FCC ID STZSRM9000AC
VHF MOBILE RADIO TRANSCEIVER
by Simoco Australasia Pty Ltd
Grantee Code: STZ Product Code: SRM9000AC
Latest application date: 2007-05-23
FCC ID Device Details
| FCC ID | STZSRM9000AC |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | STZ |
| Product Code | SRM9000AC |
| Applicant Business | Simoco Australasia Pty Ltd 🇦🇺 |
| Related Domains |  simocogroup.com |
| Equipment Class | VHF MOBILE RADIO TRANSCEIVER |
| Test Firm | EMC Technologies NZ Ltd. |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 150-174 MHz | Class II permissive change or modification of presently authorized equipment | 2007-05-23 |
| 150-174 MHz | Original Equipment | 2004-12-22 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| SERVICE AND ALIGNMENT MANUAL | Parts List/Tune Up Info | 2007-05-23 | PDF 2.7 MB |
| USERS MANUAL | Users Manual | 2007-05-23 | PDF 1.3 MB |
| USERS MANUAL 1 | Users Manual | 2004-12-22 | PDF 370.8 KB |
| USERS MANUAL 2 | Users Manual | 2004-12-22 | PDF 342 KB |
| INTERNAL PHOTOS 1 | Internal Photos | 2007-05-23 | PDF 694.8 KB |
| INTERNAL PHOTOS 2 | Internal Photos | 2007-05-23 | PDF 205.3 KB |
| INTERNAL PHOTOS | Internal Photos | 2004-12-22 | PDF 379 KB |
| EXTERNAL PHOTOS | External Photos | 2007-05-23 | PDF 538.6 KB |
| EXTENAL PHOTOS | External Photos | 2004-12-22 | PDF 270.8 KB |
| RESPONSE | External Photos | 2004-12-22 | PDF 61.4 KB |
| LABEL SAMPLE AND LOCATION 1 | ID Label/Location Info | 2007-05-23 | PDF 109.3 KB |
| LABEL SAMPLE AND LOCATION 2 | ID Label/Location Info | 2007-05-23 | PDF 126.6 KB |
| ID LABEL | ID Label/Location Info | 2004-12-22 | PDF 140.9 KB |
| BLOCK DIAGRAM 2 | Block Diagram | 2007-05-23 | PDF 49.6 KB |
| TEST SETUP PHOTOS | Test Setup Photos | 2007-05-23 | PDF 239.5 KB |
| RADIATED HAZARD CALCULATIONS | Test Report | 2007-05-23 | PDF 14.9 KB |
| TEST REPORT | Test Report | 2007-05-23 | PDF 1.4 MB |
| TEST REPORT | Test Report | 2004-12-22 | PDF 1.1 MB |
| CONFIDENTIALITY LETTER | Cover Letter(s) | 2007-05-23 | PDF 68.4 KB |
| FREQUENCY PROGRAMMING | Cover Letter(s) | 2007-05-23 | PDF 62 KB |
| SPECTRUM EFFIECIENCY | Cover Letter(s) | 2007-05-23 | PDF 71.7 KB |
| CONFIDENTIALITY LETTER | Cover Letter(s) | 2004-12-22 | PDF 101.9 KB |
| RESPONSE | Cover Letter(s) | 2004-12-22 | PDF 61.4 KB |
| PARTS LIST | Parts List/Tune Up Info | 2004-12-22 | PDF 9.5 KB |
| RF EXPOSURE 1 | RF Exposure Info | 2004-12-22 | PDF 77.2 KB |
| RF EXPOSURE 2 | RF Exposure Info | 2004-12-22 | PDF 117 KB |
| RF EXPOUSRE 3 | RF Exposure Info | 2004-12-22 | PDF 24 KB |
| BLOCK DIAGRAM Metadata only | Block Diagram | PDF 35.7 KB | |
| SCHEMATICS 1 Metadata only | Schematics | PDF 68.9 KB | |
| SCHEMATICS 2 Metadata only | Schematics | PDF 53.4 KB | |
| SCHEMATICS 3 Metadata only | Schematics | PDF 46.5 KB | |
| SCHEMATICS 4 Metadata only | Schematics | PDF 46.5 KB | |
| SCHEMATICS 5 Metadata only | Schematics | PDF 63.1 KB | |
| SCHEMATICS 6 Metadata only | Schematics | PDF 45.3 KB | |
| SCHEMATICS 7 Metadata only | Schematics | PDF 62.5 KB | |
| SCHEMATICS 8 Metadata only | Schematics | PDF 43.9 KB | |
| SCHEMATICS 9 Metadata only | Schematics | PDF 42.2 KB | |
| OPERATIONAL DESCRIPTION Metadata only | Operational Description | PDF 57.2 KB |
Application Information
| Application ID | GSBBGZ3iN7IxCWKUYENDeA== |
|---|---|
| Final Action Date | 2007-05-23 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0010966224 |
| Model | SRM9000AC |
| Frequency Range | 150-174 MHz |
| Equipment Class | TNB - Licensed Non-Broadcast Station Transmitter |
| Device Description | VHF MOBILE RADIO TRANSCEIVER |
| Responsible Party | Robert Stowell, Mr, Bob.Stowell@simocogroup.com , 0061-3-9730-3876 |
| Test Firm | Andrew Cutler, EMC Technologies NZ Ltd., auklab@ihug.co.nz  , 64-9-360-0862 |
| TCB Email | TEI@TIMCOENGR.COM  |
