FCC ID SWX-M11DB
WiFi Dual Band Module
by Ubiquiti Inc.
Grantee Code: SWX Product Code: M11DB
Latest application date: 2018-06-13
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2412-2462 MHz | Original Equipment | 2018-06-13 |
| 5180-5240 MHz | Original Equipment | 2018-06-13 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| User Manual | Users Manual | 2018-12-10 | PDF 310.1 KB |
| Internal Photos | Internal Photos | 2018-12-10 | PDF 1.7 MB |
| External Photos | External Photos | 2018-12-10 | PDF 206.4 KB |
| Label | ID Label/Location Info | 2018-06-13 | PDF 382.8 KB |
| Label Info | ID Label/Location Info | 2018-06-13 | PDF 382.8 KB |
| Test Setup Photos | Test Setup Photos | 2018-12-10 | PDF 1.5 MB |
| Test Setup Photos DFS | Test Setup Photos | 2018-12-10 | PDF 209.5 KB |
| Test Setup Photos NII | Test Setup Photos | 2018-12-10 | PDF 308.9 KB |
| Test Report DFS | Test Report | 2018-06-13 | PDF 776.5 KB |
| Test Report DTS | Test Report | 2018-06-13 | PDF 2.2 MB |
| Test Report NII | Test Report | 2018-06-13 | PDF 4.3 MB |
| Confidentiality Letter | Cover Letter(s) | 2018-06-13 | PDF 221.9 KB |
| Confidentiality Request Letter | Cover Letter(s) | 2018-06-13 | PDF 221.9 KB |
| DOC Letter | Cover Letter(s) | 2018-06-13 | PDF 252.2 KB |
| DoC Letter | Cover Letter(s) | 2018-06-13 | PDF 252.2 KB |
| MA Cover Letter | Cover Letter(s) | 2018-06-13 | PDF 38.6 KB |
| Modular Approval Cover Letter | Cover Letter(s) | 2018-06-13 | PDF 38.6 KB |
| POA | Cover Letter(s) | 2018-06-13 | PDF 220.8 KB |
| MPE Report | RF Exposure Info | 2018-06-13 | PDF 950.6 KB |
| Block Diagram Metadata only | Block Diagram | PDF 501.4 KB | |
| Schematics Metadata only | Schematics | PDF 540.2 KB | |
| Operational Description Metadata only | Operational Description | PDF 42 KB | |
| Operational Description Software Security Metadata only | SDR Software/Security Inf | PDF 59 KB |
Application Information
| Application ID | QOUGQRoKdF5Ayfkf+PWz4g== |
|---|---|
| Final Action Date | 2018-06-13 |
| Application Purpose | Original Equipment |
| Applicant FRN | 0012268215 |
| Model | M11DB |
| Frequency Range | 2412-2462 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | WiFi Dual Band Module |
| Responsible Party | Mark Feil, Compliance Director, compliance@ui.com  , 385-293-3532 |
| Test Firm | Alex Chen, SPORTON International Inc., alex@sporton.com.tw  , 886-3-327-3456 |
| TCB Email | tei@timcoengr.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | Yes |
| Short-Term Confidentiality Date | 12/10/2018 |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Single Modular Approval. Power listed is conducted. Professional installation is required. This module is restricted to installation in products for use only in mobile and fixed applications. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Grantee is responsible for providing specific testing instructions to host manufacturers for additional testing to verify compliance as a composite system. This includes retesting of transmitter module per part 15.31(h) and (k). |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| QOUGQRoKdF5Ayfkf+PWz4g== | 2018-06-13 | Original Equipment |
| 0x8kNnAYV6vJxN1MS+3L0g== | 2018-06-13 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application QOUGQRoKdF5Ayfkf+PWz4g==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 06/13/2018 Application Dated: 06/12/2018 |
| Ubiquiti Inc. |
| 685 Third Avenue |
| New York, NY 10017 |
| Attention: Mark Feil , Compliance Director |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | SWX-M11DB |
| Name of Grantee: | Ubiquiti Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | WiFi Dual Band Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.6281 |
| Single Modular Approval. Power listed is conducted. Professional installation is required. This module is restricted to installation in products for use only in mobile and fixed applications. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Grantee is responsible for providing specific testing instructions to host manufacturers for additional testing to verify compliance as a composite system. This includes retesting of transmitter module per part 15.31(h) and (k). |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application QOUGQRoKdF5Ayfkf+PWz4g==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Ubiquiti Inc. 685 Third Avenue New York, NY 10017 United States |
Date of Grant: 06/13/2018 Application Dated: 06/12/2018 |
| Attention: Mark Feil , Compliance Director |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | SWX-M11DB |
| Name of Grantee: | Ubiquiti Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | WiFi Dual Band Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.6281 |
| Single Modular Approval. Power listed is conducted. Professional installation is required. This module is restricted to installation in products for use only in mobile and fixed applications. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Grantee is responsible for providing specific testing instructions to host manufacturers for additional testing to verify compliance as a composite system. This includes retesting of transmitter module per part 15.31(h) and (k). |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 06/13/2018 Application Dated: 06/12/2018 |
| Ubiquiti Inc. |
| 685 Third Avenue |
| New York, NY 10017 |
| Attention: Mark Feil , Compliance Director |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | SWX-M11DB |
| Name of Grantee: | Ubiquiti Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | WiFi Dual Band Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5240.0 | 0.03908 | ||
| CC | 15E | 5260.0 - 5320.0 | 0.03899 | ||
| CC | 15E | 5500.0 - 5720.0 | 0.03926 | ||
| CC | 15E | 5745.0 - 5825.0 | 0.03784 |
| Single Modular Approval. Power listed is conducted. Professional installation is required. This module is restricted to installation in products for use only in mobile and fixed applications. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Grantee is responsible for providing specific testing instructions to host manufacturers for additional testing to verify compliance as a composite system. This includes retesting of transmitter module per part 15.31(h) and (k). |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application 0x8kNnAYV6vJxN1MS+3L0g==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Ubiquiti Inc. 685 Third Avenue New York, NY 10017 United States |
Date of Grant: 06/13/2018 Application Dated: 06/12/2018 |
| Attention: Mark Feil , Compliance Director |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | SWX-M11DB |
| Name of Grantee: | Ubiquiti Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | WiFi Dual Band Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5240.0 | 0.03908 | ||
| CC | 15E | 5260.0 - 5320.0 | 0.03899 | ||
| CC | 15E | 5500.0 - 5720.0 | 0.03926 | ||
| CC | 15E | 5745.0 - 5825.0 | 0.03784 |
| Single Modular Approval. Power listed is conducted. Professional installation is required. This module is restricted to installation in products for use only in mobile and fixed applications. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Grantee is responsible for providing specific testing instructions to host manufacturers for additional testing to verify compliance as a composite system. This includes retesting of transmitter module per part 15.31(h) and (k). |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: |