FCC ID SWX-SR2
2.4GHz mini-PCI 802.11b/g
by Ubiquiti Networks, Inc.
Grantee Code: SWX Product Code: SR2
Latest application date: 2007-05-09
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2007-05-09 |
| 2412-2462 MHz | Original Equipment | 2005-05-25 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| OEM guide | Users Manual | 2007-05-09 | PDF 373.4 KB |
| Users Manual | Users Manual | 2005-05-25 | PDF 302.3 KB |
| Internal Photos | Internal Photos | 2005-05-25 | PDF 281.5 KB |
| external photos | External Photos | 2007-05-09 | PDF 1.2 MB |
| External Photos | External Photos | 2005-05-25 | PDF 91.2 KB |
| ID Label Location Info | ID Label/Location Info | 2005-05-25 | PDF 305.6 KB |
| test photos | Test Setup Photos | 2007-05-09 | PDF 81.2 KB |
| Test Setup Photos | Test Setup Photos | 2005-05-25 | PDF 313.5 KB |
| report | Test Report | 2007-05-09 | PDF 733.4 KB |
| Test Report | Test Report | 2005-05-25 | PDF 1.6 MB |
| agent auth | Cover Letter(s) | 2007-05-09 | PDF 116 KB |
| class II PC letter | Cover Letter(s) | 2007-05-09 | PDF 138.3 KB |
| Agent Authorization Letter | Cover Letter(s) | 2005-05-25 | PDF 100.3 KB |
| Modular Approval Cover Letter | Cover Letter(s) | 2005-05-25 | PDF 71 KB |
| Rquest for Confidentiality Letter | Cover Letter(s) | 2005-05-25 | PDF 102.1 KB |
| TCB Q and A | Cover Letter(s) | 2005-05-25 | PDF 20.1 KB |
| MPE Cal | RF Exposure Info | 2007-05-09 | PDF 32.9 KB |
| antenna spec sheet | RF Exposure Info | 2007-05-09 | PDF 153.3 KB |
| Antenna Specification | Parts List/Tune Up Info | 2005-05-25 | PDF 79.2 KB |
| Block Diagram Metadata only | Block Diagram | PDF 108.1 KB | |
| Schematics Metadata only | Schematics | PDF 127 KB | |
| Operational Description Metadata only | Operational Description | PDF 108.1 KB |
Application Information
| Application ID | yyz9Afonx+c2kpf4wL8Pnw== |
|---|---|
| Final Action Date | 2007-05-09 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0012268215 |
| Model | -SR2 |
| Frequency Range | 2412-2462 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | 2.4GHz mini-PCI 802.11b/g |
| Responsible Party | Michael Taylor, Compliance Manager, compliance@ubnt.com  , 408-942-3084 |
| Test Firm | Alvin Ilarina, MET Laboratories, ailarina@metlabs.com  , 408-919-3774 |
| TCB Email | tcbinfo@metlabs.com |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | No |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Class II Permissive Change to add up to 7.4dBi monopole antennas. Modular Approval. For outdoor applications only. Power output listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna(s) used for this transmitter as shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| yyz9Afonx+c2kpf4wL8Pnw== | 2007-05-09 | Class II permissive change or modification of presently authorized equipment |
| L9b7d/hIIjPC83emdkGVsA== | 2005-05-25 | Original Equipment |
Equipment Authorization
| Frequency | Output | Rules |
|---|---|---|
| 2412-2462 MHz | 0.7060000 | 15C |
Grants
TCB Grant - Application yyz9Afonx+c2kpf4wL8Pnw==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION | TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
| MET Laboratories, Inc. 914 W. Patapsco Avenue Baltimore, MD 21230-3432 | Date of Grant: 05/09/2007 Application Dated: 05/09/2007 |
| Ubiquiti Networks, Inc. |
| 2580 Orchard Parkway |
| San Jose, CA 95131 |
| Attention: Michael Taylor , Compliance Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | SWX-SR2 |
| Name of Grantee: | Ubiquiti Networks, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | 2.4GHz mini-PCI 802.11b/g |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.706 |
| Class II Permissive Change to add up to 7.4dBi monopole antennas. Modular Approval. For outdoor applications only. Power output listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna(s) used for this transmitter as shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. |
EAS Grant - Application yyz9Afonx+c2kpf4wL8Pnw==
| COPY | FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION | COPY |
| Certification |
| Ubiquiti Networks, Inc. 2580 Orchard Parkway San Jose, CA 95131 United States | Date of Grant: 05/09/2007 Application Dated: 05/09/2007 |
| Attention: Michael Taylor , Compliance Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | SWX-SR2 |
| Name of Grantee: | Ubiquiti Networks, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | 2.4GHz mini-PCI 802.11b/g |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.706 |
| Class II Permissive Change to add up to 7.4dBi monopole antennas. Modular Approval. For outdoor applications only. Power output listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna(s) used for this transmitter as shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance.
|
| Mail To: |
| EA749645 |
TCB Grant - Application L9b7d/hIIjPC83emdkGVsA==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538 |
Date of Grant: 05/25/2005 Application Dated: 05/25/2005 |
| Ubiquiti Inc. |
| 685 Third Avenue |
| New York, NY 10017 |
| Attention: Mark Feil , Compliance Director |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | SWX-SR2 |
| Name of Grantee: | Ubiquiti Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | 2.4 GHz 802.11b/g Mini PCI Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.706 |
| Modular Approval. For outdoor applications only. Power output listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna(s) used for this transmitter as shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. |
EAS Grant - Application L9b7d/hIIjPC83emdkGVsA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Ubiquiti Inc. 685 Third Avenue New York, NY 10017 United States |
Date of Grant: 05/25/2005 Application Dated: 05/25/2005 |
| Attention: Mark Feil , Compliance Director |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | SWX-SR2 |
| Name of Grantee: | Ubiquiti Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | 2.4 GHz 802.11b/g Mini PCI Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.706 |
| Modular Approval. For outdoor applications only. Power output listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna(s) used for this transmitter as shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. |
| Mail To: |