FCC ID STJ-SDMAN
SDIO Wireless Module
by ICU Medical, Inc.
Grantee Code: STJ Product Code: SDMAN
Latest application date: 2016-05-12
Device Images
FCC ID Device Details
| FCC ID | STJ-SDMAN |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | STJ |
| Product Code | SDMAN |
| Applicant Business | ICU Medical, Inc. 🇺🇸 |
| Related Domains |  icumed.com |
| Equipment Class | SDIO Wireless Module |
| Test Firm | Bureau Veritas Consumer Products Services, Inc. |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2016-05-12 |
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2016-05-12 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2016-05-10 |
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2016-05-10 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2014-06-13 |
| 5180-5320 MHz | Class II permissive change or modification of presently authorized equipment | 2014-06-13 |
| 5180-5320 MHz | Change in identification of presently authorized equipment. Original FCC ID: N6C-SDMAN Grant Date: 05/16/2013 | 2014-06-06 |
| 2402-2480 MHz | Change in identification of presently authorized equipment. Original FCC ID: N6C-SDMAN Grant Date: 08/20/2012 | 2014-06-06 |
| 2402-2480 MHz | Change in identification of presently authorized equipment. Original FCC ID: N6C-SDMAN Grant Date: 08/20/2012 | 2014-06-06 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Installation Manaul | Users Manual | 2014-06-06 | PDF 222 KB |
| Installation Manual | Users Manual | 2014-06-06 | PDF 222 KB |
| RF Module Photos | Internal Photos | 2016-05-12 | PDF 140.8 KB |
| Host Unit Photos | External Photos | 2016-05-12 | PDF 281.4 KB |
| EUT Photos | External Photos | 2016-05-10 | PDF 140.8 KB |
| Host Unit Photo | External Photos | 2014-06-13 | PDF 281.4 KB |
| External Photos | External Photos | 2014-06-06 | PDF 245.9 KB |
| Label & Location | ID Label/Location Info | 2014-06-06 | PDF 610.6 KB |
| Test Setup Photos Metadata only | Test Setup Photos | 2016-05-12 | PDF 237.8 KB |
| Test Setup Photos | Test Setup Photos | 2014-06-13 | PDF 245.9 KB |
| Test Report Metadata only | Test Report | 2016-05-12 | PDF 4.5 MB |
| Test Report | Test Report | 2016-05-10 | PDF 2.9 MB |
| Test Report | Test Report | 2014-06-13 | PDF 1.4 MB |
| Test Report | Test Report | 2014-06-13 | PDF 1.5 MB |
| Attestation Letter Metadata only | Cover Letter(s) | 2016-05-12 | PDF 126.3 KB |
| Attestation Letter Metadata only | Cover Letter(s) | 2016-05-10 | PDF 109.5 KB |
| Permissive Change Letter | Cover Letter(s) | 2016-05-12 | PDF 43.6 KB |
| Product Certification Rep Auth Letter | Cover Letter(s) | 2016-05-12 | PDF 113.6 KB |
| Permissive Change Request Letter | Cover Letter(s) | 2016-05-10 | PDF 111.7 KB |
| Authorization Letter | Cover Letter(s) | 2014-06-13 | PDF 134.3 KB |
| Confidentiality Letter | Cover Letter(s) | 2014-06-13 | PDF 86.2 KB |
| Permissive Change Request Letter | Cover Letter(s) | 2014-06-13 | PDF 110.3 KB |
| Auathorization Letter | Cover Letter(s) | 2014-06-06 | PDF 152.2 KB |
| Authorization Letter | Cover Letter(s) | 2014-06-06 | PDF 152.2 KB |
| Authorization Letter from Original Applicant | Cover Letter(s) | 2014-06-06 | PDF 443.6 KB |
| Authorization Letter of Original Applicant | Cover Letter(s) | 2014-06-06 | PDF 443.6 KB |
| Change of ID Request Letter | Cover Letter(s) | 2014-06-06 | PDF 113 KB |
| MPE Calculation | RF Exposure Info | 2016-05-10 | PDF 93.5 KB |
| MPE Calculation Report Metadata only | RF Exposure Info | 2016-05-10 | PDF 93.5 KB |
| SAR Report | RF Exposure Info | 2014-06-13 | PDF 4.3 MB |
| Software Security Declaration Metadata only | Operational Description | PDF 360.5 KB | |
| Tune-up Procedure Metadata only | Parts List/Tune Up Info | PDF 213.9 KB |
Application Information
| Application ID | jnejdHzGcyxc/BvkNILKZw== |
|---|---|
| Final Action Date | 2016-05-12 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0012322509 |
| Model | SDMAN |
| Frequency Range | 2402-2480 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | SDIO Wireless Module |
| Responsible Party | Chaitanya M Srinivasamurthy, Section Manager, chaitanya.srinivasamurthy@icumed.com , 2247062518 |
| Test Firm | Sarb Shelopal, Bureau Veritas Consumer Products Services, Inc., Sarbjit.Shelopal@bureauveritas.com  , +1 925 963 4420 |