| TCB Scope | B2: General Mobile Radio And Broadcast Services equipment in the following 47 CFR Parts 22 (non-cellular) 73, 74, 90, 95 & 97 |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Power listed is conducted. This device must be restricted to work related operations in an Occupational/Controlled RF exposure Environment, not exceeding a maximum transmitting duty factor of 50%. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration, and the exposure conditions and/or duration of their passengers and bystanders, to comply with the General Population/Uncontrolled MPE limit and requirements. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting Occupational Exposure Requirements. Users and Installers must be provided with the training information, antenna installation, and transmitter operating conditions for satisfying RF exposure compliance. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 90cm from all persons and must not exceed an antenna gain of 0dBd. Power output is continuously variable from the value listed to 1 W. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| GSBBGZ3iN7IxCWKUYENDeA== | 2007-05-23 | Class II permissive change or modification of presently authorized equipment |
| V9KrFrwzLM9zR8+PMCLzEg== | 2004-12-22 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application V9KrFrwzLM9zR8+PMCLzEg==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 12/22/2004 Application Dated: 12/22/2004 |
| Simoco Wireless Solutions Pty Ltd |
| 1270 Ferntree Gully Road |
| Scoresby |
| Melbourne, Victoria, 3179 Australia |
| Attention: Barend Gildenhuys , Mr |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | STZSRM9000AC |
| Name of Grantee: | Simoco Wireless Solutions Pty Ltd |
| Equipment Class: | Licensed Non-Broadcast Station Transmitter |
| Notes: | VHF MOBILE TRANSMITTER |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 22, 90 | 150.0 - 174.0 | 25.0 | 5.0 PM | 11K0F3E | |
| 22, 90 | 150.0 - 174.0 | 25.0 | 5.0 PM | 8K10F1E | |
| 22, 90 | 150.0 - 174.0 | 25.0 | 5.0 PM | 16K0F3E |
| This device must be restricted to work related operations in an Occupational/Controlled RF exposure Environment, not exceeding a maximum transmitting duty factor of 50%. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration, and the exposure conditions and/or duration of their passengers and bystanders, to comply with the General Population/Uncontrolled MPE limit and requirements. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting Occupational Exposure Requirements. Users must be provided with the training information, antenna installation and transmitter operating conditions for satisfying RF exposure compliance. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 90cm from all persons and must not exceed an antenna gain of 0 dBd. |
EAS Grant - Application V9KrFrwzLM9zR8+PMCLzEg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Simoco Wireless Solutions Pty Ltd 1270 Ferntree Gully Road Scoresby Melbourne, Victoria, 3179 Australia |
Date of Grant: 12/22/2004 Application Dated: 12/22/2004 |
| Attention: Barend Gildenhuys , Mr |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | STZSRM9000AC |
| Name of Grantee: | Simoco Wireless Solutions Pty Ltd |
| Equipment Class: | Licensed Non-Broadcast Station Transmitter |
| Notes: | VHF MOBILE TRANSMITTER |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 22, 90 | 150.0 - 174.0 | 25.0 | 5.0 PM | 11K0F3E | |
| 22, 90 | 150.0 - 174.0 | 25.0 | 5.0 PM | 8K10F1E | |
| 22, 90 | 150.0 - 174.0 | 25.0 | 5.0 PM | 16K0F3E |
| This device must be restricted to work related operations in an Occupational/Controlled RF exposure Environment, not exceeding a maximum transmitting duty factor of 50%. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration, and the exposure conditions and/or duration of their passengers and bystanders, to comply with the General Population/Uncontrolled MPE limit and requirements. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting Occupational Exposure Requirements. Users must be provided with the training information, antenna installation and transmitter operating conditions for satisfying RF exposure compliance. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 90cm from all persons and must not exceed an antenna gain of 0 dBd. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION | TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
