FCC ID SS3-U11X1710

MAVIC AIR

by SZ DJI TECHNOLOGY CO., LTD

Grantee Code: SS3   Product Code: U11X1710
Latest application date: 2018-01-23

FCC ID Device Details

FCC IDSS3-U11X1710
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeSS3
Product CodeU11X1710
Applicant BusinessSZ DJI TECHNOLOGY CO., LTD 🇨🇳
Related Domains dji.com
Equipment ClassMAVIC AIR
Test FirmBay Area Compliance Laboratories Corp.(Dongguan)

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2412-2462 MHzOriginal Equipment2018-01-23
5745-5825 MHzOriginal Equipment2018-01-23

Exhibits

DocumentTypeAvailableFile
Users ManualUsers Manual2018-03-09PDF 1.2 MB
Int PhotosInternal Photos2018-03-09PDF 1.1 MB
Ext PhotosExternal Photos2018-03-09PDF 413 KB
FCC ID LabelID Label/Location Info2018-01-23PDF 289.6 KB
Setup PhotosTest Setup Photos2018-03-09PDF 78.9 KB
Setup PhotosTest Setup Photos2018-03-09PDF 91.5 KB
Setup PhotosTest Setup Photos2018-03-09PDF 254 KB
Test ReportTest Report2018-01-23PDF 1.8 MB
Test ReportTest Report2018-01-23PDF 340.3 KB
Test ReportTest Report2018-01-23PDF 1.5 MB
Confidentiality LetterCover Letter(s)2018-01-23PDF 25.2 KB
Frequency Band DeclarationCover Letter(s)2018-01-23PDF 130.9 KB
Frequency Band StatementCover Letter(s)2018-01-23PDF 130.9 KB
POACover Letter(s)2018-01-23PDF 17.7 KB
RF ExposureRF Exposure Info2018-01-23PDF 114.3 KB
RF ExposureRF Exposure Info2018-01-23PDF 102.1 KB
Block Diagram Metadata onlyBlock DiagramPDF 109.1 KB
Schematics Metadata onlySchematicsPDF 5.4 MB
Schemtics Metadata onlySchematicsPDF 5.4 MB
Operation Description Metadata onlyOperational DescriptionPDF 127.3 KB
Software Security Description Metadata onlyOperational DescriptionPDF 232.8 KB

Application Information

Application IDr1Mkir9YA164jIIESWaJ2g==
Final Action Date2018-01-23
Application PurposeOriginal Equipment
Applicant FRN0022596753
ModelU11X1710
Frequency Range2412-2462 MHz
Equipment ClassDTS - Digital Transmission System
Device DescriptionMAVIC AIR
Responsible Partyfajia wang, PM, certification@dji.com , +8675586152250
Test FirmDavid Zhang, Bay Area Compliance Laboratories Corp.(Dongguan), qa.dg@baclcorp.com , 0086 0769 86858888
TCB Emailbacl.regulatory@baclcorp.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityYes
Short-Term Confidentiality Date03/09/2018
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartYes
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsOutput power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device supports 5 MHz, 10 MHz and 20 MHz bandwidth modes.

Applications

Application IDDatePurpose
r1Mkir9YA164jIIESWaJ2g==2018-01-23Original Equipment
SgKdEZ4QYGSLWt6KOuII8w==2018-01-23Original Equipment
2Orpwl8D4EDUr8KOAOqAFg==2018-01-23Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
15BCC
2412-2462 MHz0.206000015CCC, MO
5745-5825 MHz0.514000015E38, CC, MO

Grants

TCB Grant - Application SgKdEZ4QYGSLWt6KOuII8w==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Bay Area Compliance Laboratory Corp.
1274 Anvilwood Avenue
Sunnyvale, CA 94089
Date of Grant: 01/23/2018

Application Dated: 01/19/2018
SZ DJI TECHNOLOGY CO., LTD
14th floor, West Wing, Skyworth Semiconductor
Design Building NO.18 Gaoxin South 4th Ave,
Nanshan District, Shenzhen, Guangdong, 518057
China
 
