UINS U-Installer RF Exposure Info Test Report_SAR revised Ubiquiti Networks, Inc.

Ubiquiti Networks, Inc. U-Installer

FCC ID Filing: SWX-UINS
Purchase on Amazon: U-Installer

Trouble Viewing? See the or view the HTML Version or PDF in frame
Page 1 of UINS U-Installer RF Exposure Info Test Report_SAR revised Ubiquiti Networks, Inc.

FCC SAR Test Report
Report No. : FA732334
FCC SAR Test Report
APPLICANT
: Ubiquiti Networks, Inc.
EQUIPMENT
: U-Installer
BRAND NAME
: UBIQUITI
MODEL NAME
: U-Installer
FCC ID
: SWX-UINS
STANDARD
: FCC 47 CFR Part 2 (2.1093)
ANSI/IEEE C95.1-1992
IEEE 1528-2013
We, SPORTON INTERNATIONAL INC., would like to declare that the tested sample has been
evaluated in accordance with the procedures and had been in compliance with the
applicable technical standards.
The test results in this report apply exclusively to the tested model / sample. Without
written approval of SPORTON INTERNATIONAL INC., the test report shall not be
reproduced except in full.
Reviewed by: Eric Huang / Manager
Approved by: Jones Tsai / Manager
SPORTON INTERNATIONAL INC.
No.52, Hwa Ya 1st Rd., Hwa Ya Technology Park, Kwei-Shan District, Taoyuan City, Taiwan (R.O.C.)
SPORTON INTERNATIONAL INC.
TEL : 886-3-327-3456 / FAX : 886-3-328-4978
FCC ID : SWX-UINS
Page 1 of 24
Issued Date : Apr. 17, 2017
Form version. : 170125
FCC SAR Test Report
Report No. : FA732334
Table of Contents
1. Statement of Compliance ............................................................................................................................................. 4
2. Administration Data ...................................................................................................................................................... 5
3. Guidance Applied .......................................................................................................................................................... 5
4. Equipment Under Test (EUT) Information ................................................................................................................... 5
4.1 General Information ............................................................................................................................................... 5
5. RF Exposure Limits....................................................................................................................................................... 6
5.1 Uncontrolled Environment ...................................................................................................................................... 6
5.2 Controlled Environment.......................................................................................................................................... 6
6. Specific Absorption Rate (SAR) ................................................................................................................................... 7
6.1 Introduction ............................................................................................................................................................ 7
6.2 SAR Definition ........................................................................................................................................................ 7
7. System Description and Setup .................................................................................................................................... 8
7.1 E-Field Probe ......................................................................................................................................................... 9
7.2 Data Acquisition Electronics (DAE) ........................................................................................................................ 9
7.3 Phantom ................................................................................................................................................................10
7.4 Device Holder........................................................................................................................................................ 11
8. Measurement Procedures ...........................................................................................................................................12
8.1 Spatial Peak SAR Evaluation ................................................................................................................................12
8.2 Power Reference Measurement............................................................................................................................13
8.3 Area Scan .............................................................................................................................................................13
8.4 Zoom Scan ............................................................................................................................................................14
8.5 Volume Scan Procedures ......................................................................................................................................15
8.6 Power Drift Monitoring...........................................................................................................................................15
9. Test Equipment List .....................................................................................................................................................15
10. System Verification ....................................................................................................................................................16
10.1 Tissue Simulating Liquids ....................................................................................................................................16
10.2 Tissue Verification ...............................................................................................................................................17
10.3 System Performance Check Results...................................................................................................................18
11. Conducted RF Output Power (Unit: dBm) ................................................................................................................19
12. Bluetooth Exclusions Applied ..................................................................................................................................20
13. Antenna Location .......................................................................................................................................................20
14. SAR Test Results .......................................................................................................................................................21
14.1 Body-worn SAR...................................................................................................................................................21
15. Uncertainty Assessment ...........................................................................................................................................22
16. References ..................................................................................................................................................................24
Appendix A. Plots of System Performance Check
Appendix B. Plots of High SAR Measurement
Appendix C. DASY Calibration Certificate
Appendix D. Test Setup Photos
SPORTON INTERNATIONAL INC.
TEL : 886-3-327-3456 / FAX : 886-3-328-4978
FCC ID : SWX-UINS
Page 2 of 24
Issued Date : Apr. 17, 2017
Form version. : 170125
FCC SAR Test Report
Report No. : FA732334
Revision History
REPORT NO.
VERSION
FA732334
Rev. 01
DESCRIPTION
Initial issue of report
SPORTON INTERNATIONAL INC.
TEL : 886-3-327-3456 / FAX : 886-3-328-4978
FCC ID : SWX-UINS
Page 3 of 24
ISSUED DATE
Apr. 17, 2017
Issued Date : Apr. 17, 2017
Form version. : 170125
FCC SAR Test Report
Report No. : FA732334
1. Statement of Compliance
The maximum results of Specific Absorption Rate (SAR) found during testing for Ubiquiti Networks, Inc.,
U-Installer, U-Installer are as follows.
Equipment
Class
DTS
Frequency
Band
WLAN
Date of Testing:
2.4GHz WLAN
Highest SAR Summary
Body-worn
(Separation 0mm)
1g SAR (W/kg)
0.65
2017/3/29
This device is in compliance with Specific Absorption Rate (SAR) for general population/uncontrolled
exposure limits (1.6 W/kg) specified in FCC 47 CFR part 2 (2.1093) and ANSI/IEEE C95.1-1992, and had
been tested in accordance with the measurement methods and procedures specified in IEEE 1528-2013 and
FCC KDB publications
SPORTON INTERNATIONAL INC.
TEL : 886-3-327-3456 / FAX : 886-3-328-4978
FCC ID : SWX-UINS
Page 4 of 24
Issued Date : Apr. 17, 2017
Form version. : 170125
FCC SAR Test Report
Report No. : FA732334
2. Administration Data
Test Site
Test Site Location
Testing Laboratory
SPORTON INTERNATIONAL INC.
No.52, Hwa Ya 1st Rd., Hwa Ya Technology Park, Kwei-Shan District, Taoyuan City,
Taiwan (R.O.C.)
TEL: +886-3-327-3456
FAX: +886-3-328-4978
Applicant
Company Name
Address
Ubiquiti Networks, Inc.
2580 Orchard Parkway, San Jose, California, United States 95131
Manufacturer
Company Name
Address
Ubiquiti Networks, Inc.
2580 Orchard Parkway, San Jose, California, United States 95131
3. Guidance Applied
The Specific Absorption Rate (SAR) testing specification, method, and procedure for this device is in accordance with
the following standards:
‧
FCC 47 CFR Part 2 (2.1093)
‧
ANSI/IEEE C95.1-1992
‧
IEEE 1528-2013
‧
FCC KDB 865664 D01 SAR Measurement 100 MHz to 6 GHz v01r04
‧
FCC KDB 865664 D02 SAR Reporting v01r02
‧
FCC KDB 447498 D01 General RF Exposure Guidance v06
‧
FCC KDB 248227 D01 802.11 Wi-Fi SAR v02r02
4. Equipment Under Test (EUT) Information
4.1 General Information
Product Feature & Specification
Equipment Name
U-Installer
Brand Name
UBIQUITI
Model Name
U-Installer
FCC ID
SWX-UINS
Wireless Technology and WLAN 2.4GHz Band: 2412 MHz ~ 2462 MHz
Frequency Range
Bluetooth: 2402 MHz ~ 2480 MHz
WLAN 2.4GHz : 802.11b/g/n HT20/HT40
Mode
Bluetooth : LE
Remark :
1. WLAN and Bluetooth cannot transmit simultaneously on this device.
SPORTON INTERNATIONAL INC.
TEL : 886-3-327-3456 / FAX : 886-3-328-4978
FCC ID : SWX-UINS
Page 5 of 24
Issued Date : Apr. 17, 2017
Form version. : 170125
FCC SAR Test Report
Report No. : FA732334
5. RF Exposure Limits
5.1 Uncontrolled Environment
Uncontrolled Environments are defined as locations where there is the exposure of individuals who have no knowledge or
control of their exposure. The general population/uncontrolled exposure limits are applicable to situations in which the
general public may be exposed or in which persons who are exposed as a consequence of their employment may not be
made fully aware of the potential for exposure or cannot exercise control over their exposure. Members of the general
public would come under this category when exposure is not employment-related; for example, in the case of a wireless
transmitter that exposes persons in its vicinity.
5.2 Controlled Environment
Controlled Environments are defined as locations where there is exposure that may be incurred by persons who are
aware of the potential for exposure, (i.e. as a result of employment or occupation). In general, occupational/controlled
exposure limits are applicable to situations in which persons are exposed as a consequence of their employment, who
have been made fully aware of the potential for exposure and can exercise control over their exposure. The exposure
category is also applicable when the exposure is of a transient nature due to incidental passage through a location where
the exposure levels may be higher than the general population/uncontrolled limits, but the exposed person is fully aware
of the potential for exposure and can exercise control over his or her exposure by leaving the area or by some other
appropriate means.
Limits for Occupational/Controlled Exposure (W/kg)
Limits for General Population/Uncontrolled Exposure (W/kg)
1.
Whole-Body SAR is averaged over the entire body, partial-body SAR is averaged over any 1gram of tissue
defined as a tissue volume in the shape of a cube. SAR for hands, wrists, feet and ankles is averaged over any
10 grams of tissue defined as a tissue volume in the shape of a cube.
SPORTON INTERNATIONAL INC.
TEL : 886-3-327-3456 / FAX : 886-3-328-4978
FCC ID : SWX-UINS
Page 6 of 24
Issued Date : Apr. 17, 2017
Form version. : 170125
FCC SAR Test Report
Report No. : FA732334
6. Specific Absorption Rate (SAR)
6.1 Introduction
SAR is related to the rate at which energy is absorbed per unit mass in an object exposed to a radio field. The SAR
distribution in a biological body is complicated and is usually carried out by experimental techniques or numerical
modeling. The standard recommends limits for two tiers of groups, occupational/controlled and general
population/uncontrolled, based on a person’s awareness and ability to exercise control over his or her exposure. In
general, occupational/controlled exposure limits are higher than the limits for general population/uncontrolled.
6.2 SAR Definition
The SAR definition is the time derivative (rate) of the incremental energy (dW) absorbed by (dissipated in) an
incremental mass (dm) contained in a volume element (dv) of a given density (ρ). The equation description is as
below:
� =
� ��
� ��
)= (
�� ��
�� ���
SAR is expressed in units of Watts per kilogram (W/kg)
�|�|�
� =
�
Where: σ is the conductivity of the tissue, ρ is the mass density of the tissue and E is the RMS electrical field strength.
SPORTON INTERNATIONAL INC.
TEL : 886-3-327-3456 / FAX : 886-3-328-4978
FCC ID : SWX-UINS
Page 7 of 24
Issued Date : Apr. 17, 2017
Form version. : 170125
FCC SAR Test Report
Report No. : FA732334
7. System Description and Setup
The DASY system used for performing compliance tests consists of the following items:









A standard high precision 6-axis robot with controller, teach pendant and software. An arm extension for
accommodating the data acquisition electronics (DAE).
An isotropic Field probe optimized and calibrated for the targeted measurement.
A data acquisition electronics (DAE) which performs the signal amplification, signal multiplexing,
AD-conversion, offset measurements, mechanical surface detection, collision detection, etc. The unit is
battery powered with standard or rechargeable batteries. The signal is optically transmitted to the EOC.
The Electro-optical converter (EOC) performs the conversion from optical to electrical signals for the
digital communication to the DAE. To use optical surface detection, a special version of the EOC is
required. The EOC signal is transmitted to the measurement server.
The function of the measurement server is to perform the time critical tasks such as signal filtering,
control of the robot operation and fast movement interrupts.
The Light Beam used is for probe alignment. This improves the (absolute) accuracy of the probe
positioning.
A computer running WinXP or Win7 and the DASY5 software.
Remote control and teach pendant as well as additional circuitry for robot safety such as warning lamps,
etc.
The phantom, the device holder and other accessories according to the targeted measurement.
SPORTON INTERNATIONAL INC.
TEL : 886-3-327-3456 / FAX : 886-3-328-4978
FCC ID : SWX-UINS
Page 8 of 24
Issued Date : Apr. 17, 2017
Form version. : 170125
FCC SAR Test Report
7.1 E-Field Probe
Report No. : FA732334
The SAR measurement is conducted with the dosimetric probe (manufactured by SPEAG).The probe is specially
designed and calibrated for use in liquid with high permittivity. The dosimetric probe has special calibration in liquid at
different frequency. This probe has a built in optical surface detection system to prevent from collision with phantom.

Construction
Frequency
Directivity
Dynamic Range
Dimensions
Symmetric design with triangular core
Interleaved sensors
Built-in shielding against static charges
PEEK enclosure material (resistant to organic
solvents, e.g., DGBE)
10 MHz – 4 GHz;
Linearity: ±0.2 dB (30 MHz – 4 GHz)
±0.2 dB in TSL (rotation around probe axis)
±0.3 dB in TSL (rotation normal to probe axis)
5 µW/g – >100 mW/g;
Linearity: ±0.2 dB
Overall length: 337 mm (tip: 20 mm)
Tip diameter: 3.9 mm (body: 12 mm)
Distance from probe tip to dipole centers: 3.0 mm

Construction
Frequency
Directivity
Dynamic Range
Dimensions
Symmetric design with triangular core
Built-in shielding against static charges
PEEK enclosure material (resistant to organic
solvents, e.g., DGBE)
10 MHz – >6 GHz
Linearity: ±0.2 dB (30 MHz – 6 GHz)
±0.3 dB in TSL (rotation around probe axis)
±0.5 dB in TSL (rotation normal to probe axis)
10 µW/g – >100 mW/g
Linearity: ±0.2 dB (noise: typically <1 µW/g)
Overall length: 337 mm (tip: 20 mm)
Tip diameter: 2.5 mm (body: 12 mm)
Typical distance from probe tip to dipole centers: 1
mm
7.2 Data Acquisition Electronics (DAE)
The data acquisition electronics (DAE) consists of a highly sensitive
electrometer-grade
preamplifier
with
auto-zeroing,
channel
and
gain-switching multiplexer, a fast 16 bit AD-converter and a command
decoder and control logic unit. Transmission to the measurement server is
accomplished through an optical downlink for data and status information as
well as an optical uplink for commands and the clock.
The input impedance of the DAE is 200 MOhm; the inputs are symmetrical
and floating. Common mode rejection is above 80 dB.
SPORTON INTERNATIONAL INC.
TEL : 886-3-327-3456 / FAX : 886-3-328-4978
FCC ID : SWX-UINS
Fig 5.1
Page 9 of 24
Photo of DAE
Issued Date : Apr. 17, 2017
Form version. : 170125
FCC SAR Test Report
7.3 Phantom
Report No. : FA732334

Shell Thickness
Filling Volume
Dimensions
Measurement Areas
2 ± 0.2 mm;
Center ear point: 6 ± 0.2 mm
Approx. 25 liters
Length: 1000 mm; Width: 500 mm; Height:
adjustable feet
Left Hand, Right Hand, Flat Phantom
The bottom plate contains three pair of bolts for locking the device holder. The device holder positions are adjusted to the
standard measurement positions in the three sections. A white cover is provided to tap the phantom during off-periods to
prevent water evaporation and changes in the liquid parameters. On the phantom top, three reference markers are
provided to identify the phantom position with respect to the robot.

Shell Thickness
Filling Volume
Dimensions
2 ± 0.2 mm (sagging: <1%)
Approx. 30 liters
Major ellipse axis: 600 mm
Minor axis: 400 mm
The ELI phantom is intended for compliance testing of handheld and body-mounted wireless devices in the frequency
range of 30 MHz to 6 GHz. ELI4 is fully compatible with standard and all known tissue simulating liquids.
SPORTON INTERNATIONAL INC.
TEL : 886-3-327-3456 / FAX : 886-3-328-4978
FCC ID : SWX-UINS
Page 10 of 24
Issued Date : Apr. 17, 2017
Form version. : 170125
FCC SAR Test Report
7.4 Device Holder
Report No. : FA732334

In combination with the Twin SAM V5.0/V5.0c or ELI phantoms, the Mounting Device for Hand-Held Transmitters enables
rotation of the mounted transmitter device to specified spherical coordinates. At the heads, the rotation axis is at the ear
opening. Transmitter devices can be easily and accurately positioned according to IEC 62209-1, IEEE 1528, FCC, or
other specifications. The device holder can be locked for positioning at different phantom sections (left head, right head,
flat). And upgrade kit to Mounting Device to enable easy mounting of wider devices like big smart-phones, e-books, small
tablets, etc. It holds devices with width up to 140 mm.
Mounting Device for Hand-Held
Transmitters
Mounting Device Adaptor for Wide-Phones

The extension is lightweight and made of POM, acrylic glass and foam. It fits easily on the upper part of the mounting
device in place of the phone positioned. The extension is fully compatible with the SAM Twin and ELI phantoms.
Mounting Device for Laptops
SPORTON INTERNATIONAL INC.
TEL : 886-3-327-3456 / FAX : 886-3-328-4978
FCC ID : SWX-UINS
Page 11 of 24
Issued Date : Apr. 17, 2017
Form version. : 170125
FCC SAR Test Report
Report No. : FA732334
8. Measurement Procedures
The measurement procedures are as follows:

(a) For WWAN power measurement, use base station simulator to configure EUT WWAN transmission in conducted
connection with RF cable, at maximum power in each supported wireless interface and frequency band.
(b) Read the WWAN RF power level from the base station simulator.
(c) For WLAN/BT power measurement, use engineering software to configure EUT WLAN/BT continuously
transmission, at maximum RF power in each supported wireless interface and frequency band
(d) Connect EUT RF port through RF cable to the power meter, and measure WLAN/BT output power

(a) Use base station simulator to configure EUT WWAN transmission in radiated connection, and engineering
software to configure EUT WLAN/BT continuously transmission, at maximum RF power, in the highest power
channel.
(b) Place the EUT in the positions as Appendix D demonstrates.
(c) Set scan area, grid size and other setting on the DASY software.
(d) Measure SAR results for the highest power channel on each testing position.
(e) Find out the largest SAR result on these testing positions of each band
(f) Measure SAR results for other channels in worst SAR testing position if the reported SAR of highest power
channel is larger than 0.8 W/kg
According to the test standard, the recommended procedure for assessing the peak spatial-average SAR value
consists of the following steps:
(a)
(b)
(c)
(d)
Power reference measurement
Area scan
Zoom scan
Power drift measurement
8.1 Spatial Peak SAR Evaluation
The procedure for spatial peak SAR evaluation has been implemented according to the test standard. It can be
conducted for 1g and 10g, as well as for user-specific masses. The DASY software includes all numerical
procedures necessary to evaluate the spatial peak SAR value.
The base for the evaluation is a "cube" measurement. The measured volume must include the 1g and 10g cubes
with the highest averaged SAR values. For that purpose, the center of the measured volume is aligned to the
interpolated peak SAR value of a previously performed area scan.
The entire evaluation of the spatial peak values is performed within the post-processing engine (SEMCAD). The
system always gives the maximum values for the 1g and 10g cubes. The algorithm to find the cube with highest
averaged SAR is divided into the following stages:
(a)
(b)
(c)
(d)
(e)
(f)
Extraction of the measured data (grid and values) from the Zoom Scan
Calculation of the SAR value at every measurement point based on all stored data (A/D values and
measurement parameters)
Generation of a high-resolution mesh within the measured volume
Interpolation of all measured values form the measurement grid to the high-resolution grid
Extrapolation of the entire 3-D field distribution to the phantom surface over the distance from sensor to surface
Calculation of the averaged SAR within masses of 1g and 10g
SPORTON INTERNATIONAL INC.
TEL : 886-3-327-3456 / FAX : 886-3-328-4978
FCC ID : SWX-UINS
Page 12 of 24
Issued Date : Apr. 17, 2017
Form version. : 170125
FCC SAR Test Report
8.2 Power Reference Measurement
Report No. : FA732334
The Power Reference Measurement and Power Drift Measurements are for monitoring the power drift of the device under
test in the batch process. The minimum distance of probe sensors to surface determines the closest measurement point
to phantom surface. This distance cannot be smaller than the distance of sensor calibration points to probe tip as defined
in the probe properties.
8.3 Area Scan
The area scan is used as a fast scan in two dimensions to find the area of high field values, before doing a fine
measurement around the hot spot. The sophisticated interpolation routines implemented in DASY software can find the
maximum found in the scanned area, within a range of the global maximum. The range (in dB0 is specified in the
standards for compliance testing. For example, a 2 dB range is required in IEEE standard 1528 and IEC 62209 standards,
whereby 3 dB is a requirement when compliance is assessed in accordance with the ARIB standard (Japan), if only one
zoom scan follows the area scan, then only the absolute maximum will be taken as reference. For cases where multiple
maximums are detected, the number of zoom scans has to be increased accordingly.
Area scan parameters extracted from FCC KDB 865664 D01v01r04 SAR measurement 100 MHz to 6 GHz.
SPORTON INTERNATIONAL INC.
TEL : 886-3-327-3456 / FAX : 886-3-328-4978
FCC ID : SWX-UINS
Page 13 of 24
Issued Date : Apr. 17, 2017
Form version. : 170125
FCC SAR Test Report
8.4 Zoom Scan
Report No. : FA732334
Zoom scans are used assess the peak spatial SAR values within a cubic averaging volume containing 1 gram and 10
gram of simulated tissue. The zoom scan measures points (refer to table below) within a cube shoes base faces are
centered on the maxima found in a preceding area scan job within the same procedure. When the measurement is done,
the zoom scan evaluates the averaged SAR for 1 gram and 10 gram and displays these values next to the job’s label.
Zoom scan parameters extracted from FCC KDB 865664 D01v01r04 SAR measurement 100 MHz to 6 GHz.
SPORTON INTERNATIONAL INC.
TEL : 886-3-327-3456 / FAX : 886-3-328-4978
FCC ID : SWX-UINS
Page 14 of 24
Issued Date : Apr. 17, 2017
Form version. : 170125
FCC SAR Test Report
8.5 Volume Scan Procedures
Report No. : FA732334
The volume scan is used for assess overlapping SAR distributions for antennas transmitting in different frequency bands.
It is equivalent to an oversized zoom scan used in standalone measurements. The measurement volume will be used to
enclose all the simultaneous transmitting antennas. For antennas transmitting simultaneously in different frequency bands,
the volume scan is measured separately in each frequency band. In order to sum correctly to compute the 1g aggregate
SAR, the EUT remain in the same test position for all measurements and all volume scan use the same spatial resolution
and grid spacing. When all volume scan were completed, the software, SEMCAD postprocessor can combine and
subsequently superpose these measurement data to calculating the multiband SAR.
8.6 Power Drift Monitoring
All SAR testing is under the EUT install full charged battery and transmit maximum output power. In DASY measurement
software, the power reference measurement and power drift measurement procedures are used for monitoring the power
drift of EUT during SAR test. Both these procedures measure the field at a specified reference position before and after
the SAR testing. The software will calculate the field difference in dB. If the power drifts more than 5%, the SAR will be
retested.
9. Test Equipment List
Manufacturer
Name of Equipment
Type/Model
Serial Number
SPEAG
2450MHz System Validation Kit
D2450V2
SPEAG
Data Acquisition Electronics
DAE3
Calibration
Last Cal.
Due Date
736
Aug. 30, 2016
Aug. 29, 2017
577
Sep. 28, 2016
Sep. 27, 2017
SPEAG
Dosimetric E-Field Probe
EX3DV4
3931
Oct. 03, 2016
Oct. 02, 2017
Wisewind
Thermometer
HTC-1
TM225
Oct. 12, 2016
Oct. 11, 2017
SPEAG
Device Holder
N/A
N/A
N/A
N/A
Anritsu
Signal Generator
MG3710A
6201502524
Dec. 09, 2016
Dec. 08, 2017
Agilent
ENA Network Analyzer
E5071C
MY46316648
Jan. 04, 2017
Jan. 03, 2018
SPEAG
Dielectric Probe Kit
DAK-3.5
1126
Jul. 19, 2016
Jul. 18, 2017
LINE SEIKI
Digital Thermometer
LKMelectronic
DTM3000SPEZIAL
Sep. 05, 2016
Sep. 04, 2017
Anritsu
Power Meter
ML2495A
1419002
May. 10, 2016
May. 09, 2017
Anritsu
Power Sensor
MA2411B
1339124
May. 10, 2016
May. 09, 2017
Aug. 21, 2017
Agilent
Spectrum Analyzer
E4408B
MY44211028
Aug. 22, 2016
Anritsu
Spectrum Analyzer
MS2830A
6201396378
Jun. 21, 2016
Jun. 20, 2017
Mini-Circuits
Power Amplifier
ZVE-8G+
D120604
Mar. 09, 2017
Mar. 08, 2018
Mini-Circuits
Power Amplifier
ZHL-42W+
QA1344002
Mar. 09, 2017
Mar. 08, 2018
ATM
Dual Directional Coupler
C122H-10
P610410z-02
Note 1
Woken
Attenuator 1
WK0602-XX
N/A
Note 1
PE
Attenuator 2
PE7005-10
N/A
Note 1
PE
Attenuator 3
PE7005- 3
N/A
Note 1
General Note:
1.
Prior to system verification and validation, the path loss from the signal generator to the system check source and
the power meter, which includes the amplifier, cable, attenuator and directional coupler, was measured by the
network analyzer. The reading of the power meter was offset by the path loss difference between the path to the
power meter and the path to the system check source to monitor the actual power level fed to the system check
source.
SPORTON INTERNATIONAL INC.
TEL : 886-3-327-3456 / FAX : 886-3-328-4978
FCC ID : SWX-UINS
Page 15 of 24
Issued Date : Apr. 17, 2017
Form version. : 170125
FCC SAR Test Report
Report No. : FA732334
10. System Verification
10.1 Tissue Simulating Liquids
For the measurement of the field distribution inside the SAM phantom with DASY, the phantom must be
filled with around 25 liters of homogeneous body tissue simulating liquid. For head SAR testing, the liquid
height from the ear reference point (ERP) of the phantom to the liquid top surface is larger than 15 cm,
which is shown in Fig. 10.1. For body SAR testing, the liquid height from the center of the flat phantom to
the liquid top surface is larger than 15 cm, which is shown in Fig. 10.2.
Fig 10.1Photo of Liquid Height for Head SAR
SPORTON INTERNATIONAL INC.
TEL : 886-3-327-3456 / FAX : 886-3-328-4978
FCC ID : SWX-UINS
Fig 10.2 Photo of Liquid Height for Body SAR
Page 16 of 24
Issued Date : Apr. 17, 2017
Form version. : 170125
FCC SAR Test Report
10.2 Tissue Verification
Report No. : FA732334
The following tissue formulations are provided for reference only as some of the parameters have not been
thoroughly verified. The composition of ingredients may be modified accordingly to achieve the desired target
tissue parameters required for routine SAR evaluation.
Frequency
(MHz)
Water
(%)
Sugar
(%)
Cellulose
(%)
750
835
900
1800, 1900, 2000
2450
2600
41.1
40.3
40.3
55.2
55.0
54.8
57.0
57.9
57.9
0.2
0.2
0.2
750
835
900
1800, 1900, 2000
2450
2600
51.7
50.8
50.8
70.2
68.6
68.1
47.2
48.2
48.2
Salt
(%)
For Head
1.4
1.4
1.4
0.3
0.1
For Body
0.9
0.9
0.9
0.4
0.1
Preventol
(%)
DGBE
(%)
Conductivity
(σ)
Permittivity
(εr)
0.2
0.2
0.2
44.5
45.0
45.1
0.89
0.90
0.97
1.40
1.80
1.96
41.9
41.5
41.5
40.0
39.2
39.0
0.1
0.1
0.1
29.4
31.4
31.8
0.96
0.97
1.05
1.52
1.95
2.16
55.5
55.2
55.0
53.3
52.7
52.5
Delta (εr)
Limit (%)
(%)
Date
Simulating Liquid for 5GHz, Manufactured by SPEAG
Ingredients
(% by weight)
Water
64~78%
Mineral oil
11~18%
Emulsifiers
9~15%
Additives and Salt
2~3%

Frequency Tissue
(MHz)
Type
2450
MSL
Liquid
Temp.
(℃)
22.5
Conductivity Permittivity Conductivity Permittivity Delta (σ)
(σ)
(εr)
Target (σ) Target (εr)
(%)
1.984
SPORTON INTERNATIONAL INC.
TEL : 886-3-327-3456 / FAX : 886-3-328-4978
FCC ID : SWX-UINS
53.807
1.95
52.70
Page 17 of 24
1.74
2.10
±5
2017/3/29
Issued Date : Apr. 17, 2017
Form version. : 170125
FCC SAR Test Report
10.3 System Performance Check Results
Report No. : FA732334
Comparing to the original SAR value provided by SPEAG, the verification data should be within its specification of 10 %.
Below table shows the target SAR and measured SAR after normalized to 1W input power. The table below indicates the
system performance check can meet the variation criterion and the plots can be referred to Appendix A of this report.
Input
Measured Targeted Normalized
Frequency Tissue
Dipole
Probe
DAE
Deviation
Power
1g SAR 1g SAR
1g SAR
(MHz)
Type
S/N
S/N
S/N
(%)
(mW)
(W/kg)
(W/kg)
(W/kg)
2017/3/29
2450
MSL
250 D2450V2-736 EX3DV4 - SN3931 DAE3 Sn577 13.40
52.10
53.6
2.88
Date
Fig 8.3.1 System Performance Check Setup
SPORTON INTERNATIONAL INC.
TEL : 886-3-327-3456 / FAX : 886-3-328-4978
FCC ID : SWX-UINS
Fig 8.3.2 Setup Photo
Page 18 of 24
Issued Date : Apr. 17, 2017
Form version. : 170125
FCC SAR Test Report
Report No. : FA732334
11. Conducted RF Output Power (Unit: dBm)

General Note:
1.
Per KDB 248227 D01v02r02, SAR test reduction is determined according to 802.11 transmission mode
configurations and certain exposure conditions with multiple test positions. In the 2.4 GHz band, separate SAR
procedures are applied to DSSS and OFDM configurations to simplify DSSS test requirements. For OFDM, in both
2.4 and 5 GHz bands, an initial test configuration must be determined for each standalone and aggregated
frequency band, according to the transmission mode configuration with the highest maximum output power
specified for production units to perform SAR measurements. If the same highest maximum output power applies to
different combinations of channel bandwidths, modulations and data rates, additional procedures are applied to
determine which test configurations require SAR measurement. When applicable, an initial test position may be
applied to reduce the number of SAR measurements required for next to the ear, UMPC mini-tablet or hotspot mode
configurations with multiple test positions.
2.
For 2.4 GHz 802.11b DSSS, either the initial test position procedure for multiple exposure test positions or the
DSSS procedure for fixed exposure position is applied; these are mutually exclusive. For 2.4 GHz and 5 GHz OFDM
configurations, the initial test configuration is applied to measure SAR using either the initial test position procedure
for multiple exposure test position configurations or the initial test configuration procedures for fixed exposure test
conditions. Based on the reported SAR of the measured configurations and maximum output power of the
transmission mode configurations that are not included in the initial test configuration, the subsequent test
configuration and initial test position procedures are applied to determine if SAR measurements are required for the
remaining OFDM transmission configurations. In general, the number of test channels that require SAR
measurement is minimized based on maximum output power measured for the test sample(s).
3.
For OFDM transmission configurations in the 2.4 GHz and 5 GHz bands, When the same maximum power is
specified for multiple transmission modes in a frequency band, the largest channel bandwidth, lowest order
modulation, lowest data rate and lowest order 802.11a/g/n/ac mode is used for SAR measurement, on the highest
measured output power channel for each frequency band.
4.
DSSS and OFDM configurations are considered separately according to the required SAR procedures. SAR is
measured in the initial test position using the 802.11 transmission mode configuration required by the DSSS
procedure or initial test configuration and subsequent test configuration(s) according to the OFDM procedures.18
The initial test position procedure is described in the following:
a. When the reported SAR of the initial test position is ≤ 0.4 W/kg, further SAR measurement is not required for
the other test positions in that exposure configuration and 802.11 transmission mode combinations within the
frequency band or aggregated band.
b. When the reported SAR of the test position is > 0.4 W/kg, SAR is repeated for the 802.11 transmission mode
configuration tested in the initial test position to measure the subsequent next closet/smallest test separation
distance and maximum coupling test position on the highest maximum output power channel, until the report
SAR is ≤ 0.8 W/kg or all required test position are tested.
c. For all positions/configurations, when the reported SAR is > 0.8 W/kg, SAR is measured for these test
positions/configurations on the subsequent next highest measured output power channel(s) until the reported
SAR is ≤ 1.2 W/kg or all required channels are tested.
<2.4GHz WLAN>
Mode
802.11b 1Mbps
2.4GHz WLAN
Antenna 1+2
802.11g 6Mbps
802.11n-HT20 MCS0
802.11n-HT40 MCS0
SPORTON INTERNATIONAL INC.
TEL : 886-3-327-3456 / FAX : 886-3-328-4978
FCC ID : SWX-UINS
Channel
Frequency
(MHz)
Average power
(dBm)
Tune-Up
Limit
11
11
11
2412
2437
2462
2412
2437
2462
2412
2437
2462
2422
2437
2452
21.57
21.12
19.63
21.23
24.44
21.64
21.21
24.40
21.04
18.88
23.13
19.36
22.00
21.50
21.50
21.50
24.50
22.00
21.50
24.50
21.50
19.50
23.50
19.50
Page 19 of 24
Duty Cycle %
99.82
98.58
98.94
99.11
Issued Date : Apr. 17, 2017
Form version. : 170125
FCC SAR Test Report
Report No. : FA732334
12. Bluetooth Exclusions Applied
Mode Band
Average power(dBm)
LE
2.4GHz Bluetooth
0.5
Note:
1. Per KDB 447498 D01v06, the 1-g and 10-g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation
distances ≤ 50 mm are determined by:
[(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)] ·[√f(GHz)] ≤ 3.0 for
1-g SAR and ≤ 7.5 for 10-g extremity SAR

f(GHz) is the RF channel transmit frequency in GHz

Power and distance are rounded to the nearest mW and mm before calculation

The result is rounded to one decimal place for comparison
Bluetooth Max Power (dBm)
Separation Distance (mm)
Frequency (GHz)
exclusion thresholds
0.5
<5
2.48
0.31
Note:
Per KDB 447498 D01v06, when the minimum test separation distance is < 5 mm, a distance of 5 mm is applied to
determine SAR test exclusion. The test exclusion threshold is 0.31 which is <= 3, SAR testing is not required.
13. Antenna Location
BT
Antenna
WLAN
Antenna 1
WLAN
Antenna 2
Front View
SPORTON INTERNATIONAL INC.
TEL : 886-3-327-3456 / FAX : 886-3-328-4978
FCC ID : SWX-UINS
Page 20 of 24
Issued Date : Apr. 17, 2017
Form version. : 170125
FCC SAR Test Report
Report No. : FA732334
14. SAR Test Results
General Note:
1.
Per KDB 447498 D01v06, the reported SAR is the measured SAR value adjusted for maximum tune-up tolerance.
a. Tune-up scaling Factor = tune-up limit power (mW) / EUT RF power (mW), where tune-up limit is the maximum rated
power among all production units.
b. For SAR testing of WLAN signal with non-100% duty cycle, the measured SAR is scaled-up by the duty cycle scaling
factor which is equal to "1/(duty cycle)"
c. For WLAN: Reported SAR(W/kg)= Measured SAR(W/kg)* Duty Cycle scaling factor * Tune-up scaling factor
2. Per KDB 447498 D01v06, for each exposure position, testing of other required channels within the operating mode of a
frequency band is not required when the reported 1-g or 10-g SAR for the mid-band or highest output power channel is:
 ≤ 0.8 W/kg or 2.0 W/kg, for 1-g or 10-g respectively, when the transmission band is ≤ 100 MHz
 ≤ 0.6 W/kg or 1.5 W/kg, for 1-g or 10-g respectively, when the transmission band is between 100 MHz and 200 MHz
 ≤ 0.4 W/kg or 1.0 W/kg, for 1-g or 10-g respectively, when the transmission band is ≥ 200 MHz
WLAN Note:
1. Per KDB 248227 D01v02r02, for 2.4GHz 802.11g/n SAR testing is not required when the highest reported SAR for DSSS is
adjusted by the ratio of OFDM to DSSS specified maximum output power and the adjusted SAR is ≤ 1.2 W/kg.
2. When the reported SAR of the test position is > 0.4 W/kg, SAR is repeated for the 802.11 transmission mode configuration
tested in the initial test position to measure the subsequent next closet/smallest test separation distance and maximum
coupling test position on the highest maximum output power channel, until the report SAR is ≤ 0.8 W/kg or all required test
position are tested.
3. For all positions / configurations, when the reported SAR is > 0.8 W/kg, SAR is measured for these test positions /
configurations on the subsequent next highest measured output power channel(s) until the reported SAR is ≤ 1.2 W/kg or all
required channels are tested.
4. During SAR testing the WLAN transmission was verified using a spectrum analyzer.
14.1 Body-worn SAR

Duty
Average Tune-Up Tune-up Duty
Power Measured Reported
Test
Gap
Freq.
Cycle
Band
Mode
Antenna Ch.
Power
Limit Scaling Cycle
Drift 1g SAR 1g SAR
Position (mm)
(MHz)
Scaling
(dBm) (dBm) Factor
(dB)
(W/kg)
(W/kg)
Factor
01 WLAN2.4GHz 802.11b 1Mbps Front 0mm
1+2
1 2412 21.57
22.00
1.104 99.82 1.002 -0.16
0.583
0.645
Plot
No.
WLAN2.4GHz 802.11b 1Mbps
Front
0mm
1+2
2437
21.12
21.50
1.091
99.82 1.002
-0.14
0.540
0.591
WLAN2.4GHz 802.11b 1Mbps
Front
0mm
1+2
11 2462
19.63
21.50
1.538
99.82 1.002
-0.18
0.375
0.578
WLAN2.4GHz 802.11b 1Mbps
Back
0mm
1+2
21.57
22.00
1.104
99.82 1.002
-0.15
0.053
0.059
2412
Test Engineer: Nick Yu.
SPORTON INTERNATIONAL INC.
TEL : 886-3-327-3456 / FAX : 886-3-328-4978
FCC ID : SWX-UINS
Page 21 of 24
Issued Date : Apr. 17, 2017
Form version. : 170125
FCC SAR Test Report
Report No. : FA732334
15. Uncertainty Assessment
The component of uncertainly may generally be categorized according to the methods used to evaluate them. The
evaluation of uncertainly by the statistical analysis of a series of observations is termed a Type An evaluation of
uncertainty. The evaluation of uncertainty by means other than the statistical analysis of a series of observation is
termed a Type B evaluation of uncertainty. Each component of uncertainty, however evaluated, is represented by an
estimated standard deviation, termed standard uncertainty, which is determined by the positive square root of the
estimated variance.
A Type A evaluation of standard uncertainty may be based on any valid statistical method for treating data. This
includes calculating the standard deviation of the mean of a series of independent observations; using the method of
least squares to fit a curve to the data in order to estimate the parameter of the curve and their standard deviations; or
carrying out an analysis of variance in order to identify and quantify random effects in certain kinds of measurement.
A type B evaluation of standard uncertainty is typically based on scientific judgment using all of the relevant
information available. These may include previous measurement data, experience, and knowledge of the behavior
and properties of relevant materials and instruments, manufacture’s specification, data provided in calibration reports
and uncertainties assigned to reference data taken from handbooks. Broadly speaking, the uncertainty is either
obtained from an outdoor source or obtained from an assumed distribution, such as the normal distribution,
rectangular or triangular distributions indicated in table below.
Uncertainty Distributions
Multi-plying Factor
(a)
Normal
1/k
(b)
Rectangular
Triangular
U-Shape
1/√
1/√6
1/√
(a) standard uncertainty is determined as the product of the multiplying factor and the estimated range of
variations in the measured quantity
(b) κ is the coverage factor
Table 14.1. Standard Uncertainty for Assumed Distribution
The combined standard uncertainty of the measurement result represents the estimated standard deviation of the
result. It is obtained by combining the individual standard uncertainties of both Type A and Type B evaluation using
the usual “root-sum-squares” (RSS) methods of combining standard deviations by taking the positive square root of
the estimated variances.
Expanded uncertainty is a measure of uncertainty that defines an interval about the measurement result within which
the measured value is confidently believed to lie. It is obtained by multiplying the combined standard uncertainty by a
coverage factor. Typically, the coverage factor ranges from 2 to 3. Using a coverage factor allows the true value of a
measured quantity to be specified with a defined probability within the specified uncertainty range. For purpose of this
document, a coverage factor two is used, which corresponds to confidence interval of about 95 %. The DASY
uncertainty Budget is shown in the following tables.
SPORTON INTERNATIONAL INC.
TEL : 886-3-327-3456 / FAX : 886-3-328-4978
FCC ID : SWX-UINS
Page 22 of 24
Issued Date : Apr. 17, 2017
Form version. : 170125
FCC SAR Test Report
Error Description
Uncertainty
Value
(±%)
Report No. : FA732334
Probability
Measurement System
Probe Calibration
7.00
Axial Isotropy
4.70
Hemispherical Isotropy
9.60
Boundary Effects
2.00
Linearity
4.70
System Detection Limits
1.00
Modulation Response
4.68
Readout Electronics
0.30
Response Time
0.00
Integration Time
2.60
RF Ambient Noise
3.00
RF Ambient Reflections
3.00
Probe Positioner
0.40
Probe Positioning
6.70
Max. SAR Eval.
4.00
Test Sample Related
Device Positioning
3.03
Device Holder
3.60
Power Drift
5.00
Power Scaling
0.00
Phantom and Setup
Phantom Uncertainty
6.60
SAR correction
0.00
Liquid Conductivity Repeatability
0.03
Liquid Conductivity (target)
5.00
Liquid Conductivity (mea.)
2.50
Temp. unc. - Conductivity
3.68
Liquid Permittivity Repeatability
0.02
Liquid Permittivity (target)
5.00
Liquid Permittivity (mea.)
2.50
Temp. unc. - Permittivity
0.84
Combined Std. Uncertainty
Coverage Factor for 95 %
Expanded STD Uncertainty
Divisor
(Ci)
1g
(Ci)
10g
Standard
Uncertainty
(1g) (±%)
Standard
Uncertainty
(10g) (±%)
1.732
1.732
1.732
1.732
1.732
1.732
1.732
1.732
1.732
1.732
1.732
1.732
1.732
0.7
0.7
0.7
0.7
7.0
1.9
3.9
1.2
2.7
0.6
2.7
0.3
0.0
1.5
1.7
1.7
0.2
3.9
2.3
7.0
1.9
3.9
1.2
2.7
0.6
2.7
0.3
0.0
1.5
1.7
1.7
0.2
3.9
2.3
1.732
1.732
3.0
3.6
2.9
0.0
3.0
3.6
2.9
0.0
1.732
1.732
1.732
1.732
1.732
1.732
1.732
1.732
0.78
0.78
0.78
0.78
0.23
0.23
0.23
0.23
0.84
0.71
0.71
0.71
0.71
0.26
0.26
0.26
0.26
3.8
0.0
0.0
2.3
1.1
1.7
0.0
0.7
0.3
0.1
12.9%
K=2
25.9%
3.8
0.0
0.0
2.0
1.0
1.5
0.0
0.8
0.4
0.1
12.9%
K=2
25.8%
Table 14.2. Uncertainty Budget for frequency range 3 GHz to 6 GHz
SPORTON INTERNATIONAL INC.
TEL : 886-3-327-3456 / FAX : 886-3-328-4978
FCC ID : SWX-UINS
Page 23 of 24
Issued Date : Apr. 17, 2017
Form version. : 170125
FCC SAR Test Report
Report No. : FA732334
16. References
[1]
FCC 47 CFR Part 2 “Frequency Allocations and Radio Treaty Matters; General Rules and
Regulations”
[2]
ANSI/IEEE Std. C95.1-1992, “IEEE Standard for Safety Levels with Respect to Human Exposure
to Radio Frequency Electromagnetic Fields, 3 kHz to 300 GHz”, September 1992
[3]
IEEE Std. 1528-2013, “IEEE Recommended Practice for Determining the Peak Spatial-Average
Specific Absorption Rate (SAR) in the Human Head from Wireless Communications Devices:
Measurement Techniques”, Sep 2013
[4]
SPEAG DASY System Handbook
[5]
FCC KDB 248227 D01 v02r02, “SAR Guidance for IEEE 802.11 (WiFi) Transmitters”, Oct 2015.
[6]
FCC KDB 447498 D01 v06, “Mobile and Portable Device RF Exposure Procedures and
Equipment Authorization Policies”, Oct 2015
[7]
FCC KDB 941225 D07 v01r02, " SAR Evaluation Procedures for UMPC Mini-Tablet Devices", Oct
2015.
[8]
FCC KDB 865664 D01 v01r04, "SAR Measurement Requirements for 100 MHz to 6 GHz", Aug
2015.
[9]
FCC KDB 865664 D02 v01r02, “RF Exposure Compliance Reporting and Documentation
Considerations” Oct 2015.
SPORTON INTERNATIONAL INC.
TEL : 886-3-327-3456 / FAX : 886-3-328-4978
FCC ID : SWX-UINS
Page 24 of 24
Issued Date : Apr. 17, 2017
Form version. : 170125
FCC SAR Test Report
Appendix A.
Report No. : FA732334
Plots of System Performance Check
The plots are shown as follows.
SPORTON INTERNATIONAL INC.
TEL : 886-3-327-3456 / FAX : 886-3-328-4978
FCC ID : SWX-UINS
Page A1 of A1
Issued Date : Apr. 17, 2017
Form version. : 170125
Test Laboratory: Sporton International Inc. SAR/HAC Testing Lab
Date: 2017/3/29
System Check_Body_2450MHz
DUT: D2450V2­736
Communication System: CW ; Frequency: 2450 MHz;Duty Cycle: 1:1
Medium: MSL_2450_170329 Medium parameters used: f = 2450 MHz; σ = 1.984 S/m; εr = 53.807;
ρ = 1000 kg/m3
A i T
:23.5 ℃; Li i T
:22.5 ℃
DASY5 Configuration
­ Probe: EX3DV4 ­ SN3931; ConvF(7.73, 7.73, 7.73); Calibrated: 2016/10/3;
­ Sensor­Surface: 1.4mm (Mechanical Surface Detection)
­ Electronics: DAE3 Sn577; Calibrated: 2016/9/28
­ Phantom: SAM_Left; Type: QD000P40CD; Serial: S/N:1796
­ Measurement SW: DASY52, Version 52.8 (8); SEMCAD X Version 14.6.10 (7373)
Pin=250mW/Area Scan (61x61x1): Interpolated grid: dx=1.200 mm, dy=1.200 mm
Maximum value of SAR (interpolated) = 22.5 W/kg
Pin=250mW/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm
Reference Value = 103.2 V/m; Power Drift = ­0.05 dB
Peak SAR (extrapolated) = 27.0 W/kg
SAR(1 g) = 13.4 W/kg; SAR(10 g) = 6.27 W/kg
Maximum value of SAR (measured) = 22.0 W/kg
0 dB = 22.0 W/kg = 13.42 dBW/kg
FCC SAR Test Report
Appendix B.
Report No. : FA732334
Plots of SAR Measurement
The plots are shown as follows.
SPORTON INTERNATIONAL INC.
TEL : 886-3-327-3456 / FAX : 886-3-328-4978
FCC ID : SWX-UINS
Page B1 of B1
Issued Date : Apr. 17, 2017
Form version. : 170125
Test Laboratory: Sporton International Inc. SAR/HAC Testing Lab
Date: 2017/3/29
#01_WLAN2.4GHz_802.11b 1Mbps_Front_0mm_Ch1;Antenna 1+2
Communication System: 802.11b; Frequency: 2412 MHz;Duty Cycle: 1:1.002
Medium: MSL_2450_170329 Medium parameters used: f = 2412 MHz; σ = 1.929 S/m; εr = 53.952;
ρ = 1000 kg/m3
A i T
:23.5 ℃; Li i T
:22.5 ℃
DASY5 Configuration
­ Probe: EX3DV4 ­ SN3931; ConvF(7.73, 7.73, 7.73); Calibrated: 2016/10/3;
­ Sensor­Surface: 1.4mm (Mechanical Surface Detection)
­ Electronics: DAE3 Sn577; Calibrated: 2016/9/28
­ Phantom: SAM_Left; Type: QD000P40CD; Serial: S/N:1796
­ Measurement SW: DASY52, Version 52.8 (8); SEMCAD X Version 14.6.10 (7373)
Area Scan (61x101x1): Interpolated grid: dx=1.200 mm, dy=1.200 mm
Maximum value of SAR (interpolated) = 1.81 W/kg
Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm
Reference Value = 23.20 V/m; Power Drift = ­0.16 dB
Peak SAR (extrapolated) = 1.71 W/kg
SAR(1 g) = 0.583 W/kg; SAR(10 g) = 0.228 W/kg
Maximum value of SAR (measured) = 1.23 W/kg
0 dB = 1.23 W/kg = 0.90 dBW/kg
FCC SAR Test Report
Appendix C.
Report No. : FA732334
DASY Calibration Certificate
The DASY calibration certificates are shown as follows.
SPORTON INTERNATIONAL INC.
TEL : 886-3-327-3456 / FAX : 886-3-328-4978
FCC ID : SWX-UINS
Page C1 of C1
Issued Date : Apr. 17, 2017
Form version. : 170125
_
a....._~
'1!!!!TTL
In Collaboration with
P e
CALIBRATION LABORATORY
Add: No.51 Xueyuan Road, Haidian District, Beijing, 100191, China
Tel: +86-10-62304633-2079
Fax: +86-10-62304633-2504
E-mail: [email protected]
Http://www.chinattl.cn
Certificate No:
Sporton_TW
Client
216-97130
CALIBRATION CERTIFICATE
Object
D2450V2 - SN: 736
Calibration Procedure(s)
FD-211-2-003-01
Calibration Procedures for dipole validation kits
Calibration date:
August 30, 2016
This calibration Certificate documents the traceability to national standards, which realize the physical units of
measurements(SI}. The measurements and the uncertainties with confidence probability are given on the following
pages and are part of the certificate.
All calibrations have been conducted in the closed laboratory facility: environment temperature(22±3)'C and
humidity<70%.
Calibration Equipment used (M&TE critical for calibration)
Primary Standards
ID#
Cal Date(Calibrated by, Certificate No.)
Scheduled Calibration
101919
01 -Jul-15 (CTTL, No.J15X04256)
Jun-16
101547
01 -Jul-15 (CTTL, No.J15X04256)
Jun-16
Reference Probe EX3DV4
SN 3801
29-Jun-16(SPEAG, No. EX3-3801 _Jun 16)
Jun- 17
DAE4
SN 777
22-Aug-16(CTTL-SPEAG, No.Z16-97138)
Aug-17
Secondary Standards
ID#
Cal Date(Calibrated by, Certificate No.)
Signal Generator E4438C
MY49071430
01 -Feb-16 (CTTL, No.J16X00893)
Jan- 17
Network Analyzer E5071 C
MY46110673
26-Jan-16 (CTTL, No.J16X00894)
Jan- 17
Power Meter
Power sensor
NRP2
NRP-Z91
Name
Scheduled Calibration
Function
Signature
~!J
Calibrated by:
Zhao Jing
SAR Test Engineer
Reviewed by:
Qi Dianyuan
SAR Project Leader
Approved by:
Lu Bingsong
Deputy Director of the laboratory
セ@
セ@
セ@
{-z
Issued: Septem~r -1. 2016
This calibration certificate shall not be reproduced except in full without written approval of the laboratory.
Certificate No: 216-97130
Page I of8
,!1!11!!11.1111...
zu......._....
-<
In Collaboration with
- TTL s p e a g
CALIBRATION LABORATORY
Add: No.51 Xueyuan Road, Haidian District, Beijing, 100191, China
Tel: +86-1 0-62304633-2079
Fax: +86- 10-62304633-2504
E-mail: [email protected]
Http://www.chinattl.cn
Glossary:
TSL
ConvF
N/A
tissue simulating liquid
sensitivity in TSL / NORMx, y,z
not applicable or not measured
Calibration is Performed According to the Following Standards :
a) IEEE Std 1528-201 3, "IEEE Recommended Practice for Determining the Peak
Spatial-Averaged Specific Absorption Rate (SAR) in the Human Head from Wireless
Communications Devices: Measurement Techniques", June 201 3
b) IEC 62209-1, "Procedure to measure the Specific Absorption Rate (SAR) For hand-held
devices used in close proximity to the ear (frequency range of 300MHz to 3GHz)", February
2005
c) IEC 62209-2, "Procedure to measure the Specific Absorption Rate (SAR) For wireless
communication devices used in close proximity to the human body (frequency range of
30MHz to 6GHz)", March 2010
d) KDB865664, SAR Measurement Requirements for 100 MHz to 6 GHz
Additional Documentation:
e) DASY4/5 System Handbook
Methods Applied and Interpretation of Parameters:
•
Measurement Conditions: Further details are available from the Validation Report at the end
of the certificate. All figures stated in the certificate are valid at the frequency indicated.
• Antenna Parameters with TSL: The dipole is mounted with the spacer to position its feed
point exactly below the center marking of the flat phantom section, with the arms oriented
parallel to the body axis.
• Feed Point Impedance and Return Loss: These parameters are measured with the dipole
positioned under the liquid filled phantom. The impedance stated is transformed from the
measurement at the SMA connector to the feed point. The Return Loss ensures low
reflected power. No uncertainty required.
• Electrical Delay: One-way delay between the SMA connector and the antenna feed point.
No uncertainty required.
• SAR measured: SAR measured at the stated antenna input power.
•
SAR normalized: SAR as measured, normalized to an input power of 1 W at the antenna
connector.
•
SAR for nominal TSL parameters: The measured TSL parameters are used to calculate the
nominal SAR result.
The reported uncertainty of measurement is stated as the standard uncertainty of
Measurement multiplied by the coverage factor k=2, which for a normal distribution
Corresponds to a coverage probability of approximately 95%.
Certificate No: Z16-97130
Page 2 of8
In Collaboration with
a g
CALIBRATION LABORATORY
Add: No.51 Xueyuan Road, Haidian District, Beijing, 100191 , China
Tel: +86-10-62304633-2079
Fax: +86-10-62304633-2504
E-mail: [email protected]
Http://www.chinattl.cn
Measurement Conditions
DASY system confi1aurat1on, as f ar as not a1ven on oaae 1
DASY Version
DASY52
Extrapolation
Advanced Extrapolation
Phantom
Triple Flat Phantom 5.1 C
Distance Dipole Center - TSL
52.8.8.1258
10mm
with Spacer
Zoom Scan Resolution
dx, dy, dz = 5 mm
Frequency
2450 MHz ± 1 MHz
Head TSL parameters
The fo IIowing
. parameters and caIcu Ia ions were aoor1ed .
Temperature
Nominal Head TSL parameters
22.0 °C
Measured Head TSL parameters
<1.0 °C
---Condition
g) of Head TSL
SAR for nominal Head TSL parameters
13.3 mW/ g
53.1 mW lg
normalized to 1W
± 20.8 % (k=2)
Condition
(10 g) of Head TSL
SAR measured
6.24 mW/ g
250 mW input power
SAR for nominal Head TSL parameters
Body TSL parameters
1.81 mho/m ± 6 %
----
250 mW input power
cm 3
Conductivity
1.80 mho/m
39.5 ±6 %
SAR measured
SAR averaged over 10
39.2
(22.0 ± 0.2) °C
Head TSL temperature change during test
SAR result with Head TSL
SAR averaged over 1 cm (1
Permittivity
25.0 mW lg ± 20.4 % (k=2)
normalized to 1W
The fo II owma
. oarameters and caIcu Ia ions were aoo11e
r d.
Temperature
Nominal Body TSL parameters
52.0 ±6 %
<1.0 °C
----
g) of Body TSL
SAR measured
SAR averaged over 10
cm 3
normalized to 1W
(10 g) of Body TSL
SAR measured
Certificate No: 216-97130
normalized to 1W
Page 3 of8
---
13.0mW/g
52.1 mW lg ± 20.8 % (k=2)
Condition
250 mW input power
SAR for nominal Body TSL parameters
1.93 mho/m ±6 %
Condition
250 mW input power
SAR for nominal Body TSL parameters
Conductivity
1.95 mho/m
(22.0 ± 0..2) °C
Body TSL temperature change during test
SAR resu It WI"th BOdIV TSL
SAR averaged over 1 cm (1
52.7
22.0 °C
Measured Body TSL parameters
Permittivity
6.10 mW/ g
24.4 mW lg
± 20.4 % (k=2)
-~
TTL s
In Collaboration with
a g
CALIBRATION LABORATORY
Add: No.SJ Xucyuan Road, llaidian District, Beijing, 100191 , China
Tel: +86-I0-62304633-2079
Fax: +86-10-62304633-2504
E-mail: [email protected]
Http://www.chinattl.cn
Appendix
Antenna Parameters with Head TSL
52.50+ 4.99j0
Impedance, transformed to feed point
- 25.3dB
Return Loss
Antenna Parameters with Body TSL
48.00+ 4.65j0
Impedance, transformed to feed point
- 25.7dB
Return Loss
General Antenna Parameters and Design
Electrical Delay (one direction)
1.053 ns
After long term use with 1OOW radiated power, only a slight warming of the dipole near the feedpoint can
be measured.
The dipole is made of standard semirigid coaxial cable. The center conductor of the feeding line is directly
connected to the second arm of the dipole. The antenna is therefore short-circuited for DC-signals. On some
of the dipoles, small end caps are added to the dipole arms in order to improve matching when loaded
according to the position as explained in the "Measurement Conditions" paragraph. The SAR data are not
affected by this change. The overall dipole length is still according to the Standard .
No excessive force must be applied to the dipole arms, because they might bend or the soldered
connections near the feedpoint may be damaged.
Additional EUT Data
I Manufactured by
Certificate No: 216-97130
SPEAG
Page 4 of8
2'セ@
fJ!!!!! TTL
""'liiiiliiil_ _.~_,
In Collaboration with
CALIBRATION LABORATORY
Add: No.51 Xueyuan Road, llaidian District, Beijing, 100191, China
Tel: +86-10-62304633-2079
Fax: +86-10-62304633-2504
E-mail: [email protected]
Http://www.chinattl.cn
DASYS Validation Report for Head TSL
Date: 08.30.2016
Test Laboratory: CTTL, Beijing, China
DUT: Dipole 2450 MHz; Type: D2450V2; Serial: D2450V2 - SN: 736
Communication System: UID 0, CW; Frequency: 2450 MHz; Duty Cycle: 1: 1
Medium parameters used: f = 2450 MHz; a = 1.812 Sim; er= 39.54; p = 1000 kg/m3
Phantom section: Right Section
Measurement Standard: DASY5 (IEEE/IEC/ANSI C63.19-2007)
DASY5 Configuration:
•
•
•
•
•
Probe: EX3DV4 - SN3801; ConvF(6.67, 6.67, 6.67); Calibrated: 6/29/2016;
Sensor-Surface: 2mm (Mechanical Surface Detection)
Electronics: DAE4 Sn777; Calibrated: 8/22/2016
Phantom: Triple Flat Phantom 5.lC; Type: QD 000 P51 CA; Serial: 1161/1
Measurement SW: DASY52, Version 52.8 (8); SEMCAD X Version 14.6.10 (7372)
Dipole Calibration/Zoom Scan (7x7x7) (7x7x7)/Cube 0: Measurement grid: dx=5mm,
dy=5mm,dz=5mm
Reference Value= 103.9 V/m; Power Drift = -0.03 dB
Peak SAR (extrapolated)= 26.9 W/kg
SAR(l g) = 13.3 W/kg; SAR(lO g) = 6.24 W/kg
Maximum value of SAR (measured)= 20.2 W/kg
dB
-4.23
-8.46
-1 2.69
-16.92
-21.15
0 dB = 20.2 W /kg = 13.05 dBW/kg
Certificate No: 216-97130
Page 5 of8
In Collaboration with
iiiiiiiTTL
a g
CALIBRATION LABORATORY
Add: No.51 Xueyuan Road, Haidian District, Beijing, 100191, China
Tel: +86-10-62304633-2079
Fax: +86-10-62304633-2504
Http://www.chinattl.cn
E-mail: [email protected]
Impedance Measurement Plot for Head TSL
Tr1 511 Log Ma g 10. 00dB/ Ref O.OOOdB [F1]
0 . 00 >1 2 . 4500000 GHZ -25 . 272 B
40 . 00
30 . 00
20 . 00
10. 00
0 . 000
-10 . 0 0
-20 . 00
-30.00
-40. 00
-50 . 00
~iii!! 511 smith (R+jx) scale 1. ooou [F1 Del]
>1
2.4500000 GHZ
52 . 519 Q
4 . 9945 Q
324 . 4
11 Start 2.25 GHz
Certificate No: Z16-97130
IFBW 100 Hz
Page 6 of8
Stop 2.65 §:jz_JBIT
....-
....... "
In Collaboration with
- TTL s p e a g
CALIBRATION LABORATORY
Add: No.SI Xucyuan Road, Haidian District, Beijing, 100191, China
Tel: +86-10-62304633-2079
Fax: +86-1 0-62304633-2504
Http://www.chinattl.cn
E-mail: [email protected]
DASY5 Validation Report for Body TSL
Date: 08.30.2016
Test Laboratory: CTTL, Beijing, China
DUT: Dipole 2450 MHz; Type: D2450V2; Serial: D2450V2 - SN: 736
Communication System: UID 0, CW; Frequency: 2450 MHz; Duty Cycle: 1: 1
Medium parameters used: f = 2450 MHz; a= 1.933 S/m; er= 51.96; p = 1000 kg/m3
Phantom section: Center Section
Measurement Standard: DASY5 (IEEE/IEC/ANSI C63.19-2007)
DASY5 Configuration:
•
•
•
•
•
Probe: EX3DV4 - SN3801; ConvF(6.88, 6.88, 6.88); Calibrated: 6/29/2016;
Sensor-Surface: 2mm (Mechanical Surface Detection)
Electronics: DAE4 Sn777; Calibrated: 8/22/2016
Phantom: Triple Flat Phantom 5. l C; Type: QD 000 P51 CA; Serial: 1161/1
Measurement SW: DASY52, Version 52.8 (8); SEMCAD X Version 14.6.10 (7372)
Dipole Calibration/Zoom Scan (7x7x7) (7x7x7)/Cube 0: Measurement grid: dx=5mm,
dy=5mm,dz=5mm
Reference Value= 95.98 V/m; Power Drift= 0.04 dB
Peak SAR (extrapolated) = 26.1 W/kg
SAR(l g) = 13 W/kg; SAR(lO g) = 6.1 W/kg
Maximum value of SAR (measured) = 19.6 W/kg
dB
-4.26
-8.52
-12.79
-17.05
-21.31
0 dB = 19.6 W/kg = 12.92 dBW/kg
Certificate No: 216-97130
Page 7 of 8
'
111TTL
i<
-#'
In Collaboration with
a g
CALIBRATION LABORATORY
Add: No.51 Xueyuan Road, Haidian District, Beijing, 100191, China
Tel: +86-10-62304633-2079
Fax: +86-10-62304633-2504
Http://www.chinaltl.cn