| Timco Engineering, Inc. 849 NW State Road 45 <BR>P.O. Box 370, Newberry, FL 32669 | Date of Grant: 05/23/2007 Application Dated: 05/22/2007 |
| Simoco Australasia Pty Ltd |
| 1270 Ferntree Gully Road |
| Scoresby |
| Melbourne, Victoria, 3179 Australia |
| Attention: Robert Stowell , Mr |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | STZSRM9000AC |
| Name of Grantee: | Simoco Australasia Pty Ltd |
| Equipment Class: | Licensed Non-Broadcast Station Transmitter |
| Notes: | VHF MOBILE RADIO TRANSCEIVER |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 22, 90 | 150.0 - 174.0 | 25.0 | 5.0 PM | 11K0F3E | |
| 22, 90 | 150.0 - 174.0 | 25.0 | 5.0 PM | 11K0F1D | |
| 22, 90 | 150.0 - 174.0 | 25.0 | 5.0 PM | 8K00F1E | |
| 22, 90 | 150.0 - 174.0 | 25.0 | 5.0 PM | 16K0F3E | |
| 22, 90 | 150.0 - 174.0 | 25.0 | 5.0 PM | 16K0F1D |
| Power listed is conducted. This device must be restricted to work related operations in an Occupational/Controlled RF exposure Environment, not exceeding a maximum transmitting duty factor of 50%. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration, and the exposure conditions and/or duration of their passengers and bystanders, to comply with the General Population/Uncontrolled MPE limit and requirements. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting Occupational Exposure Requirements. Users and Installers must be provided with the training information, antenna installation, and transmitter operating conditions for satisfying RF exposure compliance. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 90cm from all persons and must not exceed an antenna gain of 0dBd. Power output is continuously variable from the value listed to 1 W. |
EAS Grant - Application GSBBGZ3iN7IxCWKUYENDeA==
| COPY | FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION | COPY |
| Certification |
| Simoco Australasia Pty Ltd 1270 Ferntree Gully Road Scoresby Melbourne, Victoria, 3179 Australia | Date of Grant: 05/23/2007 Application Dated: 05/22/2007 |
| Attention: Robert Stowell , Mr |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | STZSRM9000AC |
| Name of Grantee: | Simoco Australasia Pty Ltd |
| Equipment Class: | Licensed Non-Broadcast Station Transmitter |
| Notes: | VHF MOBILE RADIO TRANSCEIVER |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 22, 90 | 150.0 - 174.0 | 25.0 | 5.0 PM | 11K0F3E | |
| 22, 90 | 150.0 - 174.0 | 25.0 | 5.0 PM | 11K0F1D | |
| 22, 90 | 150.0 - 174.0 | 25.0 | 5.0 PM | 8K00F1E | |
| 22, 90 | 150.0 - 174.0 | 25.0 | 5.0 PM | 16K0F3E | |
| 22, 90 | 150.0 - 174.0 | 25.0 | 5.0 PM | 16K0F1D |
| Power listed is conducted. This device must be restricted to work related operations in an Occupational/Controlled RF exposure Environment, not exceeding a maximum transmitting duty factor of 50%. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration, and the exposure conditions and/or duration of their passengers and bystanders, to comply with the General Population/Uncontrolled MPE limit and requirements. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting Occupational Exposure Requirements. Users and Installers must be provided with the training information, antenna installation, and transmitter operating conditions for satisfying RF exposure compliance. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 90cm from all persons and must not exceed an antenna gain of 0dBd. Power output is continuously variable from the value listed to 1 W.
|
| Mail To: |
| EA311985 |