FCC ID SWX-NBE5M19

Access Point

by Ubiquiti Inc.

Grantee Code: SWX   Product Code: NBE5M19
Latest application date: 2015-09-17

FCC ID Device Details

FCC IDSWX-NBE5M19
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeSWX
Product CodeNBE5M19
Applicant BusinessUbiquiti Inc. 🇺🇸
Related Domains ui.com
Equipment ClassAccess Point
Test FirmCompliance Testing, LLC

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
5255-5340 MHzClass II permissive change or modification of presently authorized equipment2015-09-17
5160-5230 MHzOriginal Equipment2015-08-04

Exhibits

DocumentTypeAvailableFile
ManualUsers Manual2015-09-18PDF 3.3 MB
ManualUsers Manual2015-09-17PDF 3.3 MB
Internal PhotosInternal Photos2015-09-18PDF 460.9 KB
External PhotosExternal Photos2015-09-18PDF 513.4 KB
Label and LocationID Label/Location Info2015-08-04PDF 518 KB
Test Setup PhotosTest Setup Photos2015-09-18PDF 965.8 KB
Annex ATest Report2015-09-17PDF 1.8 MB
Annex A DFSTest Report2015-09-17PDF 154.3 KB
Annex BTest Report2015-09-17PDF 398.7 KB
Annex B DFSTest Report2015-09-17PDF 81.9 KB
Annex CTest Report2015-09-17PDF 996.1 KB
Annex C DFSTest Report2015-09-17PDF 103.9 KB
Annex DTest Report2015-09-17PDF 161.5 KB
Annex D DFSTest Report2015-09-17PDF 144.5 KB
Annex ETest Report2015-09-17PDF 201.4 KB
Part 15.407Test Report2015-09-17PDF 561.7 KB
Part 15.407 DFSTest Report2015-09-17PDF 849.9 KB
Annex A UNII-1Test Report2015-08-04PDF 981.4 KB
Annex A UNII-3Test Report2015-08-04PDF 1 MB
Annex B UNII-1Test Report2015-08-04PDF 304.7 KB
Annex B UNII-3Test Report2015-08-04PDF 215.6 KB
Annex C UNII-1Test Report2015-08-04PDF 505.7 KB
Annex C UNII-3Test Report2015-08-04PDF 510 KB
Annex D UNII-1Test Report2015-08-04PDF 89.4 KB
Annex D UNII-3Test Report2015-08-04PDF 90.5 KB
Annex E UNII-1Test Report2015-08-04PDF 201.4 KB
Annex E UNII-3Test Report2015-08-04PDF 201.4 KB
Part 15.407 UNII-1Test Report2015-08-04PDF 523.6 KB
Part 15.407 UNII-3Test Report2015-08-04PDF 517.7 KB
AttestationAttestation Statements2015-09-17PDF 91.4 KB
C2pc LetterCover Letter(s)2015-09-17PDF 88 KB
Agent AuthCover Letter(s)2015-08-04PDF 33.3 KB
Antenna InfoCover Letter(s)2015-08-04PDF 87.2 KB
CorrespondenceCover Letter(s)2015-08-04PDF 97.1 KB
Long Term ConfidentialityCover Letter(s)2015-08-04PDF 81.2 KB
Short Term ConfidentialityCover Letter(s)2015-08-04PDF 71 KB
Part 1.1310RF Exposure Info2015-09-17PDF 273.9 KB
Part 1.1310 UNII-1RF Exposure Info2015-08-04PDF 329 KB
Part 1.1310 UNII-3RF Exposure Info2015-08-04PDF 328.9 KB
BLock Diagram Metadata onlyBlock DiagramPDF 7.2 KB
Schematics Metadata onlySchematicsPDF 244.7 KB
Theory of Op Metadata onlyOperational DescriptionPDF 76.3 KB
Security Info Metadata onlySDR Software/Security InfPDF 214.1 KB
BOM Metadata onlyParts List/Tune Up InfoPDF 65.1 KB

Application Information

Application IDx7a25SLmwF74BXUES5SVRQ==
Final Action Date2015-09-17
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0012268215
ModelNBE5M19
Frequency Range5255-5340 MHz
Equipment ClassNII - Unlicensed National Information Infrastructure TX
Device DescriptionAccess Point
Responsible PartyMark Feil, Compliance Director, compliance@ui.com , 385-293-3532
Test FirmMichael Schafer, Compliance Testing, LLC, michaels@compliancetesting.com , 480-926-3100
TCB Emaildianaw@compliancetesting.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityNo
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceNo
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryYes
Grant CommentsClass II permissive change to add DFS bands. Power output listed is aggregate conducted. Device operates with specific antennas in a Point-to-Point, 2 x 2 MIMO configuration as described in this filing. This device supports 10MHZ, 20MHz, 30MHz, 40MHz, 50MHz, 60MHz and 80MHz BW modes. The antenna(s) used with this transmitter must be professionally installed and provide a minimum of 113cm separation from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

