FCC ID STZSRM9000TU
UHF MOBILE TRANSCEIVER
by Simoco Australasia Pty Ltd
Grantee Code: STZ Product Code: SRM9000TU
Latest application date: 2009-11-18
FCC ID Device Details
| FCC ID | STZSRM9000TU |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | STZ |
| Product Code | SRM9000TU |
| Applicant Business | Simoco Australasia Pty Ltd 🇦🇺 |
| Related Domains |  simocogroup.com |
| Equipment Class | UHF MOBILE TRANSCEIVER |
| Test Firm | EMC Technologies NZ Ltd. |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 406.1-480 MHz | Class II permissive change or modification of presently authorized equipment | 2009-11-18 |
| 406.1-480 MHz | Original Equipment | 2007-07-19 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| SERVICE MANUAL | Users Manual | 2007-07-19 | PDF 1.9 MB |
| USERS MANUAL | Users Manual | 2007-07-19 | PDF 1.3 MB |
| INTERNAL VIEWS | Internal Photos | 2007-07-19 | PDF 552.2 KB |
| External Photos | External Photos | 2009-11-18 | PDF 192.3 KB |
| EXTERNAL VIEWS | External Photos | 2007-07-19 | PDF 205.7 KB |
| Label Photos | ID Label/Location Info | 2009-11-18 | PDF 192.3 KB |
| LABEL INFORMATION | ID Label/Location Info | 2007-07-19 | PDF 109.4 KB |
| Radiated Emissions Test Setup | Test Setup Photos | 2009-11-18 | PDF 115.8 KB |
| RADIATED EMISSION TEST SETUP PHOTOS | Test Setup Photos | 2007-07-19 | PDF 905.1 KB |
| Test Report | Test Report | 2009-11-18 | PDF 327 KB |
| TEST REPORT | Test Report | 2007-07-19 | PDF 1.1 MB |
| Permissive Change Request | Cover Letter(s) | 2009-11-18 | PDF 28.6 KB |
| CONFIDENTIALITY | Cover Letter(s) | 2007-07-19 | PDF 65.7 KB |
| CONFIDENTIALITY REQUEST | Cover Letter(s) | 2007-07-19 | PDF 3.3 KB |
| FREQUENCY COMPLIANCE | Cover Letter(s) | 2007-07-19 | PDF 61.7 KB |
| SPECTRUM EFFICIENCY | Cover Letter(s) | 2007-07-19 | PDF 71.1 KB |
| ALIGNMENT PROCEDURES | Parts List/Tune Up Info | 2007-07-19 | PDF 756.9 KB |
| RADIATION HAZARD ASSESMENT | RF Exposure Info | 2007-07-19 | PDF 14.9 KB |
Application Information
| Application ID | ZFj0tb/8+xhqLPVhG2rDlQ== |
|---|---|
| Final Action Date | 2009-11-18 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0010966224 |
| Model | SRM9000TU |
| Frequency Range | 406.1-480 MHz |
| Equipment Class | TNB - Licensed Non-Broadcast Station Transmitter |
| Device Description | UHF MOBILE TRANSCEIVER |
| Responsible Party | Robert Stowell, Mr, Bob.Stowell@simocogroup.com , 0061-3-9730-3876 |
| Test Firm | Andrew Cutler, EMC Technologies NZ Ltd., auklab@ihug.co.nz  , 64-9-360-0862 |
| TCB Email | TEI@TIMCOENGR.COM  |
| TCB Scope | B2: General Mobile Radio And Broadcast Services equipment in the following 47 CFR Parts 22 (non-cellular) 73, 74, 90, 95 & 97 |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | No |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Power listed is conducted. This device must be restricted to work related operations in an Occupational/Controlled RF exposure Environment, not exceeding a maximum transmitting duty factor of 50%. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration, and the exposure conditions and/or duration of their passengers and bystanders, to comply with the General Population/Controlled MPE limit and requirements. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting Occupational Exposure Requirements. Users must be provided with the training information, antenna installation and transmitter operating conditions for satisfying RF exposure compliance. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 75cm from all persons and must not exceed an antenna gain of 2.14 dBi. (Orig. Grant: 07/19/2007) Class II Change: This Class II Change incorporates a new enclosure. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| ZFj0tb/8+xhqLPVhG2rDlQ== | 2009-11-18 | Class II permissive change or modification of presently authorized equipment |
| kEJ1Tso74VC5HHY5Vrkl2g== | 2007-07-19 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application ZFj0tb/8+xhqLPVhG2rDlQ==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 <BR>P.O. Box 370, Newberry, FL 32669 |
Date of Grant: 11/18/2009 Application Dated: 11/18/2009 |
| Simoco Australasia Pty Ltd |
| 1270 Ferntree Gully Road |
| Scoresby |
| Melbourne, Victoria, 3179 Australia |
| Attention: Robert Stowell , Mr |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | STZSRM9000TU |
| Name of Grantee: | Simoco Australasia Pty Ltd |
| Equipment Class: | Licensed Non-Broadcast Station Transmitter |
| Notes: | UHF MOBILE TRANSCEIVER |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 22, 90 | 406.1 - 480.0 | 25.0 | 2.5 PM | 11K2F3E | |
| 22, 90 | 406.1 - 480.0 | 25.0 | 2.5 PM | 8K10F1E | |
| 22, 90 | 406.1 - 480.0 | 25.0 | 2.5 PM | 11K2F1D | |
| 22, 90 | 406.1 - 480.0 | 25.0 | 2.5 PM | 16K0F3E | |
| 22, 90 | 406.1 - 480.0 | 25.0 | 2.5 PM | 16K0F1D |
| Power listed is conducted. This device must be restricted to work related operations in an Occupational/Controlled RF exposure Environment, not exceeding a maximum transmitting duty factor of 50%. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration, and the exposure conditions and/or duration of their passengers and bystanders, to comply with the General Population/Controlled MPE limit and requirements. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting Occupational Exposure Requirements. Users must be provided with the training information, antenna installation and transmitter operating conditions for satisfying RF exposure compliance. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 75cm from all persons and must not exceed an antenna gain of 2.14 dBi. (Orig. Grant: 07/19/2007) Class II Change: This Class II Change incorporates a new enclosure. |
EAS Grant - Application ZFj0tb/8+xhqLPVhG2rDlQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Simoco Australasia Pty Ltd 1270 Ferntree Gully Road Scoresby Melbourne, Victoria, 3179 Australia |
Date of Grant: 11/18/2009 Application Dated: 11/18/2009 |
| Attention: Robert Stowell , Mr |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | STZSRM9000TU |
| Name of Grantee: | Simoco Australasia Pty Ltd |
| Equipment Class: | Licensed Non-Broadcast Station Transmitter |
| Notes: | UHF MOBILE TRANSCEIVER |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 22, 90 | 406.1 - 480.0 | 25.0 | 2.5 PM | 11K2F3E | |
| 22, 90 | 406.1 - 480.0 | 25.0 | 2.5 PM | 8K10F1E | |
| 22, 90 | 406.1 - 480.0 | 25.0 | 2.5 PM | 11K2F1D | |
| 22, 90 | 406.1 - 480.0 | 25.0 | 2.5 PM | 16K0F3E | |
| 22, 90 | 406.1 - 480.0 | 25.0 | 2.5 PM | 16K0F1D |
| Power listed is conducted. This device must be restricted to work related operations in an Occupational/Controlled RF exposure Environment, not exceeding a maximum transmitting duty factor of 50%. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration, and the exposure conditions and/or duration of their passengers and bystanders, to comply with the General Population/Controlled MPE limit and requirements. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting Occupational Exposure Requirements. Users must be provided with the training information, antenna installation and transmitter operating conditions for satisfying RF exposure compliance. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 75cm from all persons and must not exceed an antenna gain of 2.14 dBi. (Orig. Grant: 07/19/2007) Class II Change: This Class II Change incorporates a new enclosure. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION | TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
| Timco Engineering, Inc. 849 NW State Road 45 <BR>P.O. Box 370, Newberry, FL 32669 | Date of Grant: 07/19/2007 Application Dated: 07/18/2007 |
| Simoco Australasia Pty Ltd |
| 1270 Ferntree Gully Road |
| Scoresby |
| Melbourne, Victoria, 3179 Australia |
| Attention: Robert Stowell , Mr |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | STZSRM9000TU |
| Name of Grantee: | Simoco Australasia Pty Ltd |
| Equipment Class: | Licensed Non-Broadcast Station Transmitter |
| Notes: | UHF MOBILE TRANSCEIVER |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 22, 90 | 406.1 - 480.0 | 25.0 | 2.5 PM | 11K2F3E | |
| 22, 90 | 406.1 - 480.0 | 25.0 | 2.5 PM | 8K10F1E | |
| 22, 90 | 406.1 - 480.0 | 25.0 | 2.5 PM | 11K2F1D | |
| 22, 90 | 406.1 - 480.0 | 25.0 | 2.5 PM | 16K0F3E | |
| 22, 90 | 406.1 - 480.0 | 25.0 | 2.5 PM | 16K0F1D |
| Power listed is conducted. This device must be restricted to work related operations in an Occupational/Controlled RF exposure Environment, not exceeding a maximum transmitting duty factor of 50%. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration, and the exposure conditions and/or duration of their passengers and bystanders, to comply with the General Population/Controlled MPE limit and requirements. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting Occupational Exposure Requirements. Users must be provided with the training information, antenna installation and transmitter operating conditions for satisfying RF exposure compliance. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 75cm from all persons and must not exceed an antenna gain of 2.14 dBi. |
EAS Grant - Application kEJ1Tso74VC5HHY5Vrkl2g==
| COPY | FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION | COPY |
| Certification |
| Simoco Australasia Pty Ltd 1270 Ferntree Gully Road Scoresby Melbourne, Victoria, 3179 Australia | Date of Grant: 07/19/2007 Application Dated: 07/18/2007 |
| Attention: Robert Stowell , Mr |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | STZSRM9000TU |
| Name of Grantee: | Simoco Australasia Pty Ltd |
| Equipment Class: | Licensed Non-Broadcast Station Transmitter |
| Notes: | UHF MOBILE TRANSCEIVER |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 22, 90 | 406.1 - 480.0 | 25.0 | 2.5 PM | 11K2F3E | |
| 22, 90 | 406.1 - 480.0 | 25.0 | 2.5 PM | 8K10F1E | |
| 22, 90 | 406.1 - 480.0 | 25.0 | 2.5 PM | 11K2F1D | |
| 22, 90 | 406.1 - 480.0 | 25.0 | 2.5 PM | 16K0F3E | |
| 22, 90 | 406.1 - 480.0 | 25.0 | 2.5 PM | 16K0F1D |
| Power listed is conducted. This device must be restricted to work related operations in an Occupational/Controlled RF exposure Environment, not exceeding a maximum transmitting duty factor of 50%. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration, and the exposure conditions and/or duration of their passengers and bystanders, to comply with the General Population/Controlled MPE limit and requirements. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting Occupational Exposure Requirements. Users must be provided with the training information, antenna installation and transmitter operating conditions for satisfying RF exposure compliance. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 75cm from all persons and must not exceed an antenna gain of 2.14 dBi.
|
| Mail To: |
| EA221179 |