FCC ID SS3-R400BS1806

D-RTK 2 High-Precision GNSS Mobile Station

by SZ DJI TECHNOLOGY CO., LTD

Grantee Code: SS3   Product Code: R400BS1806
Latest application date: 2018-07-25

FCC ID Device Details

FCC IDSS3-R400BS1806
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeSS3
Product CodeR400BS1806
Applicant BusinessSZ DJI TECHNOLOGY CO., LTD 🇨🇳
Related Domains dji.com
Equipment ClassD-RTK 2 High-Precision GNSS Mobile Station
Test FirmBay Area Compliance Laboratories Corp.(Dongguan)

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2403.5-2477.5 MHzOriginal Equipment2018-07-25
5728.5-5846.5 MHzOriginal Equipment2018-07-25

Exhibits

DocumentTypeAvailableFile
User ManualUsers Manual2018-09-08PDF 374.6 KB
Int PhotosInternal Photos2018-09-08PDF 1.7 MB
Ext PhotosExternal Photos2018-09-08PDF 485.1 KB
FCC ID LabelID Label/Location Info2018-07-25PDF 123.3 KB
Setup PhotosTest Setup Photos2018-09-08PDF 167.3 KB
Setup PhotosTest Setup Photos2018-09-08PDF 171.9 KB
Setup PhotosTest Setup Photos2018-09-08PDF 175 KB
Test ReportTest Report2018-07-25PDF 472.2 KB
Test ReportTest Report2018-07-25PDF 1.8 MB
Test ReportTest Report2018-07-25PDF 1.5 MB
Confidentiality LetterCover Letter(s)2018-07-25PDF 25.1 KB
Frequency Band DeclarationCover Letter(s)2018-07-25PDF 17.2 KB
POACover Letter(s)2018-07-25PDF 17.8 KB
RF ExposureRF Exposure Info2018-07-25PDF 26.5 KB
RF ExposureRF Exposure Info2018-07-25PDF 26.6 KB
Block Diagram Metadata onlyBlock DiagramPDF 489.9 KB
Schematics Metadata onlySchematicsPDF 683.4 KB
Operation Description Metadata onlyOperational DescriptionPDF 255.4 KB
Software Security Declaration Metadata onlyOperational DescriptionPDF 239.6 KB

Application Information

Application IDh/j+LPRRSoxsb+4pDaqQGw==
Final Action Date2018-07-25
Application PurposeOriginal Equipment
Applicant FRN0022596753
ModelR400BS1806
Frequency Range2403.5-2477.5 MHz
Equipment ClassDTS - Digital Transmission System
Device DescriptionD-RTK 2 High-Precision GNSS Mobile Station
Responsible Partyfajia wang, PM, certification@dji.com , +8675586152250
Test FirmDavid Zhang, Bay Area Compliance Laboratories Corp.(Dongguan), qa.dg@baclcorp.com , 0086 0769 86858888
TCB Emailbacl.regulatory@baclcorp.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityYes
Short-Term Confidentiality Date09/08/2018
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartYes
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsOutput power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device supports 1.4 MHz, 10 MHz and 20 MHz bandwidth modes.

Applications

Application IDDatePurpose
h/j+LPRRSoxsb+4pDaqQGw==2018-07-25Original Equipment
ELW530ZIQzPPIxT3ogKTwA==2018-07-25Original Equipment
BDknrNKjUpYEU5I6u684iw==2018-07-25Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
15BCC
2403.5-2477.5 MHz0.50115CCC
2405.5-2477.5 MHz0.49215CCC
2412-2462 MHz0.49715CCC, MO
5728.5-5846.5 MHz0.14115ECC
5730.5-5844.5 MHz0.13915ECC
5745-5825 MHz0.05515ECC, MO

Grants

TCB Grant - Application h/j+LPRRSoxsb+4pDaqQGw==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Bay Area Compliance Laboratory Corp.
1274 Anvilwood Avenue
Sunnyvale, CA 94089
Date of Grant: 07/25/2018

Application Dated: 07/25/2018
SZ DJI TECHNOLOGY CO., LTD
14th floor, West Wing, Skyworth Semiconductor
Design Building NO.18 Gaoxin South 4th Ave,
Nanshan District, Shenzhen, Guangdong, 518057
China
 
Attention: fajia wang , PM

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  SS3-R400BS1806
Name of Grantee:  SZ DJI TECHNOLOGY CO., LTD
Equipment Class: Digital Transmission System
Notes: D-RTK 2 High-Precision GNSS Mobile Station
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2403.5  -  2477.5 0.501  
CC 15C 2405.5  -  2477.5 0.492  
CC MO 15C 2412.0  -  2462.0 0.497  