Attention: fajia wang , PM

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  SS3-U11X1710
Name of Grantee:  SZ DJI TECHNOLOGY CO., LTD
Equipment Class: Part 15 Class B Computing Device Peripheral
Notes: MAVIC AIR
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15B  - 


CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application SgKdEZ4QYGSLWt6KOuII8w==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

SZ DJI TECHNOLOGY CO., LTD
14th floor, West Wing, Skyworth Semiconductor Design Building NO.18 Gaoxin South 4th Ave,
Nanshan District, Shenzhen, Guangdong, 518057
China
  Date of Grant: 01/23/2018

Application Dated: 01/19/2018
 
Attention: fajia wang , PM

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  SS3-U11X1710
Name of Grantee:  SZ DJI TECHNOLOGY CO., LTD
Equipment Class: Part 15 Class B Computing Device Peripheral
Notes: MAVIC AIR
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15B  - 


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application r1Mkir9YA164jIIESWaJ2g==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Bay Area Compliance Laboratory Corp.
1274 Anvilwood Avenue
Sunnyvale, CA 94089
Date of Grant: 01/23/2018

Application Dated: 01/19/2018
SZ DJI TECHNOLOGY CO., LTD
14th floor, West Wing, Skyworth Semiconductor
Design Building NO.18 Gaoxin South 4th Ave,
Nanshan District, Shenzhen, Guangdong, 518057
China
 
Attention: fajia wang , PM

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  SS3-U11X1710
Name of Grantee:  SZ DJI TECHNOLOGY CO., LTD
Equipment Class: Digital Transmission System
Notes: MAVIC AIR
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.206  

Output power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device supports 5 MHz, 10 MHz and 20 MHz bandwidth modes.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application r1Mkir9YA164jIIESWaJ2g==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

SZ DJI TECHNOLOGY CO., LTD
14th floor, West Wing, Skyworth Semiconductor Design Building NO.18 Gaoxin South 4th Ave,
Nanshan District, Shenzhen, Guangdong, 518057
China
  Date of Grant: 01/23/2018

Application Dated: 01/19/2018
 
Attention: fajia wang , PM

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  SS3-U11X1710
Name of Grantee:  SZ DJI TECHNOLOGY CO., LTD
Equipment Class: Digital Transmission System
Notes: MAVIC AIR
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.206  

Output power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device supports 5 MHz, 10 MHz and 20 MHz bandwidth modes.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application 2Orpwl8D4EDUr8KOAOqAFg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Bay Area Compliance Laboratory Corp.
1274 Anvilwood Avenue
Sunnyvale, CA 94089
Date of Grant: 01/23/2018

Application Dated: 01/19/2018
SZ DJI TECHNOLOGY CO., LTD
14th floor, West Wing, Skyworth Semiconductor
Design Building NO.18 Gaoxin South 4th Ave,
Nanshan District, Shenzhen, Guangdong, 518057
China
 
Attention: fajia wang , PM

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  SS3-U11X1710
Name of Grantee:  SZ DJI TECHNOLOGY CO., LTD
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: MAVIC AIR
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC MO 15E 5745.0  -  5825.0 0.514  

Output power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device supports 5 MHz, 10 MHz, 20 MHz, and 40 MHz bandwidth modes.

38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application 2Orpwl8D4EDUr8KOAOqAFg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

SZ DJI TECHNOLOGY CO., LTD
14th floor, West Wing, Skyworth Semiconductor Design Building NO.18 Gaoxin South 4th Ave,
Nanshan District, Shenzhen, Guangdong, 518057
China
  Date of Grant: 01/23/2018

Application Dated: 01/19/2018
 
Attention: fajia wang , PM

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  SS3-U11X1710
Name of Grantee:  SZ DJI TECHNOLOGY CO., LTD
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: MAVIC AIR
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC MO 15E 5745.0  -  5825.0 0.514  

Output power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device supports 5 MHz, 10 MHz, 20 MHz, and 40 MHz bandwidth modes.


38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

Mail To: