FCC ID SWX-NS5AC

NanoStation AC

by Ubiquiti Inc.

Grantee Code: SWX   Product Code: NS5AC
Latest application date: 2018-02-01

FCC ID Device Details

FCC IDSWX-NS5AC
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeSWX
Product CodeNS5AC
Applicant BusinessUbiquiti Inc. 🇺🇸
Related Domains ui.com
Equipment ClassNanoStation AC
Test FirmSPORTON International Inc.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
5160-5245 MHzClass II permissive change or modification of presently authorized equipment2018-02-01
2412-2462 MHzOriginal Equipment2017-11-01
5160-5245 MHzOriginal Equipment2017-11-01

Exhibits

DocumentTypeAvailableFile
User ManualUsers Manual2018-07-31PDF 2.6 MB
User ManualUsers Manual2018-04-30PDF 2.5 MB
Internal PhotoInternal Photos2018-04-30PDF 1.1 MB
Internal PhotosInternal Photos2018-04-30PDF 1.1 MB
External PhotoExternal Photos2018-04-30PDF 310.5 KB
External PhotosExternal Photos2018-04-30PDF 310.5 KB
LabelID Label/Location Info2017-11-01PDF 807.2 KB
Test Setup Photos DFS ClientTest Setup Photos2018-07-31PDF 176.4 KB
Test Setup Photos DFS MasterTest Setup Photos2018-07-31PDF 173.4 KB
Test Setup Photos MPETest Setup Photos2018-07-31PDF 377.8 KB
Test Setup Photos NIITest Setup Photos2018-07-31PDF 194.6 KB
Test Setup Photo DTSTest Setup Photos2018-04-30PDF 676.1 KB
Test Setup Photo MPETest Setup Photos2018-04-30PDF 377 KB
Test Setup Photo NIITest Setup Photos2018-04-30PDF 689.3 KB
Test Report DFS ClientTest Report2018-02-01PDF 739.9 KB
Test Report DFS MasterTest Report2018-02-01PDF 2.8 MB
Test Report NIITest Report2018-02-01PDF 4.1 MB
Test Report DTSTest Report2017-11-01PDF 3.1 MB
Test Report NIITest Report2017-11-01PDF 5.2 MB
C2PCCover Letter(s)2018-02-01PDF 298.8 KB
Confidentiality RequestCover Letter(s)2018-02-01PDF 300 KB
POACover Letter(s)2018-02-01PDF 299.2 KB
Confidentiality Request LetterCover Letter(s)2017-11-01PDF 314.8 KB
POACover Letter(s)2017-11-01PDF 313.7 KB
MPERF Exposure Info2018-02-01PDF 1.3 MB
MPE ReportRF Exposure Info2017-11-01PDF 1.3 MB
Block Diagram Metadata onlyBlock DiagramPDF 51.9 KB
Schematcis Metadata onlySchematicsPDF 450.3 KB
Schematics Metadata onlySchematicsPDF 450.3 KB
OpDes Expidite Review Required Metadata onlyOperational DescriptionPDF 45.2 KB
Operational Description Metadata onlyOperational DescriptionPDF 379.1 KB
Operational Description Metadata onlyOperational DescriptionPDF 273.5 KB
Operational Description Software Security Metadata onlySDR Software/Security InfPDF 33.2 KB
OpDes SW Metadata onlySDR Software/Security InfPDF 33.6 KB

Application Information

Application IDH1PEvZaetz/JadzR5ba5iQ==
Final Action Date2018-02-01
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0012268215
ModelNS5AC
Frequency Range5160-5245 MHz
Equipment ClassNII - Unlicensed National Information Infrastructure TX
Device DescriptionNanoStation AC
Responsible PartyMark Feil, Compliance Director, compliance@ui.com , 385-293-3532
Test FirmAlex Chen, SPORTON International Inc., alex@sporton.com.tw , 886-3-327-3456
TCB EmailTEI@TIMCOENGR.COM
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityYes
Short-Term Confidentiality Date07/31/2018
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryYes
Grant CommentsPower listed is maximum combined output power conducted. Device operates with specific antennas in MIMO configurations as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 33 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 10, 20, 30, 40, 50, 60, and 80 MHz bandwidth modes.Ubiquiti radio devices must be professionally installed. Shielded Ethernet cable and earth grounding must be used as conditions of product warranty. TOUGHCable™ is designed for outdoor installations. It is the professional installer’s responsibility to follow local country regulations, including operation within legal frequency channels, output power, and Dynamic Frequency Selection (DFS) requirements.

Applications

Application IDDatePurpose
H1PEvZaetz/JadzR5ba5iQ==2018-02-01Class II permissive change or modification of presently authorized equipment
STKWR2m6QQm6950h+PgSng==2017-11-01Original Equipment
MYkeIhVi2Vx4ziYfNZLXLw==2017-11-01Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2412-2462 MHz0.054300015CCC
5160-5245 MHz0.314815ECC, MO
5160-5245 MHz0.314815E38, CC, MO
5255-5340 MHz0.024915ECC, MO
5480-5715 MHz0.024615ECC, MO
5735-5840 MHz0.314115E38, CC, MO
5735-5840 MHz0.314115ECC, MO

Grants

TCB Grant - Application STKWR2m6QQm6950h+PgSng==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669
Date of Grant: 11/01/2017

Application Dated: 10/31/2017
Ubiquiti Inc.
685 Third Avenue
New York, NY 10017
 
Attention: Mark Feil , Compliance Director

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  SWX-NS5AC
Name of Grantee:  Ubiquiti Inc.
Equipment Class: Digital Transmission System
Notes: NanoStation AC
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.0543  

