FCC ID SWX-BDBAC
Bullet
by Ubiquiti Inc.
Grantee Code: SWX Product Code: BDBAC
Latest application date: 2019-09-20
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 5255-5340 MHz | Class II permissive change or modification of presently authorized equipment | 2019-09-20 |
| 5150-5250 MHz | Original Equipment | 2018-02-07 |
| 2412-2462 MHz | Original Equipment | 2018-02-07 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| BDBAC quick start guide | Users Manual | 2020-05-13 | PDF 507.5 KB |
| IP67 quick start guide | Users Manual | 2020-05-13 | PDF 1.2 MB |
| User Manual Metadata only | Users Manual | 2020-05-13 | PDF 4 MB |
| B-DB-AC Quick Start Guide | Users Manual | 2020-03-15 | PDF 507.5 KB |
| BulletAC-IP67_QSG | Users Manual | 2020-03-15 | PDF 1.2 MB |
| Bullet_AC_DS REV 2 | Users Manual | 2019-09-20 | PDF 5.2 MB |
| Datasheet | Users Manual | 2019-09-20 | PDF 4.6 MB |
| Quick Start Guide | Users Manual | 2018-08-04 | PDF 4 MB |
| Internal Photos | Internal Photos | 2018-02-07 | PDF 2.9 MB |
| External Photos | External Photos | 2018-02-07 | PDF 4.3 MB |
| Label | ID Label/Location Info | 2018-02-07 | PDF 568.1 KB |
| Label_Label Location | ID Label/Location Info | 2018-02-07 | PDF 568.1 KB |
| Test Setup Photos | Test Setup Photos | 2020-05-13 | PDF 408.1 KB |
| Test Setup Photos | Test Setup Photos | 2020-03-15 | PDF 601.3 KB |
| Annex A_FCC Part 15.407_UNII-2_Rev 4.0 | Test Report | 2019-09-20 | PDF 440.5 KB |
| Annex A_Part 15.407-DFS | Test Report | 2019-09-20 | PDF 141.7 KB |
| Annex A_Part 15.407-UNII-2 | Test Report | 2019-09-20 | PDF 333.5 KB |
| Annex B-1_Part 15.407-UNII-2 | Test Report | 2019-09-20 | PDF 854.4 KB |
| Annex B-2_Part 15.407-UNII-2 | Test Report | 2019-09-20 | PDF 778.4 KB |
| Annex B_Part 15.407-DFS | Test Report | 2019-09-20 | PDF 322.2 KB |
| Annex C_Part 15.407-DFS | Test Report | 2019-09-20 | PDF 468.5 KB |
| Annex C_Part 15.407-UNII-2 | Test Report | 2019-09-20 | PDF 273.1 KB |
| Annex D_Part 15.407-DFS | Test Report | 2019-09-20 | PDF 1.2 MB |
| Annex D_Part 15.407-UNII-2 | Test Report | 2019-09-20 | PDF 699.9 KB |
| Annex E_Part 15.407-UNII-2 | Test Report | 2019-09-20 | PDF 279.9 KB |
| Annex F_Part 15.407-UNII-2 | Test Report | 2019-09-20 | PDF 298.5 KB |
| FCC Part 15.407_DFS Test Report | Test Report | 2019-09-20 | PDF 1.3 MB |
| FCC Part 15.407_UNII-2 Test Report | Test Report | 2019-09-20 | PDF 532.2 KB |
| FCC_Part 15.407 DFS_Rev 4.0.pdf | Test Report | 2019-09-20 | PDF 1 MB |
| FCC_Part 15.407_UNII-2_Rev 10.0 | Test Report | 2019-09-20 | PDF 544.9 KB |
| p1790008_Annex A_FCC Part 15.407_UNII-2_Rev 4.0 | Test Report | 2019-09-20 | PDF 440.5 KB |
| p1790008_FCC_Part 15.407 DFS_Rev 4.0 | Test Report | 2019-09-20 | PDF 1 MB |
| p1790008_FCC_Part 15.407_UNII-2_Rev 10.0 | Test Report | 2019-09-20 | PDF 544.9 KB |
| Annex A_15.407_UNII-1 | Test Report | 2018-02-07 | PDF 593.9 KB |
| Annex A_15.407_UNII-3 | Test Report | 2018-02-07 | PDF 516.5 KB |
| Annex A_FCC Part 15.407_UNII-1 | Test Report | 2018-02-07 | PDF 389.9 KB |
| Annex A_FCC Part 15.407_UNII-3 | Test Report | 2018-02-07 | PDF 311.7 KB |
| Annex A_Part 15.247 | Test Report | 2018-02-07 | PDF 736.6 KB |
| Annex B_15.407_UNII-1 | Test Report | 2018-02-07 | PDF 1.1 MB |
| Annex B_15.407_UNII-3 | Test Report | 2018-02-07 | PDF 1 MB |
| Annex B_FCC Part 15.407_UNII-1 | Test Report | 2018-02-07 | PDF 1.1 MB |
| Annex B_Part 15.247 | Test Report | 2018-02-07 | PDF 420 KB |
