FCC ID SWX-PBE5AC
PowerBeam 5AC
by Ubiquiti Inc.
Grantee Code: SWX Product Code: PBE5AC
Latest application date: 2016-12-01
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 5165-5245 MHz | Class II permissive change or modification of presently authorized equipment | 2016-12-01 |
| 5255-5340 MHz | Class II permissive change or modification of presently authorized equipment | 2015-09-15 |
| 5165-5245 MHz | Original Equipment | 2015-05-22 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| PBE-5AC-Omni | Users Manual | 2016-12-01 | PDF 2.7 MB |
| PBE-5AC300 User Manual | Users Manual | 2016-12-01 | PDF 2.7 MB |
| PBE-5AC400 User Manual | Users Manual | 2016-12-01 | PDF 3.2 MB |
| PBE-5AC500 User Manual | Users Manual | 2016-12-01 | PDF 5.1 MB |
| PBE-5AC620 User Manual Part 1 of 2 | Users Manual | 2016-12-01 | PDF 6 MB |
| PBE-5AC620 User Manual Part 2 of 2 | Users Manual | 2016-12-01 | PDF 976.2 KB |
| UNII-2 300 | Users Manual | 2015-09-15 | PDF 2.9 MB |
| UNII-2 400 | Users Manual | 2015-09-15 | PDF 3.1 MB |
| UNII-2 500 | Users Manual | 2015-09-15 | PDF 3.2 MB |
| UNII-2 620 part 1 of 4 | Users Manual | 2015-09-15 | PDF 3.6 MB |
| UNII-2 620 part 2 of 4 | Users Manual | 2015-09-15 | PDF 3.5 MB |
| UNII-2 620 part 3 of 4 | Users Manual | 2015-09-15 | PDF 149.2 KB |
| UNII-2 620 part 4 of 4 | Users Manual | 2015-09-15 | PDF 106.3 KB |
| UNII-2 Omni | Users Manual | 2015-09-15 | PDF 2.7 MB |
| Manual 300 | Users Manual | 2015-07-06 | PDF 2.8 MB |
| Manual 400 | Users Manual | 2015-07-06 | PDF 3 MB |
| Manual 500 | Users Manual | 2015-07-06 | PDF 3 MB |
| Manual 620 pt1 | Users Manual | 2015-07-06 | PDF 3.4 MB |
| Manual 620 pt2 | Users Manual | 2015-07-06 | PDF 3.8 MB |
| Manual 620 pt3 | Users Manual | 2015-07-06 | PDF 140.9 KB |
| Manual 620 pt4 | Users Manual | 2015-07-06 | PDF 101.3 KB |
| Manual Omni | Users Manual | 2015-07-06 | PDF 2.7 MB |
| Int Photos | Internal Photos | 2015-07-06 | PDF 216 KB |
| Ext Photos 300 | External Photos | 2015-07-06 | PDF 232.9 KB |
| Ext Photos 400 | External Photos | 2015-07-06 | PDF 190.1 KB |
| Ext Photos 500 | External Photos | 2015-07-06 | PDF 637.8 KB |
| Ext Photos 620 | External Photos | 2015-07-06 | PDF 1 MB |
| Ext Photos Omni | External Photos | 2015-07-06 | PDF 424.5 KB |
| Label 300 | ID Label/Location Info | 2015-05-22 | PDF 615.2 KB |
| Label 400 | ID Label/Location Info | 2015-05-22 | PDF 574.8 KB |
| Label 5oo | ID Label/Location Info | 2015-05-22 | PDF 462.1 KB |
| Label 620 | ID Label/Location Info | 2015-05-22 | PDF 578 KB |
| Label Omni | ID Label/Location Info | 2015-05-22 | PDF 483.2 KB |
| Test Setup Photos | Test Setup Photos | 2015-09-15 | PDF 575.9 KB |
| UNNI-2 Annex B Metadata only | Test Setup Photos | 2015-09-15 | PDF 3 MB |
| Test Set Up Photos | Test Setup Photos | 2015-05-22 | PDF 575.9 KB |
| Annex A_UNII-1 Metadata only | Test Report | 2016-12-01 | PDF 360.7 KB |
| Annex A_UNII-3 Metadata only | Test Report | 2016-12-01 | PDF 364 KB |
| FCC Part 1.1310 UNII 1 | Test Report | 2016-12-01 | PDF 390.5 KB |
| FCC Part 1.1310 UNII 3 | Test Report | 2016-12-01 | PDF 470.3 KB |
| FCC Part 15.407 | Test Report | 2016-12-01 | PDF 363.1 KB |
| UNII-1 Annex A Power Tables | Test Report | 2016-12-01 | PDF 360.7 KB |
| UNII-3 Annex A Power Tables | Test Report | 2016-12-01 | PDF 364 KB |
| DFS Annex A | Test Report | 2015-09-15 | PDF 422.1 KB |
| DFS Annex B | Test Report | 2015-09-15 | PDF 110.9 KB |
| DFS Annex C | Test Report | 2015-09-15 | PDF 132.4 KB |
| DFS Annex D | Test Report | 2015-09-15 | PDF 256.4 KB |
| DFS Part 15.407 | Test Report | 2015-09-15 | PDF 1.1 MB |
| UNII-2 Annex A | Test Report | 2015-09-15 | PDF 289.7 KB |
| UNII-2 Annex B | Test Report | 2015-09-15 | PDF 3 MB |
| UNII-2 Annex C | Test Report | 2015-09-15 | PDF 614.3 KB |
| UNII-2 Annex D | Test Report | 2015-09-15 | PDF 1.7 MB |
| UNII-2 Annex E | Test Report | 2015-09-15 | PDF 183.2 KB |
| UNII-2 Annex F | Test Report | 2015-09-15 | PDF 201.8 KB |
| UNII-2 Part 15.407 | Test Report | 2015-09-15 | PDF 567.7 KB |
| Annex A UNII-1 | Test Report | 2015-05-22 | PDF 254.7 KB |
| Annex A UNII-3 | Test Report | 2015-05-22 | PDF 193.1 KB |
| Annex B UNII-1 | Test Report | 2015-05-22 | PDF 2.2 MB |
| Annex B UNII-3 | Test Report | 2015-05-22 | PDF 1.9 MB |
| Annex C UNII-1 | Test Report | 2015-05-22 | PDF 540.9 KB |
| Annex C UNII-3 | Test Report | 2015-05-22 | PDF 584.7 KB |
| Annex D UNII-1 | Test Report | 2015-05-22 | PDF 846.5 KB |
| Annex D UNII-3 | Test Report | 2015-05-22 | PDF 980.6 KB |
| Annex E UNII-1 | Test Report | 2015-05-22 | PDF 139.1 KB |
| Annex E UNII-3 | Test Report | 2015-05-22 | PDF 140.6 KB |
| Annex F UNII-1 | Test Report | 2015-05-22 | PDF 202.6 KB |
| Annex F UNII-3 | Test Report | 2015-05-22 | PDF 202.6 KB |
| Part 15.407 UNII-1 | Test Report | 2015-05-22 | PDF 615 KB |
| Part 15.407 UNII-3 | Test Report | 2015-05-22 | PDF 522.7 KB |
| Attestation | Attestation Statements | 2015-09-15 | PDF 92.5 KB |
| C2PC Letter_v3 | Cover Letter(s) | 2016-12-01 | PDF 23.6 KB |
| Permissive Change Letter Metadata only | Cover Letter(s) | 2016-12-01 | PDF 22.7 KB |
| C2PC Letter | Cover Letter(s) | 2015-09-15 | PDF 87 KB |
| Agent Auth | Cover Letter(s) | 2015-05-22 | PDF 33.3 KB |
| Antenna Info | Cover Letter(s) | 2015-05-22 | PDF 227.4 KB |
| Long Term Confidentiality | Cover Letter(s) | 2015-05-22 | PDF 48.4 KB |
| Short Term Confidentiality | Cover Letter(s) | 2015-05-22 | PDF 49.2 KB |
| Part 1.1310 UNII-2 | RF Exposure Info | 2015-09-15 | PDF 402 KB |
| RF Exposure UNII-1 | RF Exposure Info | 2015-05-22 | PDF 259.4 KB |
| RF Exposure UNII-3 | RF Exposure Info | 2015-05-22 | PDF 259.3 KB |
| Block Diagram Metadata only | Block Diagram | PDF 38.5 KB | |
| Schematics Metadata only | Schematics | PDF 354.2 KB | |
| Theory of Op Metadata only | Operational Description | PDF 77.1 KB | |
| UNII Security 11AC Metadata only | SDR Software/Security Inf | PDF 209.7 KB | |
| UNII Security 11N Metadata only | SDR Software/Security Inf | PDF 214.1 KB | |
| BOM Metadata only | Parts List/Tune Up Info | PDF 56 KB |
Application Information
| Application ID | 822lGBV+m2zRAt9E6Scwng== |
|---|---|
| Final Action Date | 2016-12-01 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0012268215 |
| Model | PBE5AC |
| Frequency Range | 5165-5245 MHz |
| Equipment Class | NII - Unlicensed National Information Infrastructure TX |
| Device Description | PowerBeam 5AC |
| Responsible Party | Mark Feil, Compliance Director, compliance@ui.com  , 385-293-3532 |
| Agent | Amanda Amanda Amanda, Compliance Testing, LLC, amandar@compliancetesting.com  , 480-926-3100 |
| Test Firm | Michael Schafer, Compliance Testing, LLC, michaels@compliancetesting.com , 480-926-3100 |
| TCB Email | amandar@compliancetesting.com |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | No |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | Yes |