Power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 33 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20 and 40 MHz bandwidth modes. Ubiquiti radio devices must be professionally installed. Shielded Ethernet cable and earth grounding must be used as conditions of product warranty. TOUGHCable™ is designed for outdoor installations. It is the professional installer’s responsibility to follow local country regulations, including operation within legal frequency channels, output power, and Dynamic Frequency Selection (DFS) requirements.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application STKWR2m6QQm6950h+PgSng==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Ubiquiti Inc.
685 Third Avenue
New York, NY 10017
United States
  Date of Grant: 11/01/2017

Application Dated: 10/31/2017
 
Attention: Mark Feil , Compliance Director

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  SWX-NS5AC
Name of Grantee:  Ubiquiti Inc.
Equipment Class: Digital Transmission System
Notes: NanoStation AC
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.0543  

Power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 33 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20 and 40 MHz bandwidth modes. Ubiquiti radio devices must be professionally installed. Shielded Ethernet cable and earth grounding must be used as conditions of product warranty. TOUGHCable™ is designed for outdoor installations. It is the professional installer’s responsibility to follow local country regulations, including operation within legal frequency channels, output power, and Dynamic Frequency Selection (DFS) requirements.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application MYkeIhVi2Vx4ziYfNZLXLw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669
Date of Grant: 11/01/2017

Application Dated: 10/31/2017
Ubiquiti Inc.
685 Third Avenue
New York, NY 10017
 
Attention: Mark Feil , Compliance Director

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  SWX-NS5AC
Name of Grantee:  Ubiquiti Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: NanoStation AC
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC MO 15E 5160.0  -  5245.0 0.3148  
38 CC MO 15E 5735.0  -  5840.0 0.3141  

Power listed is maximum combined output power conducted. Device operates with specific antennas in MIMO configurations as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 33 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 10, 20, 30, 40, 50, 60, and 80 MHz bandwidth modes.Ubiquiti radio devices must be professionally installed. Shielded Ethernet cable and earth grounding must be used as conditions of product warranty. TOUGHCable™ is designed for outdoor installations. It is the professional installer’s responsibility to follow local country regulations, including operation within legal frequency channels, output power, and Dynamic Frequency Selection (DFS) requirements.

38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application MYkeIhVi2Vx4ziYfNZLXLw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Ubiquiti Inc.
685 Third Avenue
New York, NY 10017
United States
  Date of Grant: 11/01/2017

Application Dated: 10/31/2017
 
Attention: Mark Feil , Compliance Director

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  SWX-NS5AC
Name of Grantee:  Ubiquiti Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: NanoStation AC
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC MO 15E 5160.0  -  5245.0 0.3148  
38 CC MO 15E 5735.0  -  5840.0 0.3141  

Power listed is maximum combined output power conducted. Device operates with specific antennas in MIMO configurations as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 33 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 10, 20, 30, 40, 50, 60, and 80 MHz bandwidth modes.Ubiquiti radio devices must be professionally installed. Shielded Ethernet cable and earth grounding must be used as conditions of product warranty. TOUGHCable™ is designed for outdoor installations. It is the professional installer’s responsibility to follow local country regulations, including operation within legal frequency channels, output power, and Dynamic Frequency Selection (DFS) requirements.


38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application H1PEvZaetz/JadzR5ba5iQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669
Date of Grant: 02/01/2018

Application Dated: 11/28/2017
Ubiquiti Inc.
685 Third Avenue
New York, NY 10017
 
Attention: Mark Feil , Compliance Director

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  SWX-NS5AC
Name of Grantee:  Ubiquiti Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: NanoStation AC
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5160.0  -  5245.0 0.3148  
CC MO 15E 5255.0  -  5340.0 0.0249  
CC MO 15E 5480.0  -  5715.0 0.0246  
CC MO 15E 5735.0  -  5840.0 0.3141  

Power listed is maximum combined output power conducted. Device operates with specific antennas in MIMO configurations as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 33 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 10, 20, 30, 40, 50, 60, and 80 MHz bandwidth modes.Ubiquiti radio devices must be professionally installed. Shielded Ethernet cable and earth grounding must be used as conditions of product warranty. TOUGHCable™ is designed for outdoor installations. It is the professional installer’s responsibility to follow local country regulations, including operation within legal frequency channels, output power, and Dynamic Frequency Selection (DFS) requirements.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application H1PEvZaetz/JadzR5ba5iQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Ubiquiti Inc.
685 Third Avenue
New York, NY 10017
United States
  Date of Grant: 02/01/2018

Application Dated: 11/28/2017
 
Attention: Mark Feil , Compliance Director

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  SWX-NS5AC
Name of Grantee:  Ubiquiti Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: NanoStation AC
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5160.0  -  5245.0 0.3148  
CC MO 15E 5255.0  -  5340.0 0.0249  
CC MO 15E 5480.0  -  5715.0 0.0246  
CC MO 15E 5735.0  -  5840.0 0.3141  

Power listed is maximum combined output power conducted. Device operates with specific antennas in MIMO configurations as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 33 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 10, 20, 30, 40, 50, 60, and 80 MHz bandwidth modes.Ubiquiti radio devices must be professionally installed. Shielded Ethernet cable and earth grounding must be used as conditions of product warranty. TOUGHCable™ is designed for outdoor installations. It is the professional installer’s responsibility to follow local country regulations, including operation within legal frequency channels, output power, and Dynamic Frequency Selection (DFS) requirements.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

Mail To: