FCC ID STZSRM9000UW
UHF Mobile Tranceiver
by Simoco Australasia Pty Ltd
Grantee Code: STZ Product Code: SRM9000UW
Latest application date: 2007-05-30
FCC ID Device Details
| FCC ID | STZSRM9000UW |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | STZ |
| Product Code | SRM9000UW |
| Applicant Business | Simoco Australasia Pty Ltd 🇦🇺 |
| Related Domains |  simocogroup.com |
| Equipment Class | UHF Mobile Tranceiver |
| Test Firm | EMC Technologies Pty. Ltd. |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 440-512 MHz | Class II permissive change or modification of presently authorized equipment | 2007-05-30 |
| 440-512 MHz | Original Equipment | 2004-12-22 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| alignment manual | Parts List/Tune Up Info | 2007-05-30 | PDF 756.9 KB |
| service manual | Users Manual | 2007-05-30 | PDF 1.9 MB |
| users manual | Users Manual | 2007-05-30 | PDF 1.3 MB |
| USERS MANUAL 1 | Users Manual | 2004-12-22 | PDF 370.8 KB |
| USERS MANUAL 2 | Users Manual | 2004-12-22 | PDF 342 KB |
| internal photos 1 | Internal Photos | 2007-05-30 | PDF 518.8 KB |
| internal photos 2 | Internal Photos | 2007-05-30 | PDF 208.6 KB |
| INTERNAL PHOTOS | Internal Photos | 2004-12-22 | PDF 443.6 KB |
| external photos | External Photos | 2007-05-30 | PDF 370.9 KB |
| EXTERNAL PHOTOS | External Photos | 2004-12-22 | PDF 263.1 KB |
| label sample and location 1 | ID Label/Location Info | 2007-05-30 | PDF 111.4 KB |
| label sample and location 2 | ID Label/Location Info | 2007-05-30 | PDF 254.4 KB |
| ID LABEL | ID Label/Location Info | 2004-12-22 | PDF 145 KB |
| frequency programming | Test Report | 2007-05-30 | PDF 62.4 KB |
| spectrum efficiency | Test Report | 2007-05-30 | PDF 71.5 KB |
| test report | Test Report | 2007-05-30 | PDF 1.4 MB |
| TEST REPORT | Test Report | 2004-12-22 | PDF 1.2 MB |
| class II change letter | Cover Letter(s) | 2007-05-30 | PDF 38.5 KB |
| request for confidentiality | Cover Letter(s) | 2007-05-30 | PDF 66.2 KB |
| CONFIDENTIALITY LETTER | Cover Letter(s) | 2004-12-22 | PDF 102.1 KB |
| radiation hazard assessment | RF Exposure Info | 2007-05-30 | PDF 14.9 KB |
| PARTS LIST 1 | Parts List/Tune Up Info | 2004-12-22 | PDF 86.6 KB |
| PARTS LIST 2 | Parts List/Tune Up Info | 2004-12-22 | PDF 9.6 KB |
| RF EXPOSURE 1 | RF Exposure Info | 2004-12-22 | PDF 80 KB |
| RF EXPOSURE 2 | RF Exposure Info | 2004-12-22 | PDF 117 KB |
| RF EXPOSURE 3 | RF Exposure Info | 2004-12-22 | PDF 24 KB |
| BLOCK DIAGRAM Metadata only | Block Diagram | PDF 35.3 KB | |
| SCHEMATICS 1 Metadata only | Schematics | PDF 42.2 KB | |
| SCHEMATICS 2 Metadata only | Schematics | PDF 43.9 KB | |
| SCHEMATICS 3 Metadata only | Schematics | PDF 53.4 KB | |
| SCHEMATICS 4 Metadata only | Schematics | PDF 46.6 KB | |
| SCHEMATICS 5 Metadata only | Schematics | PDF 62.5 KB | |
| SCHEMATICS 6 Metadata only | Schematics | PDF 69.3 KB | |
| SCHEMATICS 7 Metadata only | Schematics | PDF 45.3 KB | |
| SCHEMATICS 8 Metadata only | Schematics | PDF 63.1 KB | |
| SCHEMATICS 9 Metadata only | Schematics | PDF 47.3 KB | |
| OPERATIONAL DESCRIPTION Metadata only | Operational Description | PDF 57.2 KB |
Application Information
| Application ID | 63v0jIEWFyuPD01nhlE3ug== |
|---|---|
| Final Action Date | 2007-05-30 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0010966224 |
| Model | SRM9000UW |
| Frequency Range | 440-512 MHz |
| Equipment Class | TNB - Licensed Non-Broadcast Station Transmitter |
| Device Description | UHF Mobile Tranceiver |
| Responsible Party | Robert Stowell, Mr, Bob.Stowell@simocogroup.com , 0061-3-9730-3876 |
| Test Firm | Michael Evans, EMC Technologies Pty. Ltd., brisbane@emctech.com.au  , 617-3875-2455 |
| TCB Email | TEI@TIMCOENGR.COM  |
| TCB Scope | B2: General Mobile Radio And Broadcast Services equipment in the following 47 CFR Parts 22 (non-cellular) 73, 74, 90, 95 & 97 |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Power listed is conducted. This device must be restricted to work related operations in an Occupational/Controlled RF exposure Environment, not exceeding a maximum transmitting duty factor of 50%. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration, and the exposure conditions and/or duration of their passengers and bystanders, to comply with the General Population/Uncontrolled MPE limit and requirements. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting Occupational Exposure Requirements. Users and Installers must be provided with the training information, antenna installation, and transmitter operating conditions for satisfying RF exposure compliance. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 75cm from all persons and must not exceed an antenna gain of 0dBd. Power output is continuously variable from the value listed to 1 W. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| 63v0jIEWFyuPD01nhlE3ug== | 2007-05-30 | Class II permissive change or modification of presently authorized equipment |
| 9LhpEc+OGRL24cXX2RPtJg== | 2004-12-22 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application 9LhpEc+OGRL24cXX2RPtJg==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 12/22/2004 Application Dated: 12/22/2004 |
| Simoco Wireless Solutions Pty Ltd |
| 1270 Ferntree Gully Road |
| Scoresby |
| Melbourne, Victoria, 3179 Australia |
| Attention: Barend Gildenhuys , Mr |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | STZSRM9000UW |
| Name of Grantee: | Simoco Wireless Solutions Pty Ltd |
| Equipment Class: | Licensed Non-Broadcast Station Transmitter |
| Notes: | UHF MOBILE TRANSMITTER |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 22, 90 | 440.0 - 512.0 | 25.0 | 2.5 PM | 11K0F3E | |
| 22, 90 | 440.0 - 512.0 | 25.0 | 2.5 PM | 8K00F1E | |
| 22, 90 | 440.0 - 512.0 | 25.0 | 2.5 PM | 16K0F3E | |
| 22, 90 | 440.0 - 512.0 | 25.0 | 2.5 PM | 11K0F1D | |
| 22, 90 | 440.0 - 512.0 | 25.0 | 2.5 PM | 16K0F1D |
| Power listed is conducted. Vehicle operation: This device must be restricted to work related operations in an Occupational/Controlled RF exposure Environment, not exceeding a maximum transmitting duty factor of 50%. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration, and the exposure conditions and/or duration of their passengers and bystanders, to comply with the General Population/Uncontrolled MPE limit and requirements. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting Occupational Exposure Requirements. Users must be provided with the training information, antenna installation and transmitter operating conditions for satisfying RF exposure compliance. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 75cm from all persons and must not exceed an antenna gain of 0 dBd. Fixed operation: The antenna(s) used for this transmitter must be fixed-mounted on outdoor permanent structures with a separation distance of at least 90c????m from all persons during normal operation. The peak conducted output power at each antenna terminal must not exceed 25W and the peak radiated output power must not exceed ????W EIRP. Users and installers must be provided with appropriate antenna installation instructions and transmitter operating conditions, including antenna co-location requirements of §1.1307(b)(3), for satisfying RF exposure compliance. |
EAS Grant - Application 9LhpEc+OGRL24cXX2RPtJg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Simoco Wireless Solutions Pty Ltd 1270 Ferntree Gully Road Scoresby Melbourne, Victoria, 3179 Australia |
Date of Grant: 12/22/2004 Application Dated: 12/22/2004 |
| Attention: Barend Gildenhuys , Mr |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | STZSRM9000UW |
| Name of Grantee: | Simoco Wireless Solutions Pty Ltd |
| Equipment Class: | Licensed Non-Broadcast Station Transmitter |
| Notes: | UHF MOBILE TRANSMITTER |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 22, 90 | 440.0 - 512.0 | 25.0 | 2.5 PM | 11K0F3E | |
| 22, 90 | 440.0 - 512.0 | 25.0 | 2.5 PM | 8K00F1E | |
| 22, 90 | 440.0 - 512.0 | 25.0 | 2.5 PM | 16K0F3E | |
| 22, 90 | 440.0 - 512.0 | 25.0 | 2.5 PM | 11K0F1D | |
| 22, 90 | 440.0 - 512.0 | 25.0 | 2.5 PM | 16K0F1D |