Output power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device supports 1.4 MHz, 10 MHz and 20 MHz bandwidth modes.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application h/j+LPRRSoxsb+4pDaqQGw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

SZ DJI TECHNOLOGY CO., LTD
14th floor, West Wing, Skyworth Semiconductor Design Building NO.18 Gaoxin South 4th Ave,
Nanshan District, Shenzhen, Guangdong, 518057
China
  Date of Grant: 07/25/2018

Application Dated: 07/25/2018
 
Attention: fajia wang , PM

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  SS3-R400BS1806
Name of Grantee:  SZ DJI TECHNOLOGY CO., LTD
Equipment Class: Digital Transmission System
Notes: D-RTK 2 High-Precision GNSS Mobile Station
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2403.5  -  2477.5 0.501  
CC 15C 2405.5  -  2477.5 0.492  
CC MO 15C 2412.0  -  2462.0 0.497  

Output power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device supports 1.4 MHz, 10 MHz and 20 MHz bandwidth modes.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application ELW530ZIQzPPIxT3ogKTwA==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Bay Area Compliance Laboratory Corp.
1274 Anvilwood Avenue
Sunnyvale, CA 94089
Date of Grant: 07/25/2018

Application Dated: 07/25/2018
SZ DJI TECHNOLOGY CO., LTD
14th floor, West Wing, Skyworth Semiconductor
Design Building NO.18 Gaoxin South 4th Ave,
Nanshan District, Shenzhen, Guangdong, 518057
China
 
Attention: fajia wang , PM

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  SS3-R400BS1806
Name of Grantee:  SZ DJI TECHNOLOGY CO., LTD
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: D-RTK 2 High-Precision GNSS Mobile Station
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5728.5  -  5846.5 0.141  
CC 15E 5730.5  -  5844.5 0.139  
CC MO 15E 5745.0  -  5825.0 0.055  

Output power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device supports 1.4 MHz, 10 MHz and 20 MHz bandwidth modes.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application ELW530ZIQzPPIxT3ogKTwA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

SZ DJI TECHNOLOGY CO., LTD
14th floor, West Wing, Skyworth Semiconductor Design Building NO.18 Gaoxin South 4th Ave,
Nanshan District, Shenzhen, Guangdong, 518057
China
  Date of Grant: 07/25/2018

Application Dated: 07/25/2018
 
Attention: fajia wang , PM

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  SS3-R400BS1806
Name of Grantee:  SZ DJI TECHNOLOGY CO., LTD
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: D-RTK 2 High-Precision GNSS Mobile Station
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5728.5  -  5846.5 0.141  
CC 15E 5730.5  -  5844.5 0.139  
CC MO 15E 5745.0  -  5825.0 0.055  

Output power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device supports 1.4 MHz, 10 MHz and 20 MHz bandwidth modes.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application BDknrNKjUpYEU5I6u684iw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Bay Area Compliance Laboratory Corp.
1274 Anvilwood Avenue
Sunnyvale, CA 94089
Date of Grant: 07/25/2018

Application Dated: 07/25/2018
SZ DJI TECHNOLOGY CO., LTD
14th floor, West Wing, Skyworth Semiconductor
Design Building NO.18 Gaoxin South 4th Ave,
Nanshan District, Shenzhen, Guangdong, 518057
China
 
Attention: fajia wang , PM

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  SS3-R400BS1806
Name of Grantee:  SZ DJI TECHNOLOGY CO., LTD
Equipment Class: Part 15 Class B Digital Device
Notes: D-RTK 2 High-Precision GNSS Mobile Station
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15B  - 


CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application BDknrNKjUpYEU5I6u684iw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

SZ DJI TECHNOLOGY CO., LTD
14th floor, West Wing, Skyworth Semiconductor Design Building NO.18 Gaoxin South 4th Ave,
Nanshan District, Shenzhen, Guangdong, 518057
China
  Date of Grant: 07/25/2018

Application Dated: 07/25/2018
 
Attention: fajia wang , PM

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  SS3-R400BS1806
Name of Grantee:  SZ DJI TECHNOLOGY CO., LTD
Equipment Class: Part 15 Class B Digital Device
Notes: D-RTK 2 High-Precision GNSS Mobile Station
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15B  - 


CC: This device is certified pursuant to two different Part 15 rules sections.

Mail To: