FCC ID SWX-UAPSTMXG
UniFi WiFi BaseStationXG
by Ubiquiti Inc.
Grantee Code: SWX Product Code: UAPSTMXG
Latest application date: 2018-07-13
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2018-07-13 |
| 2402-2480 MHz | Original Equipment | 2018-01-04 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| User Manual UWB-XG Part 1 | Users Manual | 2019-01-09 | PDF 5.6 MB |
| User Manual UWB-XG Part 2 | Users Manual | 2019-01-09 | PDF 1.9 MB |
| User Manual UWB-XG-BK Part 1 | Users Manual | 2019-01-09 | PDF 4.1 MB |
| User Manual UWB-XG-BK Part 2 | Users Manual | 2019-01-09 | PDF 2.5 MB |
| User Manual BK Part 1 | Users Manual | 2018-07-03 | PDF 4.4 MB |
| User Manual BK Part 2 | Users Manual | 2018-07-03 | PDF 1.6 MB |
| User Manual Part 1 | Users Manual | 2018-07-03 | PDF 4.1 MB |
| User Manual Part 2 | Users Manual | 2018-07-03 | PDF 1.5 MB |
| Internal Photos 1 | Internal Photos | 2019-01-09 | PDF 4.5 MB |
| Internal Photos 2 | Internal Photos | 2019-01-09 | PDF 4.9 MB |
| Internal Photos Part 1 | Internal Photos | 2018-07-03 | PDF 5.4 MB |
| Internal Photos Part 2 | Internal Photos | 2018-07-03 | PDF 5.2 MB |
| External Photos | External Photos | 2019-01-09 | PDF 1.7 MB |
| External Photos | External Photos | 2018-07-03 | PDF 1.2 MB |
| Label | ID Label/Location Info | 2018-07-13 | PDF 112.3 KB |
| Label | ID Label/Location Info | 2018-01-04 | PDF 178.3 KB |
| Test Setup Photos | Test Setup Photos | 2018-07-03 | PDF 631.4 KB |
| Test Report | Test Report | 2018-07-13 | PDF 217.1 KB |
| Test Report | Test Report | 2018-01-04 | PDF 1.4 MB |
| Class II Permissive Change Letter | Cover Letter(s) | 2018-07-13 | PDF 36.4 KB |
| Confidentiality Request Letter | Cover Letter(s) | 2018-07-13 | PDF 32.3 KB |
| POA | Cover Letter(s) | 2018-07-13 | PDF 36.4 KB |
| Confidentiality Request Letter | Cover Letter(s) | 2018-01-04 | PDF 33.2 KB |
| POA | Cover Letter(s) | 2018-01-04 | PDF 49.8 KB |
| MPE Report | RF Exposure Info | 2018-07-13 | PDF 264.6 KB |
| MPE Report | RF Exposure Info | 2018-01-04 | PDF 197 KB |
| Block Diagram Metadata only | Block Diagram | PDF 83.9 KB | |
| Schematics Metadata only | Schematics | PDF 1.3 MB | |
| Operational Description Metadata only | Operational Description | PDF 145.7 KB |
Application Information
| Application ID | t1o0El1Pvf4MG6lOZ/0nFg== |
|---|---|
| Final Action Date | 2018-07-13 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0012268215 |
| Model | UAPSTMXG |
| Frequency Range | 2402-2480 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | UniFi WiFi BaseStationXG |
| Responsible Party | Mark Feil, Compliance Director, compliance@ui.com  , 385-293-3532 |
| Test Firm | Alex Chen, SPORTON International Inc., alex@sporton.com.tw  , 886-3-327-3456 |
| TCB Email | TEI@TIMCOENGR.COM  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | Yes |
| Short-Term Confidentiality Date | 01/09/2019 |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | No |
| Composite Part | Yes |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Power listed is conducted. Professional installation is required. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 24cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| t1o0El1Pvf4MG6lOZ/0nFg== | 2018-07-13 | Class II permissive change or modification of presently authorized equipment |
| eHnG9x+Sami0k53FNAKdrQ== | 2018-01-04 | Original Equipment |
Equipment Authorization
| Frequency | Output | Rules |
|---|---|---|
| 2402-2480 MHz | 0.0053000 | 15C |
Grants
TCB Grant - Application t1o0El1Pvf4MG6lOZ/0nFg==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 07/13/2018 Application Dated: 07/12/2018 |
| Ubiquiti Inc. |
| 685 Third Avenue |
| New York, NY 10017 |
| Attention: Mark Feil , Compliance Director |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | SWX-UAPSTMXG |
| Name of Grantee: | Ubiquiti Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | UniFi WiFi BaseStationXG |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.0053 |
| Power listed is conducted. Professional installation is required. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 24cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
EAS Grant - Application t1o0El1Pvf4MG6lOZ/0nFg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Ubiquiti Inc. 685 Third Avenue New York, NY 10017 United States |
Date of Grant: 07/13/2018 Application Dated: 07/12/2018 |
| Attention: Mark Feil , Compliance Director |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | SWX-UAPSTMXG |
| Name of Grantee: | Ubiquiti Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | UniFi WiFi BaseStationXG |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.0053 |
| Power listed is conducted. Professional installation is required. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 24cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 01/04/2018 Application Dated: 01/03/2018 |
| Ubiquiti Inc. |
| 685 Third Avenue |
| New York, NY 10017 |
| Attention: Mark Feil , Compliance Director |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | SWX-UAPSTMXG |
| Name of Grantee: | Ubiquiti Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | UniFi StadiumXG |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.0053 |
| Power listed is conducted. Professional installation is required. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 24cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
EAS Grant - Application eHnG9x+Sami0k53FNAKdrQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Ubiquiti Inc. 685 Third Avenue New York, NY 10017 United States |
Date of Grant: 01/04/2018 Application Dated: 01/03/2018 |
| Attention: Mark Feil , Compliance Director |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | SWX-UAPSTMXG |
| Name of Grantee: | Ubiquiti Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | UniFi StadiumXG |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.0053 |
| Power listed is conducted. Professional installation is required. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 24cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| Mail To: |