| Annex C_15.407_UNII-1 | Test Report | 2018-02-07 | PDF 195 KB |
| Annex C_15.407_UNII-3 | Test Report | 2018-02-07 | PDF 226.3 KB |
| Annex C_Part 15.247 | Test Report | 2018-02-07 | PDF 396.9 KB |
| Annex D_15.407_UNII-1 | Test Report | 2018-02-07 | PDF 418.7 KB |
| Annex D_15.407_UNII-3 | Test Report | 2018-02-07 | PDF 410.4 KB |
| Annex D_Part 15.247 | Test Report | 2018-02-07 | PDF 314.1 KB |
| Annex E_15.407_UNII-1 | Test Report | 2018-02-07 | PDF 200 KB |
| Annex E_15.407_UNII-3 | Test Report | 2018-02-07 | PDF 202.1 KB |
| Annex F_15.407_UNII-1 | Test Report | 2018-02-07 | PDF 267 KB |
| Annex F_15.407_UNII-3 | Test Report | 2018-02-07 | PDF 266.8 KB |
| FCC Part 1.1310 Test Report | RF Exposure Info | 2018-02-07 | PDF 449.6 KB |
| FCC Part 15.247 Test Report | Test Report | 2018-02-07 | PDF 972.6 KB |
| FCC Part 15.407_UNII-1 Test Report | Test Report | 2018-02-07 | PDF 527.6 KB |
| FCC Part 15.407_UNII-3 Test Report | Test Report | 2018-02-07 | PDF 535.1 KB |
| FCC_Part 15.407_UNII-1 | Test Report | 2018-02-07 | PDF 473 KB |
| FCC_Part 15.407_UNII-3 | Test Report | 2018-02-07 | PDF 472.4 KB |
| p1790008_FCC_Part 15.247 | Test Report | 2018-02-07 | PDF 786.1 KB |
| Agent Authorization Letter | Cover Letter(s) | 2019-09-20 | PDF 104.7 KB |
| C2PC Letter | Cover Letter(s) | 2019-09-20 | PDF 83.5 KB |
| Confidentiality Request Letter | Cover Letter(s) | 2019-09-20 | PDF 86.3 KB |
| Professional Installation Instructions | Cover Letter(s) | 2019-09-20 | PDF 51.9 KB |
| Confidentiality Request Letter | Cover Letter(s) | 2018-02-07 | PDF 91.9 KB |
| FCC_Part 1.1310_Rev 3.0.pdf | RF Exposure Info | 2019-09-20 | PDF 493 KB |
| p1790008_FCC_Part 1.1310_Rev 3.0 | RF Exposure Info | 2019-09-20 | PDF 493 KB |
| Block Diagram Metadata only | Block Diagram | PDF 43.3 KB | |
| Schematics Metadata only | Schematics | PDF 597.5 KB | |
| Operational Description Metadata only | Operational Description | PDF 75.3 KB | |
| Operational Description_Rev 5 Metadata only | Operational Description | PDF 165.1 KB | |
| NII Security Exhibit Metadata only | SDR Software/Security Inf | PDF 190.8 KB | |
| UNII Security Exhibit Metadata only | SDR Software/Security Inf | PDF 4.8 MB | |
| BOM Metadata only | Parts List/Tune Up Info | PDF 196.9 KB |
Application Information
| Application ID | iDoja9qMgr511x7e8Ts0oA== |
|---|---|
| Final Action Date | 2019-09-20 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0012268215 |
| Model | BDBAC |
| Frequency Range | 5255-5340 MHz |
| Equipment Class | NII - Unlicensed National Information Infrastructure TX |
| Device Description | Bullet |
| Responsible Party | Mark Feil, Compliance Director, compliance@ui.com  , 385-293-3532 |
| Agent | Michelle Michelle Michelle, Compliance Testing, michelleo@compliancetesting.com  , 4809263100 |
| Test Firm | Michael Schafer, Compliance Testing, LLC, michaels@compliancetesting.com , 480-926-3100 |
| TCB Email | michelleo@compliancetesting.com |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | Yes |
| Short-Term Confidentiality Date | 03/15/2020 |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | Yes |