| Grant Comments | Class II permissive to add update power tables Power output listed is aggregate conducted. Device operates in a 2 x 2 MIMO configuration with specific antennas for Point-to-Point and Point-to-Multipoint applications as described in this filing. This device supports 10 MHZ, 20 MHz, 30 MHz, 40 MHz, 50Hz, 60MHz and 80MHz BW modes. The antenna(s) used with this transmitter must be professionally installed and provide a minimum of 137cm separation from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| 822lGBV+m2zRAt9E6Scwng== | 2016-12-01 | Class II permissive change or modification of presently authorized equipment |
| E+HhlxCHLpiVc9qTPstXVQ== | 2015-09-15 | Class II permissive change or modification of presently authorized equipment |
| sHQz/0dFQC6taGdqeqEKbg== | 2015-05-22 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application sHQz/0dFQC6taGdqeqEKbg==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Compliance Testing, LLC 1724 S. Nevada Way Mesa, AZ 85204 |
Date of Grant: 05/22/2015 Application Dated: 04/16/2015 |
| Ubiquiti Inc. |
| 685 Third Avenue |
| New York, NY 10017 |
| Attention: Mark Feil , Compliance Director |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | SWX-PBE5AC |
| Name of Grantee: | Ubiquiti Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Access Point |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 | 15E | 5165.0 - 5245.0 | 0.218 | ||
| 38 | 15E | 5735.0 - 5840.0 | 0.269 |
| Power output listed is aggregate conducted. Device operates in a 2 x 2 MIMO configuration with specific antennas for Point-to-Point and Point-to-Multipoint applications as described in this filing. This device supports 10 MHZ, 20 MHz, 30 MHz, 40 MHz, 50Hz, 60MHz and 80MHz BW modes. The antenna(s) used with this transmitter must be professionally installed and provide a minimum of 20cm separation from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
EAS Grant - Application sHQz/0dFQC6taGdqeqEKbg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Ubiquiti Inc. 685 Third Avenue New York, NY 10017 United States |
Date of Grant: 05/22/2015 Application Dated: 04/16/2015 |
| Attention: Mark Feil , Compliance Director |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | SWX-PBE5AC |
| Name of Grantee: | Ubiquiti Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Access Point |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 | 15E | 5165.0 - 5245.0 | 0.218 | ||
| 38 | 15E | 5735.0 - 5840.0 | 0.269 |
| Power output listed is aggregate conducted. Device operates in a 2 x 2 MIMO configuration with specific antennas for Point-to-Point and Point-to-Multipoint applications as described in this filing. This device supports 10 MHZ, 20 MHz, 30 MHz, 40 MHz, 50Hz, 60MHz and 80MHz BW modes. The antenna(s) used with this transmitter must be professionally installed and provide a minimum of 20cm separation from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Compliance Testing, LLC 1724 S. Nevada Way Mesa, AZ 85204 |
Date of Grant: 09/15/2015 Application Dated: 07/08/2015 |
| Ubiquiti Inc. |
| 685 Third Avenue |
| New York, NY 10017 |
| Attention: Mark Feil , Compliance Director |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | SWX-PBE5AC |
| Name of Grantee: | Ubiquiti Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Access Point |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 MO | 15E | 5255.0 - 5340.0 | 0.128 | ||
| 38 MO | 15E | 5480.0 - 5715.0 | 0.195 |