Applications

Application IDDatePurpose
x7a25SLmwF74BXUES5SVRQ==2015-09-17Class II permissive change or modification of presently authorized equipment
BUmwz+01I/kPBv6CayQXdA==2015-08-04Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
5160-5230 MHz0.38915E38, MO
5255-5340 MHz0.01215E38, MO
5480-5715 MHz0.01215E38, MO
5735-5840 MHz0.30115E38, MO

Grants

TCB Grant - Application x7a25SLmwF74BXUES5SVRQ==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Compliance Testing, LLC
1724 S. Nevada Way
Mesa, AZ 85204
Date of Grant: 09/17/2015

Application Dated: 08/29/2015
Ubiquiti Inc.
685 Third Avenue
New York, NY 10017
 
Attention: Mark Feil , Compliance Director

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  SWX-NBE5M19
Name of Grantee:  Ubiquiti Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Access Point
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 MO 15E 5255.0  -  5340.0 0.012  
38 MO 15E 5480.0  -  5715.0 0.012  

Class II permissive change to add DFS bands. Power output listed is aggregate conducted. Device operates with specific antennas in a Point-to-Point, 2 x 2 MIMO configuration as described in this filing.

This device supports 10MHZ, 20MHz, 30MHz, 40MHz, 50MHz, 60MHz and 80MHz BW modes. The antenna(s) used with this transmitter must be professionally installed and provide a minimum of 113cm separation from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.


38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application x7a25SLmwF74BXUES5SVRQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Ubiquiti Inc.
685 Third Avenue
New York, NY 10017
United States
  Date of Grant: 09/17/2015

Application Dated: 08/29/2015
 
Attention: Mark Feil , Compliance Director

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  SWX-NBE5M19
Name of Grantee:  Ubiquiti Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Access Point
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 MO 15E 5255.0  -  5340.0 0.012  
38 MO 15E 5480.0  -  5715.0 0.012  

Class II permissive change to add DFS bands. Power output listed is aggregate conducted. Device operates with specific antennas in a Point-to-Point, 2 x 2 MIMO configuration as described in this filing.

This device supports 10MHZ, 20MHz, 30MHz, 40MHz, 50MHz, 60MHz and 80MHz BW modes. The antenna(s) used with this transmitter must be professionally installed and provide a minimum of 113cm separation from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.


38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application BUmwz+01I/kPBv6CayQXdA==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Compliance Testing, LLC
1724 S. Nevada Way
Mesa, AZ 85204
Date of Grant: 08/04/2015

Application Dated: 08/04/2015
Ubiquiti Inc.
685 Third Avenue
New York, NY 10017
 
Attention: Mark Feil , Compliance Director

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  SWX-NBE5M19
Name of Grantee:  Ubiquiti Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Access Point
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 MO 15E 5160.0  -  5230.0 0.389  
38 MO 15E 5735.0  -  5840.0 0.301  

Power output listed is aggregate conducted. Device operates in a 2 x 2 MIMO configuration with specific antennas for Point-to-Point and Point-to-Multipoint applications as described in this filing.

This device supports 10 MHZ, 20 MHz, 30 MHz and 40 MHz BW modes. The antenna(s) used with this transmitter must be professionally installed and provide a minimum of 50cm separation from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.


38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application BUmwz+01I/kPBv6CayQXdA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Ubiquiti Inc.
685 Third Avenue
New York, NY 10017
United States
  Date of Grant: 08/04/2015

Application Dated: 08/04/2015
 
Attention: Mark Feil , Compliance Director

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  SWX-NBE5M19
Name of Grantee:  Ubiquiti Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Access Point
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 MO 15E 5160.0  -  5230.0 0.389  
38 MO 15E 5735.0  -  5840.0 0.301  

Power output listed is aggregate conducted. Device operates in a 2 x 2 MIMO configuration with specific antennas for Point-to-Point and Point-to-Multipoint applications as described in this filing.

This device supports 10 MHZ, 20 MHz, 30 MHz and 40 MHz BW modes. The antenna(s) used with this transmitter must be professionally installed and provide a minimum of 50cm separation from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.


38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

Mail To: