FCC ID SS3-GL900A1811
Cendence S
by SZ DJI TECHNOLOGY CO., LTD
Grantee Code: SS3 Product Code: GL900A1811
Latest application date: 2018-12-26
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2403.5-2477.5 MHz | Original Equipment | 2018-12-26 |
| 5728.5-5846.5 MHz | Original Equipment | 2018-12-26 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| User Manual | Users Manual | 2019-02-09 | PDF 1.8 MB |
| Int Photos | Internal Photos | 2019-02-09 | PDF 4.2 MB |
| Ext Photos | External Photos | 2019-02-09 | PDF 1.2 MB |
| FCC ID Label | ID Label/Location Info | 2018-12-26 | PDF 2.4 MB |
| SAR Setup Photos | Test Setup Photos | 2019-02-09 | PDF 542.6 KB |
| Setup Photos | Test Setup Photos | 2019-02-09 | PDF 195.4 KB |
| Setup Photos | Test Setup Photos | 2019-02-09 | PDF 190.1 KB |
| Setup Photos | Test Setup Photos | 2019-02-09 | PDF 601.3 KB |
| Test Report | Test Report | 2018-12-26 | PDF 1.1 MB |
| Test Report | Test Report | 2018-12-26 | PDF 555.2 KB |
| Test Report | Test Report | 2018-12-26 | PDF 908 KB |
| Confidentiality Letter | Cover Letter(s) | 2018-12-26 | PDF 25.2 KB |
| Frequency Band Declaration | Cover Letter(s) | 2018-12-26 | PDF 17 KB |
| POA | Cover Letter(s) | 2018-12-26 | PDF 17.8 KB |
| SAR Report | RF Exposure Info | 2018-12-26 | PDF 981.5 KB |
| SAR Report Appendix 1 | RF Exposure Info | 2018-12-26 | PDF 2.6 MB |
| SAR Report Appendix 2 | RF Exposure Info | 2018-12-26 | PDF 696.6 KB |
| Block Diagram Metadata only | Block Diagram | PDF 382 KB | |
| Schematics Metadata only | Schematics | PDF 4.2 MB | |
| Opeation Description Metadata only | Operational Description | PDF 490.1 KB | |
| Operation Description Metadata only | Operational Description | PDF 490.1 KB | |
| Soft Security Declaration Metadata only | Operational Description | PDF 280.6 KB |
Application Information
| Application ID | Pi8+OR6ZzLnDTSODGFpyWA== |
|---|---|
| Final Action Date | 2018-12-26 |
| Application Purpose | Original Equipment |
| Applicant FRN | 0022596753 |
| Model | GL900A1811 |
| Frequency Range | 2403.5-2477.5 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | Cendence S |
| Responsible Party | fajia wang, PM, certification@dji.com  , +8675586152250 |
| Test Firm | David Zhang, Bay Area Compliance Laboratories Corp.(Dongguan), qa.dg@baclcorp.com  , 0086 0769 86858888 |
| TCB Email | bacl.regulatory@baclcorp.com |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | Yes |
| Short-Term Confidentiality Date | 02/09/2019 |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | Yes |
| Composite Part | Yes |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Output power listed is conducted. SAR compliance for Body-worn and extremity (Hand) exposure conditions have been evaluated and documented in this filling. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance, and must provide a minimum separation distance of 10mm between the device and the body. The highest reported SAR for Body-worn, extremity (Hand) and simultaneous transmission exposure conditions are 0.66 W/kg, 1.10 W/kg, and 1.34 W/kg, respectively. This device supports 1.4 MHz, 10 MHz and 20 MHz bandwidth modes. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| Pi8+OR6ZzLnDTSODGFpyWA== | 2018-12-26 | Original Equipment |
| 4eiXud9VrW3ddocaVXbsew== | 2018-12-26 | Original Equipment |
| 3ZuwhTcTEEHePli2HslQCQ== | 2018-12-26 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application Pi8+OR6ZzLnDTSODGFpyWA==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Bay Area Compliance Laboratory Corp. 1274 Anvilwood Avenue Sunnyvale, CA 94089 |
Date of Grant: 12/26/2018 Application Dated: 12/26/2018 |
| SZ DJI TECHNOLOGY CO., LTD |
| 14th floor, West Wing, Skyworth Semiconductor |
| Design Building NO.18 Gaoxin South 4th Ave, |
| Nanshan District, Shenzhen, Guangdong, 518057 China |
| Attention: fajia wang , PM |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | SS3-GL900A1811 |
| Name of Grantee: | SZ DJI TECHNOLOGY CO., LTD |
| Equipment Class: | Digital Transmission System |
| Notes: | Cendence S |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2403.5 - 2477.5 | 0.448 | ||
| CC | 15C | 2405.5 - 2477.5 | 0.081 | ||
| CC | 15C | 2410.5 - 2472.5 | 0.077 |
| Output power listed is conducted. SAR compliance for Body-worn and extremity (Hand) exposure conditions have been evaluated and documented in this filling. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance, and must provide a minimum separation distance of 10mm between the device and the body. The highest reported SAR for Body-worn, extremity (Hand) and simultaneous transmission exposure conditions are 0.66 W/kg, 1.10 W/kg, and 1.34 W/kg, respectively. This device supports 1.4 MHz, 10 MHz and 20 MHz bandwidth modes. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application Pi8+OR6ZzLnDTSODGFpyWA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
SZ DJI TECHNOLOGY CO., LTD 14th floor, West Wing, Skyworth Semiconductor Design Building NO.18 Gaoxin South 4th Ave, Nanshan District, Shenzhen, Guangdong, 518057 China |
