, Skyworth Semiconductor |
| Design Building NO.18 Gaoxin South 4th Ave, |
| Nanshan District, Shenzhen, Guangdong, 518057 China |
| Attention: fajia wang , PM |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | SS3-GL300N1801 |
| Name of Grantee: | SZ DJI TECHNOLOGY CO., LTD |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | C1 |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC | 15E | 5728.5 - 5846.5 | 0.087 | ||
| 38 CC | 15E | 5730.5 - 5844.5 | 0.085 | ||
| 38 CC MO | 15E | 5745.0 - 5825.0 | 0.039 |
| Output power listed is conducted. SAR compliance for Body-worn and extremity (Hand) exposure conditions have been evaluated and documented in this filing. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance, and must provide a minimum separation distance of 10 mm between the device and the body. The highest reported SAR for Body-worn, extremity (Hand) and simultaneous transmission exposure conditions are 0.81 W/kg, 0.85 W/kg and 0.66 W/kg, respectively. This device supports 1.4 MHz, 10 MHz and 20 MHz bandwidth modes. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application I16Zt1CqwIZVLoQEe+nT4w==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
SZ DJI TECHNOLOGY CO., LTD 14th floor, West Wing, Skyworth Semiconductor Design Building NO.18 Gaoxin South 4th Ave, Nanshan District, Shenzhen, Guangdong, 518057 China |
Date of Grant: 03/12/2018 Application Dated: 03/12/2018 |
| Attention: fajia wang , PM |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | SS3-GL300N1801 |
| Name of Grantee: | SZ DJI TECHNOLOGY CO., LTD |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | C1 |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC | 15E | 5728.5 - 5846.5 | 0.087 | ||
| 38 CC | 15E | 5730.5 - 5844.5 | 0.085 | ||
| 38 CC MO | 15E | 5745.0 - 5825.0 | 0.039 |
| Output power listed is conducted. SAR compliance for Body-worn and extremity (Hand) exposure conditions have been evaluated and documented in this filing. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance, and must provide a minimum separation distance of 10 mm between the device and the body. The highest reported SAR for Body-worn, extremity (Hand) and simultaneous transmission exposure conditions are 0.81 W/kg, 0.85 W/kg and 0.66 W/kg, respectively. This device supports 1.4 MHz, 10 MHz and 20 MHz bandwidth modes. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Bay Area Compliance Laboratory Corp. 1274 Anvilwood Avenue Sunnyvale, CA 94089 |
Date of Grant: 03/12/2018 Application Dated: 03/12/2018 |
| SZ DJI TECHNOLOGY CO., LTD |
| 14th floor, West Wing, Skyworth Semiconductor |
| Design Building NO.18 Gaoxin South 4th Ave, |
| Nanshan District, Shenzhen, Guangdong, 518057 China |
| Attention: fajia wang , PM |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | SS3-GL300N1801 |
| Name of Grantee: | SZ DJI TECHNOLOGY CO., LTD |
| Equipment Class: | Digital Transmission System |
| Notes: | C1 |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2403.5 - 2477.5 | 0.06 | ||
| CC | 15C | 2405.5 - 2477.5 | 0.068 | ||
| CC MO | 15C | 2412.0 - 2462.0 | 0.046 |
| Output power listed is conducted. SAR compliance for Body-worn and extremity (Hand) exposure conditions have been evaluated and documented in this filing. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance, and must provide a minimum separation distance of 10 mm between the device and the body. The highest reported SAR for Body-worn, extremity (Hand) and simultaneous transmission exposure conditions are 0.33 W/kg, 0.94 W/kg and 0.66 W/kg, respectively. This device supports 1.4 MHz, 10 MHz and 20 MHz bandwidth modes. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application 61qYLu+8dDMU0g3QpLtA9g==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
SZ DJI TECHNOLOGY CO., LTD 14th floor, West Wing, Skyworth Semiconductor Design Building NO.18 Gaoxin South 4th Ave, Nanshan District, Shenzhen, Guangdong, 518057 China |
Date of Grant: 03/12/2018 Application Dated: 03/12/2018 |
| Attention: fajia wang , PM |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | SS3-GL300N1801 |
| Name of Grantee: | SZ DJI TECHNOLOGY CO., LTD |
| Equipment Class: | Digital Transmission System |
| Notes: | C1 |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2403.5 - 2477.5 | 0.06 | ||
| CC | 15C | 2405.5 - 2477.5 | 0.068 | ||
| CC MO | 15C | 2412.0 - 2462.0 | 0.046 |
| Output power listed is conducted. SAR compliance for Body-worn and extremity (Hand) exposure conditions have been evaluated and documented in this filing. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance, and must provide a minimum separation distance of 10 mm between the device and the body. The highest reported SAR for Body-worn, extremity (Hand) and simultaneous transmission exposure conditions are 0.33 W/kg, 0.94 W/kg and 0.66 W/kg, respectively. This device supports 1.4 MHz, 10 MHz and 20 MHz bandwidth modes. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: |