FCC ID SVC-USBDAC2RX

Wireless USB DAC2

by Lenbrook Industries Limited

Grantee Code: SVC   Product Code: USBDAC2RX
Latest application date: 2013-09-13

FCC ID Device Details

FCC IDSVC-USBDAC2RX
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeSVC
Product CodeUSBDAC2RX
Applicant BusinessLenbrook Industries Limited 🇨🇦
Related Domains lenbrook.com
Equipment ClassWireless USB DAC2
Test FirmSGS-CSTC Standards Technical Services Co.,Ltd.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
5180-5240 MHzOriginal Equipment2013-09-13
2412-2464 MHzOriginal Equipment2013-09-13

Exhibits

DocumentTypeAvailableFile
DAC2 --User Manual--Rev2Users Manual2013-09-13PDF 1.2 MB
DAC2_Internal Photos For RXInternal Photos2013-09-13PDF 316.9 KB
DAC2_External Photos For RXExternal Photos2013-09-13PDF 157.2 KB
Label & Location--RXID Label/Location Info2013-09-13PDF 239.9 KB
DAC2_Test Setup photos For RXTest Setup Photos2013-09-13PDF 127.6 KB
SHEM130300045301V00 FCC Part 15.247 For DTS & RX--Rev2Test Report2013-09-13PDF 1.9 MB
SHEM130300045302V00 FCC Part 15.407 For UII 5.2G & RXTest Report2013-09-13PDF 865.2 KB
Authority DeclarationCover Letter(s)2013-09-13PDF 347.4 KB
FCC --Authority LetterCover Letter(s)2013-09-13PDF 899 KB
FCC-Confidentiality Request LetterCover Letter(s)2013-09-13PDF 28.5 KB
SHEM130300045303V00 FCC MPE For RXRF Exposure Info2013-09-13PDF 132.4 KB

Application Information

Application IDXWQkwm8lYt6sfArlI+ZcrQ==
Final Action Date2013-09-13
Application PurposeOriginal Equipment
Applicant FRN0022583488
Model-USBDAC2RX
Frequency Range5180-5240 MHz
Equipment ClassNII - Unlicensed National Information Infrastructure TX
Device DescriptionWireless USB DAC2
Responsible PartyTaresh Vadgama, Development Team Manager, tvadgama@lenbrook.com , (905) 831-6333
AgentZenger Zenger Zenger, SGS-CSTC Standards Technical Services(Shanghai)Co., zenger.zhang@sgs.com , 86-21-61915664
Technical ContactTaresh Vadgama, Lenbrook Industries Limited, tvadagama@lenbrook.com , 905831
Non-Technical ContactTaresh Vadgama, Lenbrook Industries Limited, tvadagama@lenbrook.com , 905831
Test FirmZenger Zhang, SGS-CSTC Standards Technical Services Co.,Ltd., zenger.zhang@sgs.com , 86(0)2161915654
TCB Emailhotline@acbcert.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsPower Output listed is conducted. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Only the antennas tested in this filing, or similar with equal or lesser gain may be used with the transmitter. This transmitter is restricted to indoor use only within the 5.15-5.25GHz band, enabled for either 2.4 or 5 GHz band of operations as described in this filing. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

Applications

Application IDDatePurpose
XWQkwm8lYt6sfArlI+ZcrQ==2013-09-13Original Equipment
WSzfYWfbq/BuTvuxet/sBQ==2013-09-13Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2412-2464 MHz0.038615CCC
5180-5240 MHz0.007100015ECC
5736-5814 MHz0.009115CCC

Grants

TCB Grant - Application XWQkwm8lYt6sfArlI+ZcrQ==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
Date of Grant: 09/13/2013

Application Dated: 08/20/2013
Lenbrook Industries Limited
633 Granite Court
Pickering, L1W 3K1
Canada
 
Attention: Taresh Vadgama , Development Team Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  SVC-USBDAC2RX
Name of Grantee:  Lenbrook Industries Limited
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Wireless USB DAC2
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5240.0 0.0071  

Power Output listed is conducted. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Only the antennas tested in this filing, or similar with equal or lesser gain may be used with the transmitter. This transmitter is restricted to indoor use only within the 5.15-5.25GHz band, enabled for either 2.4 or 5 GHz band of operations as described in this filing. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application XWQkwm8lYt6sfArlI+ZcrQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Lenbrook Industries Limited
633 Granite Court
Pickering, L1W 3K1
Canada
  Date of Grant: 09/13/2013

Application Dated: 08/20/2013
 
Attention: Taresh Vadgama , Development Team Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  SVC-USBDAC2RX
Name of Grantee:  Lenbrook Industries Limited
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Wireless USB DAC2
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5240.0 0.0071  

Power Output listed is conducted. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Only the antennas tested in this filing, or similar with equal or lesser gain may be used with the transmitter. This transmitter is restricted to indoor use only within the 5.15-5.25GHz band, enabled for either 2.4 or 5 GHz band of operations as described in this filing. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application WSzfYWfbq/BuTvuxet/sBQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
Date of Grant: 09/13/2013

Application Dated: 08/20/2013
Lenbrook Industries Limited
633 Granite Court
Pickering, L1W 3K1
Canada
 
Attention: Taresh Vadgama , Development Team Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  SVC-USBDAC2RX
Name of Grantee:  Lenbrook Industries Limited
Equipment Class: Digital Transmission System
Notes: Wireless USB DAC2
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2464.0 0.0386  
CC 15C 5736.0  -  5814.0 0.0091  

Power Output listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Only the antennas tested in this filing, or similar with equal or lesser gain may be used with the transmitter. This transmitter is enabled for either 2.4 or 5 GHz band of operations as described in this filing. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application WSzfYWfbq/BuTvuxet/sBQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Lenbrook Industries Limited
633 Granite Court
Pickering, L1W 3K1
Canada
  Date of Grant: 09/13/2013

Application Dated: 08/20/2013
 
Attention: Taresh Vadgama , Development Team Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  SVC-USBDAC2RX
Name of Grantee:  Lenbrook Industries Limited
Equipment Class: Digital Transmission System
Notes: Wireless USB DAC2
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2464.0 0.0386  
CC 15C 5736.0  -  5814.0 0.0091  

Power Output listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Only the antennas tested in this filing, or similar with equal or lesser gain may be used with the transmitter. This transmitter is enabled for either 2.4 or 5 GHz band of operations as described in this filing. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

Mail To: