FCC ID STZSRMA9000AC

STZ-SRMA9000AC, STZ SRMA9000AC, STZSRMA9000AC, STZSRMA9OOOAC, STZ5RMA9000AC, 5TZ5RMA9000AC

Simoco Australasia Pty Ltd VHF MOBILE TRANSCEIVER SRMA9000AC

An FCC ID is the product ID assigned by the FCC to identify wireless products in the market. The FCC chooses 3 or 5 character "Grantee" codes to identify the business that created the product. For example, the grantee code for FCC ID: STZSRMA9000AC is STZ. The remaining characters of the FCC ID, SRMA9000AC, are often associated with the product model, but they can be random. These letters are chosen by the applicant. In addition to the application, the FCC also publishes internal images, external images, user manuals, and test results for wireless devices. They can be under the "exhibits" tab below.

Purchase on Amazon: VHF MOBILE TRANSCEIVER

Application: VHF MOBILE TRANSCEIVER
Equipment Class: TNB - Licensed Non-Broadcast Station Transmitter
Short Link: fcc.id/STZSRMA9000AC
Sources: FCC.gov | FCC.report
Registered By: Simoco Australasia Pty Ltd - STZ (Australia)

App #	Purpose	Date	Unique ID
1	Original Equipment	2012-12-13	OvnHMGLfupzRoXwaERtGXA==

Operating Frequencies

Frequency Range	Power Output	Tolerance	Emission Designator	Rule Parts	Grant Notes	Line Entry
150-174 MHz	25 Watts	5ppm	11K0F3E	9	EF	1
150-174 MHz	25 Watts	5ppm	8K10F1D	9	EF	2
150-174 MHz	25 Watts	5ppm	8K10F1E	9	EF	3

Exhibits

Document	Type	Submitted Available
USERS MANUAL B	Users Manual Adobe Acrobat PDF (2434 kB)	2012-12-13 2012-12-13
USERS MANUAL A	Users Manual Adobe Acrobat PDF (4163 kB)	2012-12-13 2012-12-13
TEST REPORT	Test Report Adobe Acrobat PDF (2189 kB)	2012-12-13 2012-12-13
SPECTRUM EFFICIENCY	Cover Letter(s) Adobe Acrobat PDF (66 kB)	2012-12-13 2012-12-13
SERVICE MANUAL NON DISCLOSURE AGREEMENT	Cover Letter(s) Adobe Acrobat PDF (54 kB)	2012-12-13 2012-12-13
RADIATION HAZARD ASSESSMENT	RF Exposure Info Adobe Acrobat PDF (137 kB)	2012-12-13 2012-12-13
RADIATED EMISSIONS TEST SETUP PHOTOS	Test Setup Photos Adobe Acrobat PDF (1900 kB)	2012-12-13 2012-12-13
POWER AMPLIFIER ATTESTATION	Cover Letter(s) Adobe Acrobat PDF (63 kB)	2012-12-13 2012-12-13
LABEL DETAILS	ID Label/Location Info Adobe Acrobat PDF (141 kB)	2012-12-13 2012-12-13
INTERNAL PHOTOS	Internal Photos Adobe Acrobat PDF (592 kB)	2012-12-13 2012-12-13
FREQUENCY PROGRAMMING	Cover Letter(s) Adobe Acrobat PDF (63 kB)	2012-12-13 2012-12-13
EXTERNAL PHOTOS	External Photos Adobe Acrobat PDF (344 kB)	2012-12-13 2012-12-13
EXTENDED FREQUENCY JUSTIFICATION	Cover Letter(s) Adobe Acrobat PDF (66 kB)	2012-12-13 2012-12-13
CONFIDENTIALITY REQUEST	Cover Letter(s) Adobe Acrobat PDF (69 kB)	2012-12-13 2012-12-13
RAD HAZ WARNING LABEL	ID Label/Location Info Adobe Acrobat PDF (179 kB)	2012-12-13 2012-12-13
AUTHORIZATION TO ACT	Cover Letter(s) Adobe Acrobat PDF (64 kB)	2012-12-13 2012-12-13
PARTS LIST	Parts List/Tune Up Info Adobe Acrobat PDF (41 kB)	2012-12-13
ALIGNMENT PROCEDURE	Parts List/Tune Up Info Adobe Acrobat PDF (481 kB)	2012-12-13
SERVICE MANUAL	Users Manual Adobe Acrobat PDF (1075 kB)	2012-12-13
OPERATIONAL DESCRIPTION	Operational Description Adobe Acrobat PDF (295 kB)	2012-12-13
BLOCK DIAGRAM	Block Diagram Adobe Acrobat PDF (88 kB)	2012-12-13
SCHEMATICS	Schematics Adobe Acrobat PDF (492 kB)	2012-12-13

Application Forms

Application for Equipment Authorization FCC Form 731 TCB Version

Applicant Information

Applicant's complete, legal business name:	Simoco Australasia Pty Ltd
FCC Registration Number (FRN):	0010966224
Alphanumeric FCC ID:	STZSRMA9000AC
Unique Application Identifier:	OvnHMGLfupzRoXwaERtGXA==
Line one:	1270 Ferntree Gully Road
Line two:	Scoresby
City:	Melbourne, Victoria
State:	N/A
Country:	Australia
Zip Code:	3179

TCB Information

TCB Application Email Address:	TEI@TIMCOENGR.COM
TCB Scope:	B2: General Mobile Radio And Broadcast Services equipment in the following 47 CFR Parts 22 (non-cellular) 73, 74, 90, 95 & 97

FCC ID

Grantee Code:	STZ
Product Code:	SRMA9000AC

Person at the applicant's address to receive grant or for contact

Name:	Robert Stowell
Title:	Mr

Telephone Number:

0061-3-9730-3876

Extension:

Fax Number:	0061-3-9730-3968
Email:	Bob.Stowell@simocogroup.com

Long-Term Confidentiality

Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: Yes

Short-Term Confidentiality

Does short-term confidentiality apply to this application?: No

If so, specify the short-term confidentiality release date (MM/DD/YYYY format):
Note: If no date is supplied, the release date will be set to 45 calendar days past the date of grant.

