FCC ID SWX-M2BW
BULLET M2
by Ubiquiti Inc.
Grantee Code: SWX Product Code: M2BW
Latest application date: 2018-02-27
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2018-02-27 |
| 2412-2462 MHz | Original Equipment | 2018-01-30 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| User Manual BM2-Ti | Users Manual | 2018-08-26 | PDF 2.3 MB |
| User Manual BulletM2-HP | Users Manual | 2018-08-26 | PDF 1.8 MB |
| User Manual BM2-Ti | Users Manual | 2018-07-29 | PDF 1.9 MB |
| User Manual BulletM2-HP | Users Manual | 2018-07-29 | PDF 2.2 MB |
| Internal Photos | Internal Photos | 2018-08-26 | PDF 1.5 MB |
| External Photos | External Photos | 2018-08-26 | PDF 1.7 MB |
| Label Info BM2-Ti | ID Label/Location Info | 2018-01-30 | PDF 117.7 KB |
| Label Info BulletM2-HP | ID Label/Location Info | 2018-01-30 | PDF 107 KB |
| Test Setup Photos DTS WLAN | Test Setup Photos | 2018-08-26 | PDF 1.3 MB |
| Test Setup Photos DTS WLAN | Test Setup Photos | 2018-07-29 | PDF 647.7 KB |
| Test Report DTS WLAN Part 1 | Test Report | 2018-02-27 | PDF 4.9 MB |
| Test Report DTS WLAN Part 2 | Test Report | 2018-02-27 | PDF 4.9 MB |
| Test Report DTS WLAN Part 3 | Test Report | 2018-02-27 | PDF 4.9 MB |
| Test Report DTS WLAN Part 4 | Test Report | 2018-02-27 | PDF 4.9 MB |
| Test Report DTS WLAN Part 5 | Test Report | 2018-02-27 | PDF 4.9 MB |
| Test Report DTS WLAN Part 6 | Test Report | 2018-02-27 | PDF 5 MB |
| Test Report DTS WLAN Part 7 | Test Report | 2018-02-27 | PDF 5 MB |
| Test Report DTS WLAN Part 8 | Test Report | 2018-02-27 | PDF 5 MB |
| Test Report DTS WLAN Part 9 | Test Report | 2018-02-27 | PDF 3.4 MB |
| Test Report RFExp | RF Exposure Info | 2018-02-27 | PDF 321 KB |
| Test Report DTS WLAN Part 1 | Test Report | 2018-01-30 | PDF 5.5 MB |
| Test Report DTS WLAN Part 2 | Test Report | 2018-01-30 | PDF 5.5 MB |
| Class II Permissive Change | Cover Letter(s) | 2018-02-27 | PDF 569.1 KB |
| Confidentiality Request LTC STC | Cover Letter(s) | 2018-02-27 | PDF 360.9 KB |
| POA | Cover Letter(s) | 2018-02-27 | PDF 88.1 KB |
| Professional Installation Declaration | Cover Letter(s) | 2018-02-27 | PDF 53.6 KB |
| Confidentiality Request Letter | Cover Letter(s) | 2018-01-30 | PDF 93.1 KB |
| Declaration of function disabled (ch12&13) | Cover Letter(s) | 2018-01-30 | PDF 85.1 KB |
| POA | Cover Letter(s) | 2018-01-30 | PDF 88.1 KB |
| RF Exposure | RF Exposure Info | 2018-01-30 | PDF 319.1 KB |
| Block Diagram Metadata only | Block Diagram | PDF 29.8 KB | |
| Schematics Metadata only | Schematics | PDF 200.7 KB | |
| Antenna Specification OpDes Metadata only | Operational Description | PDF 1.2 MB | |
| Operational Decription Metadata only | Operational Description | PDF 45.7 KB | |
| Operational Description Metadata only | Operational Description | PDF 267.5 KB | |
| Parts List Metadata only | Parts List/Tune Up Info | PDF 26 KB | |
| Tune Up Metadata only | Parts List/Tune Up Info | PDF 50.8 KB | |
| Tune-Up Procedure Metadata only | Parts List/Tune Up Info | PDF 50 KB |
Application Information
| Application ID | aPcoVWJVacQ/CoY28SJ6Nw== |
|---|---|
| Final Action Date | 2018-02-27 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0012268215 |
| Model | M2BW |
| Frequency Range | 2412-2462 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | BULLET M2 |
| Responsible Party | Mark Feil, Compliance Director, compliance@ui.com  , 385-293-3532 |
| Test Firm | Alex Chen, SPORTON International Inc., alex@sporton.com.tw  , 886-3-327-3456 |
| TCB Email | TEI@TIMCOENGR.COM  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | Yes |
| Short-Term Confidentiality Date | 08/26/2018 |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Class II Permissive Change. The following antennas were added to this device: AMO-2G10, Omni Antenna, 10 dBi gain; AMO-2G13, Omni Antenna, 13 dBi gain; AM-V2G-Ti, Sector Antenna, 15-17 dBi gain; RD-2G24, Dish Antenna, 24 dBi gain Power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has been designed to operate with an antenna having a maximum gain of 4 dBi. This device has 5, 8, 10, 20, 30, and 40 MHz bandwidth modes. Ubiquiti radio devices must be professionally installed. Shielded Ethernet cable and earth grounding must be used as conditions of product warranty. TOUGHCable is designed for outdoor installations. It is the professional installers responsibility to follow local country regulations, including operation within legal frequency channels, and output power requirements. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| aPcoVWJVacQ/CoY28SJ6Nw== | 2018-02-27 | Class II permissive change or modification of presently authorized equipment |
| Pmyj/tAR61KnGfAlEoiXOA== | 2018-01-30 | Original Equipment |
Equipment Authorization