Date of Grant: 12/26/2018 Application Dated: 12/26/2018 |
| Attention: fajia wang , PM |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | SS3-GL900A1811 |
| Name of Grantee: | SZ DJI TECHNOLOGY CO., LTD |
| Equipment Class: | Digital Transmission System |
| Notes: | Cendence S |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2403.5 - 2477.5 | 0.448 | ||
| CC | 15C | 2405.5 - 2477.5 | 0.081 | ||
| CC | 15C | 2410.5 - 2472.5 | 0.077 |
| Output power listed is conducted. SAR compliance for Body-worn and extremity (Hand) exposure conditions have been evaluated and documented in this filling. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance, and must provide a minimum separation distance of 10mm between the device and the body. The highest reported SAR for Body-worn, extremity (Hand) and simultaneous transmission exposure conditions are 0.66 W/kg, 1.10 W/kg, and 1.34 W/kg, respectively. This device supports 1.4 MHz, 10 MHz and 20 MHz bandwidth modes. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Bay Area Compliance Laboratory Corp. 1274 Anvilwood Avenue Sunnyvale, CA 94089 |
Date of Grant: 12/26/2018 Application Dated: 12/26/2018 |
| SZ DJI TECHNOLOGY CO., LTD |
| 14th floor, West Wing, Skyworth Semiconductor |
| Design Building NO.18 Gaoxin South 4th Ave, |
| Nanshan District, Shenzhen, Guangdong, 518057 China |
| Attention: fajia wang , PM |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | SS3-GL900A1811 |
| Name of Grantee: | SZ DJI TECHNOLOGY CO., LTD |
| Equipment Class: | Part 15 Class B Digital Device |
| Notes: | Cendence S |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15B | - |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application 4eiXud9VrW3ddocaVXbsew==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
SZ DJI TECHNOLOGY CO., LTD 14th floor, West Wing, Skyworth Semiconductor Design Building NO.18 Gaoxin South 4th Ave, Nanshan District, Shenzhen, Guangdong, 518057 China |
Date of Grant: 12/26/2018 Application Dated: 12/26/2018 |
| Attention: fajia wang , PM |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | SS3-GL900A1811 |
| Name of Grantee: | SZ DJI TECHNOLOGY CO., LTD |
| Equipment Class: | Part 15 Class B Digital Device |
| Notes: | Cendence S |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15B | - |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Bay Area Compliance Laboratory Corp. 1274 Anvilwood Avenue Sunnyvale, CA 94089 |
Date of Grant: 12/26/2018 Application Dated: 12/26/2018 |
| SZ DJI TECHNOLOGY CO., LTD |
| 14th floor, West Wing, Skyworth Semiconductor |
| Design Building NO.18 Gaoxin South 4th Ave, |
| Nanshan District, Shenzhen, Guangdong, 518057 China |
| Attention: fajia wang , PM |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | SS3-GL900A1811 |
| Name of Grantee: | SZ DJI TECHNOLOGY CO., LTD |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Cendence S |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5728.5 - 5846.5 | 0.076 | ||
| CC | 15E | 5730.5 - 5844.5 | 0.009 | ||
| CC | 15E | 5735.5 - 5839.5 | 0.008 |
| Output power listed is conducted. SAR compliance for Body-worn and extremity (Hand) exposure conditions have been evaluated and documented in this filling. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance, and must provide a minimum separation distance of 10mm between the device and the body. The highest reported SAR for Body-worn, extremity (Hand) and simultaneous transmission exposure conditions are 0.56 W/kg, 0.61 W/kg, and 1.34 W/kg, respectively. This device supports 1.4 MHz, 10 MHz and 20 MHz bandwidth modes. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application 3ZuwhTcTEEHePli2HslQCQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
SZ DJI TECHNOLOGY CO., LTD 14th floor, West Wing, Skyworth Semiconductor Design Building NO.18 Gaoxin South 4th Ave, Nanshan District, Shenzhen, Guangdong, 518057 China |
Date of Grant: 12/26/2018 Application Dated: 12/26/2018 |
| Attention: fajia wang , PM |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | SS3-GL900A1811 |
| Name of Grantee: | SZ DJI TECHNOLOGY CO., LTD |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Cendence S |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5728.5 - 5846.5 | 0.076 | ||
| CC | 15E | 5730.5 - 5844.5 | 0.009 | ||
| CC | 15E | 5735.5 - 5839.5 | 0.008 |
| Output power listed is conducted. SAR compliance for Body-worn and extremity (Hand) exposure conditions have been evaluated and documented in this filling. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance, and must provide a minimum separation distance of 10mm between the device and the body. The highest reported SAR for Body-worn, extremity (Hand) and simultaneous transmission exposure conditions are 0.56 W/kg, 0.61 W/kg, and 1.34 W/kg, respectively. This device supports 1.4 MHz, 10 MHz and 20 MHz bandwidth modes. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: |