| TCB Email | tcb@siemic.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | C2PC to update to UNII new rule. The highest reported SAR is 0.51 W/KG Single Modular Approval for mobile host platforms. Output power listed is Conducted. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| jnejdHzGcyxc/BvkNILKZw== | 2016-05-12 | Class II permissive change or modification of presently authorized equipment |
| HCD9zuR/Bk6nBpPwIS3OBQ== | 2016-05-12 | Class II permissive change or modification of presently authorized equipment |
| jAJFZU20H+zgEceIdti1Ig== | 2016-05-10 | Class II permissive change or modification of presently authorized equipment |
| Y8W5RgP1maa73pt9MYSEVQ== | 2016-05-10 | Class II permissive change or modification of presently authorized equipment |
| JJAJo9VCXaX0xJrhDTTLsw== | 2014-06-13 | Class II permissive change or modification of presently authorized equipment |
| +17Xk/3BVOgyXkV0Fh0rxQ== | 2014-06-13 | Class II permissive change or modification of presently authorized equipment |
| neMNMJrA/0g48jeGR645ew== | 2014-06-06 | Change in identification of presently authorized equipment. Original FCC ID: N6C-SDMAN Grant Date: 05/16/2013 |
| mcVRxHVmGhf3MmsCJV8scQ== | 2014-06-06 | Change in identification of presently authorized equipment. Original FCC ID: N6C-SDMAN Grant Date: 08/20/2012 |
| 4ur5hyyPkBwUoGpPDrCSlw== | 2014-06-06 | Change in identification of presently authorized equipment. Original FCC ID: N6C-SDMAN Grant Date: 08/20/2012 |
Equipment Authorization
| Frequency | Output | Rules | Grant Notes |
|---|---|---|---|
| 2402-2480 MHz | 0.0086 | 15C | CC |
| 2402-2480 MHz | 0.0139000 | 15C | CC |
| 2412-2462 MHz | 0.1723 | 15C | CC |
| 5180-5320 MHz | 0.0247 | 15E | CC |
| 5180-5240 MHz | 0.0247 | 15E | 38, CC |
| 5260-5320 MHz | 0.0247 | 15E | 38, CC, ND |
| 5500-5580 MHz | 0.018 | 15E | CC, ND |
| 5500-5580 MHz | 0.018 | 15E | 38, CC, ND |
| 5660-5700 MHz | 0.02 | 15E | CC, ND |
| 5660-5700 MHz | 0.02 | 15E | 38, CC, ND |
| 5745-5825 MHz | 0.198 | 15C | CC |
| 5745-5825 MHz | 0.198 | 15E | 38, CC |
Grants
TCB Grant - Application Y8W5RgP1maa73pt9MYSEVQ==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Bureau Veritas Consumer Products Services, Inc. 775 Montague Expressway Milpitas, CA 95035 |
Date of Grant: 05/10/2016 Application Dated: 05/10/2016 |
| ICU Medical, Inc. |
| 951 Calle Amanecer |
| San Clemente, CA 92673 |
| Attention: Chaitanya Srinivasamurthy , Section Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | STJ-SDMAN |
| Name of Grantee: | ICU Medical, Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | SDIO Wireless Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC | 15E | 5180.0 - 5240.0 | 0.0247 | ||
| 38 CC ND | 15E | 5260.0 - 5320.0 | 0.0247 | ||
| 38 CC ND | 15E | 5500.0 - 5580.0 | 0.018 | ||
| 38 CC ND | 15E | 5660.0 - 5700.0 | 0.02 | ||
| 38 CC | 15E | 5745.0 - 5825.0 | 0.198 |
| Single Modular Approval for mobile platforms. Output power listed is Conducted. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. This device complies with the Dynamic Frequency Selection (DFS) requirements of Report and Order FCC 03-287 as a Client only without Radar Detection. This device is capable of 20/40 bandwidths. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application Y8W5RgP1maa73pt9MYSEVQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
ICU Medical, Inc. 951 Calle Amanecer San Clemente, CA 92673 United States |
Date of Grant: 05/10/2016 Application Dated: 05/10/2016 |
| Attention: Chaitanya Srinivasamurthy , Section Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | STJ-SDMAN |
| Name of Grantee: | ICU Medical, Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | SDIO Wireless Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC | 15E | 5180.0 - 5240.0 | 0.0247 | ||
| 38 CC ND | 15E | 5260.0 - 5320.0 | 0.0247 | ||
| 38 CC ND | 15E | 5500.0 - 5580.0 | 0.018 | ||
| 38 CC ND | 15E | 5660.0 - 5700.0 | 0.02 | ||
| 38 CC | 15E | 5745.0 - 5825.0 | 0.198 |
| Single Modular Approval for mobile platforms. Output power listed is Conducted. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. This device complies with the Dynamic Frequency Selection (DFS) requirements of Report and Order FCC 03-287 as a Client only without Radar Detection. This device is capable of 20/40 bandwidths. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Bureau Veritas Consumer Products Services, Inc. 775 Montague Expressway Milpitas, CA 95035 |
Date of Grant: 06/06/2014 Application Dated: 06/06/2014 |
| ICU Medical, Inc. |
| 951 Calle Amanecer |
| San Clemente, CA 92673 |
| Attention: Chaitanya Srinivasamurthy , Section Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | STJ-SDMAN |
| Name of Grantee: | ICU Medical, Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | SDIO Wireless Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5320.0 | 0.0247 | ||
| CC ND | 15E | 5500.0 - 5580.0 | 0.018 | ||
| CC ND | 15E | 5660.0 - 5700.0 | 0.02 |
| Single Modular Approval for mobile platforms. Output power listed is Conducted. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. This device complies with the Dynamic Frequency Selection (DFS) requirements of Report and Order FCC 03-287 as a Client only without Radar Detection. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application neMNMJrA/0g48jeGR645ew==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
ICU Medical, Inc. 951 Calle Amanecer San Clemente, CA 92673 United States |
Date of Grant: 06/06/2014 Application Dated: 06/06/2014 |
| Attention: Chaitanya Srinivasamurthy , Section Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | STJ-SDMAN |
| Name of Grantee: | ICU Medical, Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | SDIO Wireless Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5320.0 | 0.0247 | ||
| CC ND | 15E | 5500.0 - 5580.0 | 0.018 | ||
| CC ND | 15E | 5660.0 - 5700.0 | 0.02 |
| Single Modular Approval for mobile platforms. Output power listed is Conducted. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. This device complies with the Dynamic Frequency Selection (DFS) requirements of Report and Order FCC 03-287 as a Client only without Radar Detection. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Bureau Veritas Consumer Products Services, Inc. 775 Montague Expressway Milpitas, CA 95035 |
Date of Grant: 06/06/2014 Application Dated: 06/06/2014 |
| ICU Medical, Inc. |
| 951 Calle Amanecer |
| San Clemente, CA 92673 |
| Attention: Chaitanya Srinivasamurthy , Section Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | STJ-SDMAN |
| Name of Grantee: | ICU Medical, Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | SDIO Wireless Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0139 |
| Single Modular Approval for mobile platforms. Output power listed is Conducted. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application mcVRxHVmGhf3MmsCJV8scQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
ICU Medical, Inc. 951 Calle Amanecer San Clemente, CA 92673 United States |
Date of Grant: 06/06/2014 Application Dated: 06/06/2014 |
| Attention: Chaitanya Srinivasamurthy , Section Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | STJ-SDMAN |
| Name of Grantee: | ICU Medical, Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | SDIO Wireless Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0139 |
| Single Modular Approval for mobile platforms. Output power listed is Conducted. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Bureau Veritas Consumer Products Services, Inc. 775 Montague Expressway Milpitas, CA 95035 |
Date of Grant: 05/12/2016 Application Dated: 05/12/2016 |
| ICU Medical, Inc. |
| 951 Calle Amanecer |
| San Clemente, CA 92673 |
| Attention: Chaitanya Srinivasamurthy , Section Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | STJ-SDMAN |
| Name of Grantee: | ICU Medical, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | SDIO Wireless Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0086 | ||
| CC | 15C | 2412.0 - 2462.0 | 0.1723 |
| C2PC to update to UNII new rule. The highest reported SAR is 0.51 W/KG Single Modular Approval for mobile host platforms. Output power listed is Conducted. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application jnejdHzGcyxc/BvkNILKZw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
ICU Medical, Inc. 951 Calle Amanecer San Clemente, CA 92673 United States |
Date of Grant: 05/12/2016 Application Dated: 05/12/2016 |
| Attention: Chaitanya Srinivasamurthy , Section Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | STJ-SDMAN |
| Name of Grantee: | ICU Medical, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | SDIO Wireless Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0086 | ||
| CC | 15C | 2412.0 - 2462.0 | 0.1723 |