| Power listed is conducted. Vehicle operation: This device must be restricted to work related operations in an Occupational/Controlled RF exposure Environment, not exceeding a maximum transmitting duty factor of 50%. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration, and the exposure conditions and/or duration of their passengers and bystanders, to comply with the General Population/Uncontrolled MPE limit and requirements. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting Occupational Exposure Requirements. Users must be provided with the training information, antenna installation and transmitter operating conditions for satisfying RF exposure compliance. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 75cm from all persons and must not exceed an antenna gain of 0 dBd. Fixed operation: The antenna(s) used for this transmitter must be fixed-mounted on outdoor permanent structures with a separation distance of at least 90c????m from all persons during normal operation. The peak conducted output power at each antenna terminal must not exceed 25W and the peak radiated output power must not exceed ????W EIRP. Users and installers must be provided with appropriate antenna installation instructions and transmitter operating conditions, including antenna co-location requirements of §1.1307(b)(3), for satisfying RF exposure compliance. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION | TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
| Timco Engineering, Inc. 849 NW State Road 45 <BR>P.O. Box 370, Newberry, FL 32669 | Date of Grant: 05/30/2007 Application Dated: 05/25/2007 |
| Simoco Australasia Pty Ltd |
| 1270 Ferntree Gully Road |
| Scoresby |
| Melbourne, Victoria, 3179 Australia |
| Attention: Robert Stowell , Mr |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | STZSRM9000UW |
| Name of Grantee: | Simoco Australasia Pty Ltd |
| Equipment Class: | Licensed Non-Broadcast Station Transmitter |
| Notes: | UHF Mobile Tranceiver |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 22, 90 | 440.0 - 512.0 | 25.0 | 2.5 PM | 11K0F3E | |
| 22, 90 | 440.0 - 512.0 | 25.0 | 2.5 PM | 8K00F1E | |
| 22, 90 | 440.0 - 512.0 | 25.0 | 2.5 PM | 16K0F3E | |
| 22, 90 | 440.0 - 512.0 | 25.0 | 2.5 PM | 16K0F1D | |
| 22, 90 | 440.0 - 512.0 | 25.0 | 2.5 PM | 11K2F1D |
| Power listed is conducted. This device must be restricted to work related operations in an Occupational/Controlled RF exposure Environment, not exceeding a maximum transmitting duty factor of 50%. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration, and the exposure conditions and/or duration of their passengers and bystanders, to comply with the General Population/Uncontrolled MPE limit and requirements. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting Occupational Exposure Requirements. Users and Installers must be provided with the training information, antenna installation, and transmitter operating conditions for satisfying RF exposure compliance. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 75cm from all persons and must not exceed an antenna gain of 0dBd. Power output is continuously variable from the value listed to 1 W. |
EAS Grant - Application 63v0jIEWFyuPD01nhlE3ug==
| COPY | FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION | COPY |
| Certification |
| Simoco Australasia Pty Ltd 1270 Ferntree Gully Road Scoresby Melbourne, Victoria, 3179 Australia | Date of Grant: 05/30/2007 Application Dated: 05/25/2007 |
| Attention: Robert Stowell , Mr |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | STZSRM9000UW |
| Name of Grantee: | Simoco Australasia Pty Ltd |
| Equipment Class: | Licensed Non-Broadcast Station Transmitter |
| Notes: | UHF Mobile Tranceiver |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 22, 90 | 440.0 - 512.0 | 25.0 | 2.5 PM | 11K0F3E | |
| 22, 90 | 440.0 - 512.0 | 25.0 | 2.5 PM | 8K00F1E | |
| 22, 90 | 440.0 - 512.0 | 25.0 | 2.5 PM | 16K0F3E | |
| 22, 90 | 440.0 - 512.0 | 25.0 | 2.5 PM | 16K0F1D | |
| 22, 90 | 440.0 - 512.0 | 25.0 | 2.5 PM | 11K2F1D |
| Power listed is conducted. This device must be restricted to work related operations in an Occupational/Controlled RF exposure Environment, not exceeding a maximum transmitting duty factor of 50%. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration, and the exposure conditions and/or duration of their passengers and bystanders, to comply with the General Population/Uncontrolled MPE limit and requirements. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting Occupational Exposure Requirements. Users and Installers must be provided with the training information, antenna installation, and transmitter operating conditions for satisfying RF exposure compliance. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 75cm from all persons and must not exceed an antenna gain of 0dBd. Power output is continuously variable from the value listed to 1 W.
|
| Mail To: |
| EA297696 |