| Class II permissive change to add DFS bands. Power output listed is aggregate conducted. Device operates with specific antennas in a Point-to-Point, 2 x 2 MIMO configuration as described in this filing. This device supports 10 MHZ, 20 MHz, 30 MHz, 40 MHz, 50MHz, 60MHz an80MHz BW modes. The antenna(s) used with this transmitter must be professionally installed and provide a minimum of 20cm separation from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application E+HhlxCHLpiVc9qTPstXVQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Ubiquiti Inc. 685 Third Avenue New York, NY 10017 United States |
Date of Grant: 09/15/2015 Application Dated: 07/08/2015 |
| Attention: Mark Feil , Compliance Director |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | SWX-PBE5AC |
| Name of Grantee: | Ubiquiti Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Access Point |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 MO | 15E | 5255.0 - 5340.0 | 0.128 | ||
| 38 MO | 15E | 5480.0 - 5715.0 | 0.195 |
| Class II permissive change to add DFS bands. Power output listed is aggregate conducted. Device operates with specific antennas in a Point-to-Point, 2 x 2 MIMO configuration as described in this filing. This device supports 10 MHZ, 20 MHz, 30 MHz, 40 MHz, 50MHz, 60MHz an80MHz BW modes. The antenna(s) used with this transmitter must be professionally installed and provide a minimum of 20cm separation from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Compliance Testing, LLC 1724 S. Nevada Way Mesa, AZ 85204 |
Date of Grant: 12/01/2016 Application Dated: 03/18/2016 |
| Ubiquiti Inc. |
| 685 Third Avenue |
| New York, NY 10017 |
| Attention: Mark Feil , Compliance Director |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | SWX-PBE5AC |
| Name of Grantee: | Ubiquiti Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | PowerBeam 5AC |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 MO | 15E | 5165.0 - 5245.0 | 0.218 | ||
| 38 MO | 15E | 5735.0 - 5840.0 | 0.269 |
| Class II permissive to add update power tables Power output listed is aggregate conducted. Device operates in a 2 x 2 MIMO configuration with specific antennas for Point-to-Point and Point-to-Multipoint applications as described in this filing. This device supports 10 MHZ, 20 MHz, 30 MHz, 40 MHz, 50Hz, 60MHz and 80MHz BW modes. The antenna(s) used with this transmitter must be professionally installed and provide a minimum of 137cm separation from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application 822lGBV+m2zRAt9E6Scwng==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Ubiquiti Inc. 685 Third Avenue New York, NY 10017 United States |
Date of Grant: 12/01/2016 Application Dated: 03/18/2016 |
| Attention: Mark Feil , Compliance Director |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | SWX-PBE5AC |
| Name of Grantee: | Ubiquiti Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | PowerBeam 5AC |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 MO | 15E | 5165.0 - 5245.0 | 0.218 | ||
| 38 MO | 15E | 5735.0 - 5840.0 | 0.269 |
| Class II permissive to add update power tables Power output listed is aggregate conducted. Device operates in a 2 x 2 MIMO configuration with specific antennas for Point-to-Point and Point-to-Multipoint applications as described in this filing. This device supports 10 MHZ, 20 MHz, 30 MHz, 40 MHz, 50Hz, 60MHz and 80MHz BW modes. The antenna(s) used with this transmitter must be professionally installed and provide a minimum of 137cm separation from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: |