| Grant Comments | Class II permissive change to add U-NII bands 2A and 2C. Power output listed is conducted. Device operates with specific antennas in Point-to-Point and Point-to-multi Point configurations as described in this filing. This device supports 10 MHz, 20 MHz, 30 MHz and 40 MHz, 50 MHz, 60 MHz and 80 MHz BW modes. The point-to-multi point antenna(s) used with this transmitter must be professionally installed and provide a minimum of 20 cm separation from all persons. The point-to-point antenna(s) used with this transmitter must be professionally installed and provide a minimum of 254.28 cm separation from all persons. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| iDoja9qMgr511x7e8Ts0oA== | 2019-09-20 | Class II permissive change or modification of presently authorized equipment |
| TntUcv/68dqLq3QYidZiVA== | 2018-02-07 | Original Equipment |
| 40KcJ3F9dPEt7DVb9H3Dkg== | 2018-02-07 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application TntUcv/68dqLq3QYidZiVA==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Compliance Testing, LLC 1724 S. Nevada Way Mesa, AZ 85204 |
Date of Grant: 02/07/2018 Application Dated: 02/07/2018 |
| Ubiquiti Inc. |
| 685 Third Avenue |
| New York, NY 10017 |
| Attention: Mark Feil , Compliance Director |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | SWX-BDBAC |
| Name of Grantee: | Ubiquiti Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Bullet |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5150.0 - 5250.0 | 0.141 | ||
| CC | 15E | 5725.0 - 5850.0 | 0.204 |
| Power output listed is conducted. Device operates with specific antennas in a Point-to-Point configuration as described in this filing. This device supports 10MHZ, 20MHz, 30MHz, 40MHz, 50MHz, 60MHz and 80MHz BW modes. The point-to-multi point antenna(s) used with this transmitter must be professionally installed and provide a minimum of 20 cm separation from all persons. The point-to-point antenna(s) used with this transmitter must be professionally installed and provide a minimum of 254.28 cm separation from all persons Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. CC: This device is certified pursuant to two different Part 15 rules sections. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application TntUcv/68dqLq3QYidZiVA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Ubiquiti Inc. 685 Third Avenue New York, NY 10017 United States |
Date of Grant: 02/07/2018 Application Dated: 02/07/2018 |
| Attention: Mark Feil , Compliance Director |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | SWX-BDBAC |
| Name of Grantee: | Ubiquiti Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Bullet |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5150.0 - 5250.0 | 0.141 | ||
| CC | 15E | 5725.0 - 5850.0 | 0.204 |
| Power output listed is conducted. Device operates with specific antennas in a Point-to-Point configuration as described in this filing. This device supports 10MHZ, 20MHz, 30MHz, 40MHz, 50MHz, 60MHz and 80MHz BW modes. The point-to-multi point antenna(s) used with this transmitter must be professionally installed and provide a minimum of 20 cm separation from all persons. The point-to-point antenna(s) used with this transmitter must be professionally installed and provide a minimum of 254.28 cm separation from all persons Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. CC: This device is certified pursuant to two different Part 15 rules sections. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Compliance Testing, LLC 1724 S. Nevada Way Mesa, AZ 85204 |
Date of Grant: 09/20/2019 Application Dated: 04/24/2019 |
| Ubiquiti Inc. |
| 685 Third Avenue |
| New York, NY 10017 |
| Attention: Mark Feil , Compliance Director |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | SWX-BDBAC |
| Name of Grantee: | Ubiquiti Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Bullet |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5255.0 - 5340.0 | 0.144 | ||
| 15E | 5480.0 - 5715.0 | 0.165 |
| Class II permissive change to add U-NII bands 2A and 2C. Power output listed is conducted. Device operates with specific antennas in Point-to-Point and Point-to-multi Point configurations as described in this filing. This device supports 10 MHz, 20 MHz, 30 MHz and 40 MHz, 50 MHz, 60 MHz and 80 MHz BW modes. The point-to-multi point antenna(s) used with this transmitter must be professionally installed and provide a minimum of 20 cm separation from all persons. The point-to-point antenna(s) used with this transmitter must be professionally installed and provide a minimum of 254.28 cm separation from all persons. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application iDoja9qMgr511x7e8Ts0oA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Ubiquiti Inc. 685 Third Avenue New York, NY 10017 United States |
Date of Grant: 09/20/2019 Application Dated: 04/24/2019 |
| Attention: Mark Feil , Compliance Director |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | SWX-BDBAC |
| Name of Grantee: | Ubiquiti Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Bullet |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5255.0 - 5340.0 | 0.144 | ||
| 15E | 5480.0 - 5715.0 | 0.165 |
| Class II permissive change to add U-NII bands 2A and 2C. Power output listed is conducted. Device operates with specific antennas in Point-to-Point and Point-to-multi Point configurations as described in this filing. This device supports 10 MHz, 20 MHz, 30 MHz and 40 MHz, 50 MHz, 60 MHz and 80 MHz BW modes. The point-to-multi point antenna(s) used with this transmitter must be professionally installed and provide a minimum of 20 cm separation from all persons. The point-to-point antenna(s) used with this transmitter must be professionally installed and provide a minimum of 254.28 cm separation from all persons. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Compliance Testing, LLC 1724 S. Nevada Way Mesa, AZ 85204 |
Date of Grant: 02/07/2018 Application Dated: 02/05/2018 |
| Ubiquiti Inc. |
| 685 Third Avenue |
| New York, NY 10017 |
| Attention: Mark Feil , Compliance Director |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | SWX-BDBAC |
| Name of Grantee: | Ubiquiti Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | Bullet |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.074 | ||
| CC | 15C | 2412.0 - 2462.0 | 0.28 |
| Power is listed as conducted. The antenna(s) used with this transmitter must be professionally installed and provide a minimum of 20cm separation from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application 40KcJ3F9dPEt7DVb9H3Dkg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Ubiquiti Inc. 685 Third Avenue New York, NY 10017 United States |
Date of Grant: 02/07/2018 Application Dated: 02/05/2018 |
| Attention: Mark Feil , Compliance Director |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | SWX-BDBAC |
| Name of Grantee: | Ubiquiti Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | Bullet |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.074 | ||
| CC | 15C | 2412.0 - 2462.0 | 0.28 |
| Power is listed as conducted. The antenna(s) used with this transmitter must be professionally installed and provide a minimum of 20cm separation from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: |