| C2PC to update to UNII new rule. The highest reported SAR is 0.51 W/KG Single Modular Approval for mobile host platforms. Output power listed is Conducted. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Bureau Veritas Consumer Products Services, Inc. 775 Montague Expressway Milpitas, CA 95035 |
Date of Grant: 06/13/2014 Application Dated: 06/13/2014 |
| ICU Medical, Inc. |
| 951 Calle Amanecer |
| San Clemente, CA 92673 |
| Attention: Chaitanya Srinivasamurthy , Section Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | STJ-SDMAN |
| Name of Grantee: | ICU Medical, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | SDIO Wireless Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0086 | ||
| CC | 15C | 2412.0 - 2462.0 | 0.1723 | ||
| CC | 15C | 5745.0 - 5825.0 | 0.198 |
| C2PC for New Host with new antennas. The highest reported SAR is 0.51 W/KG Single Modular Approval for mobile platforms. Output power listed is Conducted. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application JJAJo9VCXaX0xJrhDTTLsw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
ICU Medical, Inc. 951 Calle Amanecer San Clemente, CA 92673 United States |
Date of Grant: 06/13/2014 Application Dated: 06/13/2014 |
| Attention: Chaitanya Srinivasamurthy , Section Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | STJ-SDMAN |
| Name of Grantee: | ICU Medical, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | SDIO Wireless Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0086 | ||
| CC | 15C | 2412.0 - 2462.0 | 0.1723 | ||
| CC | 15C | 5745.0 - 5825.0 | 0.198 |
| C2PC for New Host with new antennas. The highest reported SAR is 0.51 W/KG Single Modular Approval for mobile platforms. Output power listed is Conducted. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Bureau Veritas Consumer Products Services, Inc. 775 Montague Expressway Milpitas, CA 95035 |
Date of Grant: 05/10/2016 Application Dated: 05/10/2016 |
| ICU Medical, Inc. |
| 951 Calle Amanecer |
| San Clemente, CA 92673 |
| Attention: Chaitanya Srinivasamurthy , Section Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | STJ-SDMAN |
| Name of Grantee: | ICU Medical, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | SDIO Wireless Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0086 | ||
| CC | 15C | 2412.0 - 2462.0 | 0.1723 |
| Single Modular Approval for mobile platforms. Output power listed is Conducted. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application jAJFZU20H+zgEceIdti1Ig==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
ICU Medical, Inc. 951 Calle Amanecer San Clemente, CA 92673 United States |
Date of Grant: 05/10/2016 Application Dated: 05/10/2016 |
| Attention: Chaitanya Srinivasamurthy , Section Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | STJ-SDMAN |
| Name of Grantee: | ICU Medical, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | SDIO Wireless Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0086 | ||
| CC | 15C | 2412.0 - 2462.0 | 0.1723 |
| Single Modular Approval for mobile platforms. Output power listed is Conducted. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Bureau Veritas Consumer Products Services, Inc. 775 Montague Expressway Milpitas, CA 95035 |
Date of Grant: 05/12/2016 Application Dated: 05/12/2016 |
| ICU Medical, Inc. |
| 951 Calle Amanecer |
| San Clemente, CA 92673 |
| Attention: Chaitanya Srinivasamurthy , Section Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | STJ-SDMAN |
| Name of Grantee: | ICU Medical, Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | SDIO Wireless Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC | 15E | 5180.0 - 5240.0 | 0.0247 | ||
| 38 CC ND | 15E | 5260.0 - 5320.0 | 0.0247 | ||
| 38 CC ND | 15E | 5500.0 - 5580.0 | 0.018 | ||
| 38 CC ND | 15E | 5660.0 - 5700.0 | 0.02 | ||
| 38 CC | 15E | 5745.0 - 5825.0 | 0.198 |
| C2PC to update to UNII new rule. The highest reported SAR is 0.36 W/KG Single Modular Approval for mobile platforms. Output power listed is Conducted. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. This device complies with the Dynamic Frequency Selection (DFS) requirements of Report and Order FCC 03-287 as a Client only without Radar Detection. This device is capable of 20/40 bandwidths. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application HCD9zuR/Bk6nBpPwIS3OBQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
ICU Medical, Inc. 951 Calle Amanecer San Clemente, CA 92673 United States |
Date of Grant: 05/12/2016 Application Dated: 05/12/2016 |
| Attention: Chaitanya Srinivasamurthy , Section Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | STJ-SDMAN |
| Name of Grantee: | ICU Medical, Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | SDIO Wireless Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC | 15E | 5180.0 - 5240.0 | 0.0247 | ||
| 38 CC ND | 15E | 5260.0 - 5320.0 | 0.0247 | ||
| 38 CC ND | 15E | 5500.0 - 5580.0 | 0.018 | ||
| 38 CC ND | 15E | 5660.0 - 5700.0 | 0.02 | ||
| 38 CC | 15E | 5745.0 - 5825.0 | 0.198 |
| C2PC to update to UNII new rule. The highest reported SAR is 0.36 W/KG Single Modular Approval for mobile platforms. Output power listed is Conducted. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. This device complies with the Dynamic Frequency Selection (DFS) requirements of Report and Order FCC 03-287 as a Client only without Radar Detection. This device is capable of 20/40 bandwidths. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Bureau Veritas Consumer Products Services, Inc. 775 Montague Expressway Milpitas, CA 95035 |
Date of Grant: 06/06/2014 Application Dated: 06/06/2014 |
| ICU Medical, Inc. |
| 951 Calle Amanecer |
| San Clemente, CA 92673 |
| Attention: Chaitanya Srinivasamurthy , Section Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | STJ-SDMAN |
| Name of Grantee: | ICU Medical, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | SDIO Wireless Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0086 | ||
| CC | 15C | 2412.0 - 2462.0 | 0.1723 | ||
| CC | 15C | 5745.0 - 5825.0 | 0.198 |
| Single Modular Approval for mobile platforms. Output power listed is Conducted. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application 4ur5hyyPkBwUoGpPDrCSlw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
ICU Medical, Inc. 951 Calle Amanecer San Clemente, CA 92673 United States |
Date of Grant: 06/06/2014 Application Dated: 06/06/2014 |
| Attention: Chaitanya Srinivasamurthy , Section Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | STJ-SDMAN |
| Name of Grantee: | ICU Medical, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | SDIO Wireless Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0086 | ||
| CC | 15C | 2412.0 - 2462.0 | 0.1723 | ||
| CC | 15C | 5745.0 - 5825.0 | 0.198 |
| Single Modular Approval for mobile platforms. Output power listed is Conducted. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Bureau Veritas Consumer Products Services, Inc. 775 Montague Expressway Milpitas, CA 95035 |
Date of Grant: 06/13/2014 Application Dated: 06/13/2014 |
| ICU Medical, Inc. |
| 951 Calle Amanecer |
| San Clemente, CA 92673 |
| Attention: Chaitanya Srinivasamurthy , Section Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | STJ-SDMAN |
| Name of Grantee: | ICU Medical, Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | SDIO Wireless Module |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5320.0 | 0.0247 | ||
| CC ND | 15E | 5500.0 - 5580.0 | 0.018 | ||
| CC ND | 15E | 5660.0 - 5700.0 | 0.02 |
| C2PC for New Host with new antennas. The highest reported SAR is 0.36 W/KG Single Modular Approval for mobile platforms. Output power listed is Conducted. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. This device complies with the Dynamic Frequency Selection (DFS) requirements of Report and Order FCC 03-287 as a Client only without Radar Detection. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application +17Xk/3BVOgyXkV0Fh0rxQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
ICU Medical, Inc. 951 Calle Amanecer San Clemente, CA 92673 United States |
Date of Grant: 06/13/2014 Application Dated: 06/13/2014 |
| Attention: Chaitanya Srinivasamurthy , Section Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | STJ-SDMAN |
| Name of Grantee: | ICU Medical, Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | SDIO Wireless Module |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5320.0 | 0.0247 | ||
| CC ND | 15E | 5500.0 - 5580.0 | 0.018 | ||
| CC ND | 15E | 5660.0 - 5700.0 | 0.02 |
| C2PC for New Host with new antennas. The highest reported SAR is 0.36 W/KG Single Modular Approval for mobile platforms. Output power listed is Conducted. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. This device complies with the Dynamic Frequency Selection (DFS) requirements of Report and Order FCC 03-287 as a Client only without Radar Detection. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: |