E-mail: [email protected]
Impedance Measurement Plot for Body TSL
Tr l Sll Log Mag 10. oode/ Ref o.ooode [F1]
5o. OO >l 2.4500000 GHZ -25 . 724 dB
40. 00
30 . 00
20 . 00
10. 00
0. 000
- 1 0. 00
- 20 . 00
-30 . 00
-4 0 . 0 0
- 50. 00
Sll smith (R+jx) scale 1 . ooou [Fl Del]
~ill!I
>l
2.4500000 GHZ
4 7.967 0
4.6491 0
302 . 0
11 start 2.25 GHz
Certificate No: Z l 6-97 130
JFBW 100 Hz
Page 8 of8
St op 2.65 GHz
Jilfi"
Calibration Laboratory of
Schmid & Partner
Engineering AG
Zeughausstrasse 43, 8004 Zurich, Switzerland
Schweizerischer Kalibrierdienst
Service suisse d'etalonnage
Servizio svizzero di taratura
Swiss Calibration Service
Accreditatio n No.:
Accredited by the Swiss Accreditation Service (SAS)
SCS 0108
The Swiss Accreditation Service is one of the signatories to the EA
Multilateral Agreement for the recognition of calibration certificates
Client
Sporton -TW (Auden)
Certificate No:
DAE3-577_Sep1 6
!CALIBRATION CERTIFICATE
Object
DAE3 - SD 000 0 03 AA - SN: 577
Calibration procedure(s)
QA CAL-06. v29
Calibration procedure for the data acquisition electronics (DAE)
Calibration date:
September 28, 2016
This calibration certificate documents the traceability to national standards, which realize the physical units of measurements (SI).
The measurements and the uncertainties with confidence probability are given on the following pages and are part of the certificate.
All calibrations have been conducted in the closed laboratory facility: environment temperature (22 ± 3)°C and humidity < 70%.
Calibration Equipment used (M&TE critical for calibration)
Primary Standards
Keithley Multimeter Type 2001
I SN: 0810278
Cal Date (Certificate No.)
Scheduled Calibration
09-Sep-16 (No:19065)
Sep-17
Secondary Standards
ID#
Check Date (in house)
Scheduled Check
Auto DAE Calibration Unit
SE UWS 053 AA 1001
05-Jan-16 (in house check)
In house check: Jan-17
Calibrator Box V2.1
SE UMS 006 AA 1002 05-Jan-16 (in house check)
In house check: Jan-17
Name
Function
Calibrated by:
Eric Hainfeld
Technician
Approved by:
Fin Bomholt
セ@
Signature
Deputy Technical Manager
Issued: September 28, 2016
This calibration certificate shall not be reproduced except in full without written approval of the laboratory.
Certificate No: DAE3-577_Sep16
Page 1 of 5
Calibration Laboratory of
Schmid & Partner
Engineering AG
Zeughausstrasse 43, 8004 Zurich, Switzerland
Schweizerischer Kalibrierdienst
Service suisse d'etalonnage
Servizio svizzero di taratura
Swiss Calibration Service
Accreditation No.:
Accredited by the Swiss Accreditation Service (SAS)
SCS 0108
The Swiss Accreditation Service is one of the signatories to the EA
Multilateral Agreement for the recognition of calibration certificates
Glossary
DAE
Connector angle
data acquisition electronics
information used in DASY system to align probe sensor X to the robot
coordinate system.
Methods Applied and Interpretation of Parameters
•
DC Voltage Measurement: Calibration Factor assessed for use in DASY system by
comparison with a calibrated instrument traceable to national standards. The figure given
corresponds to the full scale range of the voltmeter in the respective range.
•
Connector angle: The angle of the connector is assessed measuring the angle
mechanically by a tool inserted. Uncertainty is not required.
•
The following parameters as documented in the Appendix contain technical information as a
result from the performance test and require no uncertainty.
•
DC Voltage Measurement Linearity: Verification of the Linearity at + 10% and -10% of
the nominal calibration voltage. Influence of offset voltage is included in this
measurement.
•
Common mode sensitivity: Influence of a positive or negative common mode voltage on
the differential measurement.
•
Channel separation: Influence of a voltage on the neighbor channels not subject to an
input voltage.
•
AD Converter Values with inputs shorted: Values on the internal AD converter
corresponding to zero input voltage
•
Input Offset Measurement Output voltage and statistical results over a large number of
zero voltage measurements.
•
Input Offset Current: Typical value for information; Maximum channel input offset
current, not considering the input resistance.
•
Input resistance: Typical value for information: DAE input resistance at the connector,
during internal auto-zeroing and during measurement.
•
Low Battery Alarm Voltage: Typical value for information. Below this voltage, a battery
alarm signal is generated.
•
Power consumption: Typical value for information. Supply currents in various operating
modes.
Certificate No: DAE3-577_Sep16
Page 2 of 5
DC Voltage Measurement
AID - Converter Resolution nominal
6.1µV,
full range= -100 ... +300 mV
High Range:
1LSB =
61 nV ,
full range = -1.... ... +3mV
Low Range:
1LSB =
DASY measurement parameters: Auto Zero Time: 3 sec; Measuring time: 3 sec
High Range
403.533 ± 0.02% (k=2)
403.512 ± 0.02% (k=2)
403.819 ± 0.02% (k=2)
Low Range
3.92648 ± 1.50% (k=2)
3.94206 ± 1.50% (k=2)
3.96074 ± 1.50% (k=2)
Calibration Factors
Connector Angle
190.0 ° ± 1 °
Connector Angle to be used in DASY system
Certificate No: DAE3-577_Sep16
Page 3 of 5
Appendix (Additional assessments outside the scope of SCS0108)
1. DC Voltaae Linearity
High Range
Reading (µV)
Difference (µV)
Error(%)
ChannelX
+ Input
200038.14
2 .56
0 .00
ChannelX
+ Input
2001 0.51
5.45
0.03
ChannelX
- Input
-20002.01
3.17
-0.02
ChannelY
+ Input
200032.33
-3.18
-0.00
ChannelY
+ Input
20006.38
1.35
0.01
ChannelY
- Input
-20004.73
0.65
-0.00
Channel l
+ Input
200031.49
-4.11
-0.00
Channel l
+ Input
20005.92
0 .98
0.00
Channel l
- Input
-20007.03
-1.64
0.01
Reading (µV)
Difference (µV)
Low Range
Error(%)
Channel X
+ Input
2001.00
-0.10
-0.01
ChannelX
+ Input
201.47
0.40
0.20
ChannelX
- Input
-198.57
0.28
-0. 14
ChannelY
+ Input
2001 .38
0.31
0.02
ChannelY
+ Input
200.40
-0.54
-0.27
ChannelY
- Input
-199.63
-0.73
0.37
Channel l
+ Input
2000.35
-0.56
-0.03
Channel l
+ Input
199.97
-0.93
-0.46
Channel l
- Input
-200.50
-1.56
0.79
2. Common mode sensitivity
DASY measurement parameters: A uto Zero T ime: 3 sec; M easunnq time: 3 sec
Common mode
Input Voltage (mV)
ChannelX
ChannelY
Channell
High Range
Average Reading (µV)
Low Range
Average Reading (µV)
200
-2.76
-4.30
- 200
6.04
3.73
200
-14.29
-14.35
- 200
12.74
12.77
200
3.10
2.81
- 200
-5.90
-5.65
3. Channel separation
DASY measurement parameters: Auto Zero Time: 3 sec; Measuring time: 3 sec
Input Voltage (mV)
Channel X (µV)
Channel Y (µV)
Channel l (µV)
Channel X
200
-1 .07
-3.44
ChannelY
200
8.43
0.12
Channel Z
200
5.44
4.83
Certificate No: DAE3-577_Sep16
Page 4 of 5
4. AD-Converter Values with inputs shorted
DASY measurement parameters: A uto Z ero T,me: 3 sec; Measunng time: 3 sec
High Range (LSB)
Low Range (LSB)
ChannelX
16132
16062
ChannelY
16099
16321
Channel Z
161 16
15372
5. Input Offset Measurement
DASY measurement parameters: Auto Zero Time: 3 sec; Measuring time: 3 sec
Input 10MQ
Average (µV)
min. Offset (µV)
max. Offset (µV)
Std. Deviation
(11V)
ChannelX
0.37
-1.07
1.49
0.43
ChannelY
1.21
-0.41
3.21
0.59
ChannelZ
-1.38
-2.63
-0.30
0.45
6. Input Offset Current
Nominal Input circuitry offset current on all channels: <25fA
7. Input Res1stance (Typical values for information)
Zeroing (kOhm)
Measuring (MOhm)
Channel X
200
200
ChannelY
200
200
ChannelZ
200
200
8. Low Batterv Alarm Vo tage
Typical values
(Tvpical values for information)
Alarm Level (VDC)
Supply(+ Vee)
+7.9
Supply (- Vee)
-7.6
9. Power Consumotion (Typical values for information)
Typical values
Switched off (mA)
Stand by (mA)
Transmitting (mA)
Supply(+ Vee)
+0.01
+6
+14
Supply (- Vee)
- 0.01
-8
-9
Certificate No: DAE3-577_Sep1 6
Page 5 of 5
Calibratio n Laborator y of
Schmid & Partner
Engineering AG
Schweizerischer Kalibrierdienst
Service suisse d'etalonnage
Servizio svizzero di taratura
Swiss Calibration Service
Accredited by the Swiss Accreditation Service (SAS)
The Swiss Accreditation Service is one of the signatories to the EA
Multilateral Agreement for the recognition of calibration certificates
Accreditation No.:
Zeughausstrasse 43, 8004 Zurich, Switzerland
Client
Certificate No:
Sporton-TW (Auden)
SCS 0108
EX3-3931_ 0ct16
CALIBRATION CERTIFICATE
Object
Calibration procedure(s)
Calibration date:
EX3DV4 - SN:3931
QA CAL-01.v9, QA CAL-14.v4, QA CAL-23.vS, QA CAL-25.v6
Calibration procedure for dosimetric E-field probes
October 3, 2016
(SI).
This calibration certificate documents the traceability to national standards, which realize the physical units of measurements
certificate.
the
of
part
are
and
pages
following
the
on
given
are
probability
confidence
with
The measurements and the uncertainties
< 70% .
All calibrations have been conducted in the closed laboratory facility: environment temperature (22 ± 3)°C and humidity
Calibration Equipment used (M&TE critical for calibration)
Primary Standards
ID
Cal Date (Certificate No.)
Scheduled Calibration
Power meter NRP
SN: 104778
06-Apr-16 (No. 217-02288/02289)
Apr-17
Power sensor NRP-291
Power sensor NRP-291
SN: 103244
06-Apr-16 (No. 217-02288)
06-Apr-16 (No. 217-02289)
Apr-17
SN: 103245
Reference 20 dB Attenuator
SN: S5277 (20x)
05-Apr-1 6 (No. 217-02293)
Apr-17
Reference Probe ES3DV2
SN: 3013
Dec-16
DAE4
SN: 660
31 -Dec-15 (No. ES3-3013 Dec15)
23-Dec-15 (No. DAE4-660 Dec15)
Secondarv Standards
ID
Check Date (in house)
Scheduled Check
Power meter E4419B
SN: GB41293874
06-Apr-16 (in house check Jun-16)
06-Apr-1 6 (in house check Jun-16)
In house check: Jun-18
Apr-17
Powersensor E4412A
SN: MY41498087
PowersensorE 4412A
RF generator HP 8648C
SN: 000110210
SN: US3642U01700
06-Apr-1 6 (in house check Jun-16)
04-Aug-99 (in house check Jun-16)
Network Analyzer HP 8753E
SN: US37390585
18-0ct-01 (in house check Oct-15)
Name
Function
Calibrated by:
Michael Weber
Laboratory Technician
Approved by:
Katja Pokovic
Technical Manager
Dec-16
In house check: Jun-18
In house check: Jun-18
In house check: Jun-18
In house check: Oct-16
Signature
It/~
~4
Issued: October 4. 2016
This calibration certificate shall not be reproduced except in full without written approval of the laboratory.
Certificate No: EX3-3931 _0ct16
Page 1 of 38
Calibration Laboratory of
Schmid & Partner
Engineering AG
Zeughausstras se 43, 8004 Zurich, Switzerland
Accredited by the Swiss Accreditation Service (SAS)
The Swiss Accreditation Service is one of the signatories to the EA
Multilateral Agreement for the recognition of calibration certificates
Schweizerisch er Kalibrierdiens t
Service suisse d'etalonnage
Servizio svizzero di taratura
Swiss Calibration Service
Accreditation No.:
SCS 0108
Glossary:
TSL
NORMx,y,z
ConvF
DCP
CF
A,B,C,D
Polarization 