Software Defined/Cognitive Radio

Is this application for software defined/cognitive radio authorization? No

Equipment Class

Equipment Class: TNB - Licensed Non-Broadcast Station Transmitter
Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant):	VHF MOBILE TRANSCEIVER

Related OET KnowledgeDataBase Inquiry

Is there a KDB inquiry associated with this application? No

Modular Equipment

Modular Type: Does not apply

Application Purpose

Application is for: Original Equipment

Composite/Related Equipment

Is the equipment in this application a composite device subject to an additional equipment authorization? No

Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? No

Test Firm Information

Name of test firm and contact person on file with the FCC:

Firm Name: EMC Technologies NZ Ltd.

First Name: Andrew

Last Name: Cutler

Telephone Number:

64-9-360-0862

Extension:

Fax Number: 64-9-360-0861

E-mail: auklab@ihug.co.nz

Grant Comments

Enter any text that you would like to appear at the bottom of the Grant of Equipment Authorization:
Power listed is conducted. This device must be restricted to work related operations in an Occupational/Controlled RF exposure Environment, not exceeding a maximum transmitting duty factor of 50%. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration, and the exposure conditions and/or duration of their passengers and bystanders, to comply with the General Population/Controlled MPE limit and requirements. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting Occupational Exposure Requirements. Users must be provided with the training information, antenna installation and transmitter operating conditions for satisfying RF exposure compliance. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 90 cm from all persons and must not exceed an antenna gain of 1.65 dBd.

Set the grant of this application to be deferred to a specified date:
No

Equipment Authorization Waiver

Is there an equipment authorization waiver associated with this application? No

If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?: No

WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND IMPRISONMENT (U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1)), AND/OR FORFEITURE (U.S. CODE, TITLE 47, SECTION 503).

SECTION 5301 (ANTI-DRUG ABUSE) CERTIFICATION:

The applicant must certify that neither the applicant nor any party to the application is subject to a denial of Federal benefits, that include FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. § 862 because of a conviction for possession or distribution of a controlled substance. See 47 CFR 1.2002(b) for the definition of a "party" for these purposes.

Does the applicant or authorized agent so certify? Yes

Applicant/Agent Certification:

I certify that I am authorized to sign this application. All of the statements herein and the exhibits attached hereto, are true and correct to the best of my knowledge and belief. In accepting a Grant of Equipment Authorization as a result of the representations made in this application, the applicant is responsible for (1) labeling the equipment with the exact FCC ID specified in this application, (2) compliance statement labeling pursuant to the applicable rules, and (3) compliance of the equipment with the applicable technical rules. If the applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC's technical requirements.

Authorizing an agent to sign this application, is done solely at the applicant's discretion; however, the applicant remains responsible for all statements in this application.

If an agent has signed this application on behalf of the applicant, a written letter of authorization which includes information to enable the agent to respond to the above section 5301 (Anti-Drug Abuse) Certification statement has been provided by the applicant. It is understood that the letter of authorization must be submitted to the FCC upon request, and that the FCC reserves the right to contact the applicant directly at any time.

Signature of Authorized Person Filing: ANDREW CUTLER

Title of authorized signature:

Grants

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

Timco Engineering, Inc.
849 NW State Road 45 <BR>P.O. Box 370,
Newberry, FL 32669

Date of Grant: 12/13/2012

Application Dated: 12/13/2012

Simoco Australasia Pty Ltd

1270 Ferntree Gully Road

Scoresby

Melbourne, Victoria, 3179
Australia

Attention: Robert Stowell , Mr

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	STZSRMA9000AC

Name of Grantee:	Simoco Australasia Pty Ltd

Equipment Class:	Licensed Non-Broadcast Station Transmitter
Notes:	VHF MOBILE TRANSCEIVER

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
EF	90	150.0 - 174.0	25.0	5.0 PM	11K0F3E
EF	90	150.0 - 174.0	25.0	5.0 PM	8K10F1D
EF	90	150.0 - 174.0	25.0	5.0 PM	8K10F1E

Power listed is conducted. This device must be restricted to work related operations in an Occupational/Controlled RF exposure Environment, not exceeding a maximum transmitting duty factor of 50%. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration, and the exposure conditions and/or duration of their passengers and bystanders, to comply with the General Population/Controlled MPE limit and requirements. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting Occupational Exposure Requirements. Users must be provided with the training information, antenna installation and transmitter operating conditions for satisfying RF exposure compliance. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 90 cm from all persons and must not exceed an antenna gain of 1.65 dBd.

EF:	This device may contain functions that are not operational in U.S Territories except as noted in the filing. This grant has extended frequencies as noted in the filing and Section 2.927(b) applies to this authorization.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Simoco Australasia Pty Ltd
1270 Ferntree Gully Road Scoresby
Melbourne, Victoria, 3179
Australia