| Frequency | Output | Rules |
|---|---|---|
| 2412-2462 MHz | 0.9817000 | 15C |
Grants
TCB Grant - Application Pmyj/tAR61KnGfAlEoiXOA==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 01/30/2018 Application Dated: 01/26/2018 |
| Ubiquiti Inc. |
| 685 Third Avenue |
| New York, NY 10017 |
| Attention: Mark Feil , Compliance Director |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | SWX-M2BW |
| Name of Grantee: | Ubiquiti Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | BULLET M2 |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.9817 |
| Power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has been designed to operate with an antenna having a maximum gain of 4 dBi. This device has 5, 8, 10, 20, 30, and 40 MHz bandwidth modes. Ubiquiti radio devices must be professionally installed. Shielded Ethernet cable and earth grounding must be used as conditions of product warranty. TOUGHCable is designed for outdoor installations. It is the professional installers responsibility to follow local country regulations, including operation within legal frequency channels, and output power requirements. |
EAS Grant - Application Pmyj/tAR61KnGfAlEoiXOA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Ubiquiti Inc. 685 Third Avenue New York, NY 10017 United States |
Date of Grant: 01/30/2018 Application Dated: 01/26/2018 |
| Attention: Mark Feil , Compliance Director |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | SWX-M2BW |
| Name of Grantee: | Ubiquiti Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | BULLET M2 |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.9817 |
| Power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has been designed to operate with an antenna having a maximum gain of 4 dBi. This device has 5, 8, 10, 20, 30, and 40 MHz bandwidth modes. Ubiquiti radio devices must be professionally installed. Shielded Ethernet cable and earth grounding must be used as conditions of product warranty. TOUGHCable is designed for outdoor installations. It is the professional installers responsibility to follow local country regulations, including operation within legal frequency channels, and output power requirements. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 02/27/2018 Application Dated: 02/23/2018 |
| Ubiquiti Inc. |
| 685 Third Avenue |
| New York, NY 10017 |
| Attention: Mark Feil , Compliance Director |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | SWX-M2BW |
| Name of Grantee: | Ubiquiti Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | BULLET M2 |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.9817 |
| Class II Permissive Change. The following antennas were added to this device: AMO-2G10, Omni Antenna, 10 dBi gain; AMO-2G13, Omni Antenna, 13 dBi gain; AM-V2G-Ti, Sector Antenna, 15-17 dBi gain; RD-2G24, Dish Antenna, 24 dBi gain Power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has been designed to operate with an antenna having a maximum gain of 4 dBi. This device has 5, 8, 10, 20, 30, and 40 MHz bandwidth modes. Ubiquiti radio devices must be professionally installed. Shielded Ethernet cable and earth grounding must be used as conditions of product warranty. TOUGHCable is designed for outdoor installations. It is the professional installers responsibility to follow local country regulations, including operation within legal frequency channels, and output power requirements. |
EAS Grant - Application aPcoVWJVacQ/CoY28SJ6Nw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Ubiquiti Inc. 685 Third Avenue New York, NY 10017 United States |
Date of Grant: 02/27/2018 Application Dated: 02/23/2018 |
| Attention: Mark Feil , Compliance Director |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | SWX-M2BW |
| Name of Grantee: | Ubiquiti Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | BULLET M2 |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.9817 |
| Class II Permissive Change. The following antennas were added to this device: AMO-2G10, Omni Antenna, 10 dBi gain; AMO-2G13, Omni Antenna, 13 dBi gain; AM-V2G-Ti, Sector Antenna, 15-17 dBi gain; RD-2G24, Dish Antenna, 24 dBi gain Power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has been designed to operate with an antenna having a maximum gain of 4 dBi. This device has 5, 8, 10, 20, 30, and 40 MHz bandwidth modes. Ubiquiti radio devices must be professionally installed. Shielded Ethernet cable and earth grounding must be used as conditions of product warranty. TOUGHCable is designed for outdoor installations. It is the professional installers responsibility to follow local country regulations, including operation within legal frequency channels, and output power requirements. |
| Mail To: |