1800 MHz: R22 waveguide). NORMx,y,z are only intermediate values, i.e., the uncertainties of NORMx,y,z does not affect the E -field uncertainty inside TSL (see below ConvF). NORM(f)x,y,z = NORMx,y,z * frequency_response (see Frequency Response Chart). This linearization is implemented in DASY4 software versions later than 4.2. The uncertainty of the frequency response is included in the stated uncertainty of ConvF. DCPx,y,z: DCP are numerical linearization parameters assessed based on the data of power sweep with CW signal (no uncertainty required). DCP does not depend on frequency nor media. PAR: PAR is the Peak to Average Ratio that is not calibrated but determined based on the signal characteristics Ax,y,z; Bx,y,z; Cx,y,z; Dx,y,z; VRx,y,z: A, B, C, D are numerical linearization parameters assessed based on the data of power sweep for specific modulation signal. The parameters do not depend on frequency nor media. VR is the maximum calibration range expressed in RMS voltage across the diode. ConvF and Boundary Effect Parameters: Assessed in flat phantom using E-field (or Temperature Transfer Standard for f :s; 800 MHz) and inside waveguide using analytical field distributions based on power measuremen ts for f > 800 MHz. The same setups are used for assessment of the parameters applied for boundary compensatio n (alpha, depth) of which typical uncertainty values are given. These parameters are used in DASY4 software to improve probe accuracy close to the boundary. The sensitivity in TSL corresponds to NORMx,y,z * ConvF whereby the uncertainty corresponds to that given for ConvF. A frequency dependent ConvF is used in DASY version 4.4 and higher which allows extending the validity from ± 50 MHz to ± 100 MHz. Spherical isotropy (30 deviation from isotropy): in a field of low gradients realized using a flat phantom exposed by a patch antenna. Sensor Offset: The sensor offset corresponds to the offset of virtual measureme nt center from the probe tip (on probe axis). No tolerance required. Connector Angle: The angle is assessed using the information gained by determining the NORMx (no uncertainty required). Certificate No: EX3-3931_0c t16 Page 2 of 38 October 3, 2016 EX3DV4 - SN:3931 Probe EX3DV4 SN :3931 Manufactured: Repaired: Calibrated: July 24, 2013 September 27, 2016 October 3, 2016 Calibrated for DASY/E ASY Systems (Note: non-compatible with DASY2 system!) Certificate No: EX3-3931_0c t16 Page 3 of 38 October 3, 2016 EX3DV4- SN:3931 DASY/EASY .. Parameters of Probe: EX3DV4 - SN:3931 Basic Calibration Parameters Norm (uV/(V/m) DCP (mV)" Sensor X SensorY SensorZ Unc (k=2) 0.50 99.3 0.56 102.3 0.47 99.2 ± 10.1 % Modulation Calibration Parameters Communication System Name UID cw dB 0.0 0.0 0.0 dBvµV dB VR mV Unc" (k=2) 0.0 0.0 0.0 1.0 1.0 1.0 0.00 165.2 169.6 158.4 ±2.2 % Note: For details on UID parameters see Appendix. Sensor Model Parameters C2 C1 fF 39.73 59.82 54.23 fF 299.4 447.7 405.8 v-1 36.38 35.85 35.74 T1 ms.v - 2 13.81 21.83 19.34 T2 T3 ms.v - 1 1.099 1.546 1.491 ms 5.004 5.045 5.007 v-2 v-1 TS T6 0.1 19 0.719 0.433 0.351 0.472 0.514 1.005 1.007 1.005 T4 The reported uncertainty of measurement is stated as the standard uncertainty of measurement multiplied by the coverage factor k=2, which for a normal distribution corresponds to a coverage probability of approximately 95%. The uncertainties of Norm X,Y,Z do not affect the E2 -field uncertainty inside TSL (see Pages 5 and 6). Numerical linearization parameter: uncertainty not required. E Uncertainty is determined using the max. deviation from linear response applying rectangular distribution and is expressed for the square of the field value. Certificate No: EX3-3931 _0ct16 Page 4 of 38 October 3, 2016 EX3DV4- SN:3931 DASY/EASY - Parameters of Probe: EX3DV4 - SN:3931 Calibration Parameter Determined in Head Tissue Simulating Media f (MHz\ c Relative Permittivity F Conductivity ($/m\ F ConvF X ConvF Y ConvF Z AlphaG Depth G (mm\ Unc (k=2) 750 41.9 0.89 10.68 10.68 10.68 0.47 0.86 ± 12.0 % 835 41.5 0.90 10.35 10.35 10.35 0.43 0.80 + 12.0 % 900 41.5 0.97 10.09 10.09 10.09 0.44 0.86 + 12.0 % 1450 40.5 1.20 8.73 8.73 8.73 0.45 0.80 ± 12.0 % 1750 40.1 1.37 8.68 8.68 8.68 0.37 0.80 ± 12.0 % 1900 40.0 1.40 8.42 8.42 8.42 0.34 0.80 + 12.0 % 2000 40.0 1.40 8.43 8.43 8.43 0.37 0.80 ± 12.0 % 2300 39.5 1.67 7.94 7.94 7.94 0.28 0.86 + 12.0 % 2450 39.2 1.80 7.60 7.60 7.60 0.36 0.84 + 12.0 % 2600 39.0 1.96 7.37 7.37 7.37 0.31 0.97 ± 12.0 % 5250 35.9 4.71 5.38 5.38 5.38 0.35 1.80 ± 13.1 % 5600 35.5 5.07 4.68 4.68 4.68 0.40 1.80 + 13.1 % 5750 35.4 5.22 4.84 4.84 4.84 0.40 1.80 ± 13.1 % c Frequency validity above 300 MHz of± 100 MHz only applies for DASY v4.4 and higher (see Page 2), else it is restricted to± 50 MHz. The uncertainty is the RSS of the ConvF uncertainty at calibration frequency and the uncertainty for the indicated frequency band. Frequency validity below 300 MHz is± 10, 25, 40. 50 and 70 MHz for ConvF assessments at 30, 64, 128, 150 and 220 MHz respectively. Above 5 GHz frequency validity can be extended to± 110 MHz. F At frequencies below 3 GHz, the validity of tissue parameters (sand er) can be relaxed to± 10% if liquid compensation formula is applied to measured SAR values. At frequencies above 3 GHz, the validity of tissue parameters (e and er) is restricted to ± 5%. The uncertainty is the RSS of the ConvF uncertainty for indicated target tissue parameters. G Alpha/Depth are determined during calibration. SPEAG warrants that the remaining deviation due to the boundary effect after compensation is always less than ± 1% for frequencies below 3 GHz and below ± 2% for frequencies between 3-6 GHz at any distance larger than half the probe tip diameter from the boundary. Certificate No: EX3-3931 _0ct16 Page 5 of 38 October 3, 2016 EX3DV4- SN:3931 DASY/EASY - Parameters of Probe: EX3DV4 - SN:3931 Calibration Paramete r Determine d in Body Tissue Simulating Media f (MHz) c Relative Permittivity F Conductivity (S/m) F ConvF X ConvF Y ConvF Z AlphaG Depthu (mm) Unc (k=2) 750 55.5 0.96 10.37 10.37 10.37 0.38 0.97 ± 12.0 % 835 55.2 0.97 10.14 10.14 10.14 0.36 0.99 ± 12.0 % 1450 54.0 1.30 8.53 8.53 8.53 0.31 0.80 ± 12.0 % 1750 53.4 1.49 8.45 8.45 8.45 0.37 0.80 ± 12.0 % 1900 53.3 1.52 8.14 8.14 8.14 0.33 0.90 ± 12.0 % 2300 52.9 1.81 7.96 7.96 7.96 0.39 0.80 ± 12.0 % 2450 52.7 1.95 7.73 7.73 7.73 0.38 0.85 ± 12.0 % 2600 52.5 2.16 7.46 7.46 7.46 0.25 0.95 ± 12.0 % 5250 48.9 5.36 4.57 4.57 4.57 0.50 1.90 ± 13.1 % 5600 48.5 5.77 3.71 3.71 3.71 0.60 1.90 ± 13.1 % 5750 48.3 5.94 4.01 4.01 4.01 0.60 1.90 ± 13.1 % restricted to ± 50 MHz. The c Frequency validity above 300 MHz of± 100 MHz only applies for DASY v4.4 and higher (see Page 2), else it is band. Frequency validity frequency indicated the for uncertainty the and frequency calibration at uncertainty ConvF the of RSS the is uncertainty 5 GHz frequency Above respectively. MHz 220 and 150 128, 64, 30, at assessments ConvF for MHz below 300 MHz is± 10, 25, 40, 50 and 70 validity can be extended to ± 110 MHz. to± 10% if liquid compensation formula is applied to F At frequencies below 3 GHz, the validity of tissue parameters (E and er) can be relaxed and er) is restricted to± 5%. The uncertainty is the RSS of (e parameters tissue of validity the GHz, above frequencies measured SAR values. At the ConvF uncertainty for indicated target tissue parameters. deviation due to the boundary effect after compensation is G Alpha/Depth are determined during calibration. SPEAG warrants that the remaining larger than half the probe tip always less than± 1% for frequencies below 3 GHz and below± 2% for frequencies between 3-6 GHz at any distance diameter from the boundary. Certificate No: EX3-3931_0c t16 Page 6 of 38 October 3, 2016 EX3DV4- SN:3931 Frequency Response of E-Field (TEM-Cell:ifi110 EXX, Waveguide: R22) 1.5 .. .. .. -------------------------·-··----------······...·····················--------.. .... ·-·······················--·---···-·······----------·-----······----.. .. .. .. .. ... .... .. .. -- -- ........... -- ......... -....... ------ ... - - -.- - -- -- -- ---- ... ------- ...... ··- -- .............. -~ ··- --. -· --- ... ···- ... -, ----. -- .. -- ... -- -- ..... .. -.. . .. ... .. •f • • • •• •• •• •• • • ••• • -!• •• • • • 1.4 -----········-······---.------·-····-···----·-·, .' ·················-----.--------·-·············.-------·-·············,·····················-. .' ..-----! ,-.. -0 1.3 (I) -~ ro 1.2 L.. E. 1.1 Q.) 1/) C: a. 1.0 セ@ C: Q.) ::, O" • • • ,,,• • o OO ---~--- •• •• ••• OO O• O~ - • • • • • ~ - •• • • • • •• • • • • • • • •• • • • • • .......................l...~-·-~=----~--j···=···········---T·-··~·-·-~.....L 0.9 ... .. ... .. .... • • • _._ i . . . . . . . . . . ;. . .. i L ....' ...'' . ... -· -... ----· .... -~--------· .......... : 0.8 ........ -- ·-. ---- . -·---~ ........... -- . ------ . -·:.·- .......... -- .. ---- --~' -.......... ···-· ..... --~--. セ@ LL 'I • • • • •• •• •• ••• A • • •• • •• -~•••• ••••• OO••••••• • • • • •:- • • • • • • • •• •• • •• •• • • • • • 1/) ()' 'I 0.7 0.6 ..... .... ... .. .' ................................................ ........... ..... ......... . 4••· .._ ... ........................................ .. .. .. · · · · ·····-·········- ...-·-··· ..' .' .' .' .... .. ----·-··· -·············"'' ······ ··· ··············'"················ ···· ···-- -----·-··············"'····· ······· ···--·····4··········-------···-··"····· · .' .. .. • .. .. • • • • 0.5-+---'----'--.L-..'---;----'-----'----'---'----i---'---'---'---'----i-'--L.--'---'---'---i---'--.,___J........J'---i-:----'----'---'---'---i-~ 3000 2500 1500 2000 1000 500 f [MHz] セ@ _!J TEM R22 Uncertainty of Frequency Response of E-field: ± 6.3% (k=2) Certificate No: EX3-3931_0ct16 Page 7 of 38 October 3, 2016 EX3DV4- SN:3931 Receiving Pattern (), S = 0° f=600 MHz,TEM f= 1800 MHz,R22 90 00 135 45 .. • •, .. .. 18C .. .. . o• oe. • 1'2 .oa 18C .. Tot 0.5 ::!:!. セ@ .. .. -0.5 Tot . i i i) •z • ;=* ~.--+ ;..._ ·*=17·~1.,,.._.~. . ·r~· -~ ·..,=-;", 8-), f = 900 MHz 1.0 0.8 0.6 0.4 0.2 セ@ 0 .0 D -0.2 ·i 270 315 -1 .0 -0.8 -0.6 -0.4 -0.2 0.0 0.2 0.4 0.6 0.8 1.0 Uncertainty of Spherical Isotropy Assessment: ± 2.6% (k=2) Certificate No: EX3-3931_0c t16 Page 10 of 38 . . • • I. ...!..l ...!..l measured anatyocal J • 30 . . 1 I. 1. 35 40 October 3, 2016 EX3DV4- SN:3931 DASY/EASY - Parameters of Probe: EX3DV4 - SN:3931 Other Probe Parameters Triangular Sensor Arrangement 127.3 Connector Angle (0 ) Mechanical Surface Detection Mode enabled Optical Surface Detection Mode disabled Probe Overall Length 337mm Probe Body Diameter 10mm 9mm Tip Length 2.5mm Tip Diameter Probe Tip to Sensor X Calibration Point 1 mm Probe Tip to Sensor Y Calibration Point 1 mm Probe Tip to Sensor Z Calibration Point 1 mm Recommended Measurement Distance from Surface Certificate No: EX3-3931_0ct16 Page 11 of 38 1.4mm October 3, 2016 EX3DV4- SN:3931 Append.1x: M 0 d u Iaf10n C a l"b 1 ration p arameters UID Communication System Name cw 10010CAA SAR Validation (Square, 100ms, 10ms) 10011CAB UMTS-FDD (WCDMA) 10012CAB IEEE 802.11 b WiFi 2.4 GHz (DSSS, 1 Mbos) 10013CAB IEEE 802.11 g WiFi 2.4 GHz (DSSSOFDM, 6 Mbos) 10021DAB GSM-FDD (TDMA, GMSK) 10023DAB GPRS-FDD (TDMA, GMSK, TN 0) 10024DAB GPRS-FDD (TDMA, GMSK, TN 0-1) 10025DAB EDGE-FDD (TOMA, 8PSK, TN 0) 10026DAB EDGE-FDD (TOMA, 8PSK, TN 0-1 ) 10027DAB GPRS-FDD (TOMA, GMSK, TN 0-1-2) 10028DAB GPRS-FDD (TDMA, GMSK, TN 0-1-2-3) 10029- EDGE-FDD (TOMA, 8PSK, TN 0-1-2) DAB 10030- IEEE 802.15.1 Bluetooth (GFSK, DH1) CAA 10031CAA IEEE 802.15.1 Bluetooth (GFSK, DH3) Certificate No: EX3-3931_0ct16 dB dB,/µV 0.00 0.00 0.00 3.48 0.00 0.00 0.00 69.31 1.00 1.00 1.00 12.63 5.87 4.02 1.30 75.87 70.66 72.39 16.27 13.78 18.20 1.19 1.01 1.24 69.63 66.38 65.29 16.77 14.76 16.42 1.26 1.20 4.82 64.91 63.67 66.95 16.05 14.96 17.27 5.04 4.95 100.00 66.77 66.50 114.09 17.23 16.90 27.93 100.00 25.45 83.93 118.26 96.76 11 1.52 30.54 24.27 27.32 99.99 19.40 100.00 118.26 92.86 112.26 30.60 23.18 25.94 100.00 100.00 5.67 115.42 112.41 76.70 28.11 26.50 28.63 15.06 5.92 9.71 105.00 75.84 91.87 40.92 27.63 32.18 18.06 11.21 100.00 104.69 92.21 112.68 36.55 31.55 25.31 100.00 100.00 100.00 114.88 111.26 114.77 27.06 25.19 25.52 100.00 100.00 6 . 19 115.72 111.32 82.03 26.71 24.54 27.36 10.55 7.53 100.00 92.05 83.82 110.56 31.00 27.35 24.66 100.00 100.00 100.00 113.96 110.53 116.75 26.95 25.16 24.95 100.00 100.00 117.62 110.75 26.11 23.01 Page 12 of 38 dB VR mV Max UncE (k=2) +2.2 % 10.00 165.2 169.6 158.4 20.0 0.00 20.0 20.0 150.0 ±9.6 % 0.41 150.0 150.0 150.0 ±9.6% 1.46 150.0 150.0 150.0 ±9.6 % 9.39 150.0 150.0 50.0 ±9.6 % 9.57 50.0 50.0 50.0 ±9.6% 6.56 50.0 50.0 60.0 ±9.6 % 12.57 60.0 60.0 50.0 ±9.6 % 9.56 50.0 50.0 60.0 ±9.6 % 4.80 60.0 60.0 80.0 ±9.6 % 3.55 80.0 80.0 100.0 ±9.6 % 7.80 100.0 100.0 80.0 ±9.6% 5.30 80.0 80.0 70.0 ±9.6 % 1.88 70.0 70.0 100.0 ±9.6 % 0.00 100.0 100.0 ±9.6 % October 3, 2016 EX3DV4- SN:3931 10032CAA IEEE 802.15.1 Bluetooth (GFSK, OHS) 100.00 131.18 29.75 100.00 100.00 10.93 125.29 114.95 90.53 28.26 23.87 23.32 20.55 7.67 5.70 101.44 84.45 84.58 27.99 21.88 20.06 5.85 2.95 3.92 85.75 74.86 81.20 22.03 17.34 18.80 3.48 2.10 15.13 79.72 71 .76 95.54 19.80 15.97 24.90 28.86 9.07 4.82 107.18 87.21 82.50 29.66 22.88 19.36 5.58 2.82 4.08 85.1 3 74.36 82.09 21 .78 17.11 19.24 3.57 2.12 5.80 80.38 72.10 88.31 20.14 16.20 21.06 2.44 1.80 100.00 75.65 71.10 110.27 18.16 15.73 25.32 100.00 32.06 0.00 114.03 97.64 105.67 27.70 22.93 0.52 0.00 0.00 11.94 101.10 94.56 82.95 0.34 3.16 20.71 15.06 9.78 15.54 89.64 81.31 88.48 24.59 21.11 21.39 23.79 11.46 13.32 97.14 84.91 89.14 25.51 21.03 23.36 16.34 10.18 4.78 93.59 84.57 77.20 26.16 22.45 24.69 7.46 5.76 1.30 84.92 78.94 66.67 27.60 24.73 17.10 1.37 1.27 100.00 66.65 64.87 139.37 16.91 15.53 36.42 100.00 5.80 134.75 90.90 34.85 23.07 10033CAA IEEE 802.15.1 Bluetooth (Pl/4-DQPSK, DH1) 10034CAA IEEE 802.15.1 Bluetooth (Pl/4-DQPSK. DH3) 10035CAA IEEE 802.15.1 Bluetooth (Pl/4-DQPSK, OHS) 10036CAA IEEE 802.15.1 Bluetooth (8-DPSK, DH1) 10037CAA IEEE 802.15.1 Bluetooth (8-DPSK, DH3) 10038CAA IEEE 802.15.1 Bluetooth (8-DPSK, OHS) 10039CAB CDMA2000 (1xRTI. RC1) 10042CAB IS-54 / IS-136 FOO (TDMA/FDM. Pl/4DQPSK. Halfrate) 10044CAA IS-91 /EIA/TIA-553 FOO (FDMA, FM) 10048CAA DECT (TDD, TDMA/FDM, GFSK, Full Slot, 24) 10049- CAA DECT (TDD, TDMA/FDM, GFSK, Double Slot, 12) 10056CAA UMTS-TDD (TD-SCOMA, 1.28 Mcps) 10058DAB EDGE-FOO (TOMA. 8PSK, TN 0-1 -2-3) 10059CAB IEEE 802.11 b WiFi 2.4 GHz (DSSS, 2 Mbps) 10060CAB IEEE 802.11 b WiFi 2.4 GHz (DSSS, 5.5 Mbosl Certificate No: EX3-3931_0c t16 Page 13 of 38 1.17 100.0 ±9.6% 5.30 100.0 100.0 70.0 ±9.6% 1.88 70.0 70.0 100.0 ±9.6 % 1.17 100.0 100.0 100.0 ±9.6% 5.30 100.0 100.0 70.0 ±9.6 % 1.88 70.0 70.0 100.0 ±9.6 % 1.17 100.0 100.0 100.0 ±9.6 % 0.00 100.0 100.0 150.0 ±9.6 % 7.78 150.0 150.0 50.0 ±9.6 % 0.00 50.0 50.0 150.0 ±9.6 % 13.80 150.0 150.0 25.0 ±9.6 % 10.79 25.0 25.0 40.0 ±9.6% 9.03 40.0 40.0 50.0 ±9.6 % 6.55 50.0 50.0 100.0 ±9.6 % 0.61 100.0 100.0 110.0 ±9.6% 1.30 110.0 110.0 110.0 ±9.6 % 110.0 110.0 EX3DV4- SN:3931 10061CAB IEEE 802.11 b WiFi 2.4 GHz (DSSS, 11 Mbps) October 3, 2016 4.16 86.26 24.31 6.78 3.18 4.62 92.08 78.55 66.99 26.03 20.67 16.77 4.83 4.75 4.64 66.75 66.51 67.08 16.66 16.38 16.86 4.86 4.77 4.89 66.87 66.60 67.27 16.78 16.47 17.04 5.19 5.08 4.77 67.18 66.89 67.14 17.02 16.71 17.11 5.06 4.94 4.78 67.12 66.80 67.15 17.13 16.79 17.25 5.09 4.97 5.07 67.18 66.83 67.35 17.31 16.94 17.68 5.38 5.26 5.11 67.26 66.92 67.30 17.72 17.34 17.84 5.48 5.34 5.18 67.51 67.10 67.33 18.02 17.60 18.03 5.55 5.42 4.92 67.43 67.05 67.02 18.19 17.77 17.54 5.15 5.05 4.89 66.91 66.61 67.32 17.55 17.20 17.73 5.18 5.06 4.97 67.36 66.97 67.51 17.81 17.41 18.05 5.26 5.13 4.97 67.57 67.15 67.45 18.16 17.71 18.19 5.25 5.12 5.01 67.52 67.08 67.53 18.35 17.88 18.46 5.35 5.20 5.05 67.85 67.32 67.39 18.77 18.23 18.61 5.33 5.20 5.08 67.57 67.09 67.49 18.84 18.32 18.72 5.35 5.23 67.63 67.15 10062CAB IEEE 802.11 a/h WiFi 5 GHz (OFDM, 6 Mbos) 10063CAB IEEE 802.11a/h WiFi 5 GHz (OFDM, 9 Mbps) 10064CAB IEEE 802.11a/h WiFi 5 GHz (OFDM, 12 Mbos\ 10065CAB IEEE 802.11a/h WiFi 5 GHz (OFDM, 18 Mbps) 10066CAB IEEE 802.11a/h WiFi 5 GHz (OFDM, 24 Mbos\ 10067CAB IEEE 802.11 a/h WiFi 5 GHz (OFDM, 36 Mbps) 10068CAB IEEE 802.11 a/h WiFi 5 GHz (OFDM, 48 Mbps) 10069CAB IEEE 802.11a/h WiFi 5 GHz (OFDM, 54 Mbos) 10071CAB IEEE 802.11 g WiFi 2.4 GHz (DSSS/OFDM, 9 Mbps) 10072CAB IEEE 802.11 g WiFi 2.4 GHz

Download: UINS U-Installer RF Exposure Info Test Report_SAR revised Ubiquiti Networks, Inc.
Mirror Download [FCC.gov]UINS U-Installer RF Exposure Info Test Report_SAR revised Ubiquiti Networks, Inc.
Document ID3365711
Application IDjSmyJP8/fWYRBXwIVjv2VQ==
Document DescriptionTest Report_SAR revised
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeRF Exposure Info
Display FormatAdobe Acrobat PDF - pdf
Filesize321.6kB (4020052 bits)
Date Submitted2017-04-21 00:00:00
Date Available2017-04-21 00:00:00
Creation Date2017-10-26 12:07:19
Producing SoftwareGPL Ghostscript 9.18
Document Lastmod2017-10-26 12:07:19
Document TitleTest Report_SAR revised
Document CreatorMicrosoft® Word 2010

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 1
XMP Toolkit                     : XMP toolkit 2.9.1-13, framework 1.6
About                           : uuid:40d54ce3-9c6d-11f2-0000-02c7314339d4
Producer                        : GPL Ghostscript 9.18
Modify Date                     : 2017:07:09 02:45:44Z
Create Date                     : 2017:07:09 02:45:44Z
Creator Tool                    : UnknownApplication
Document ID                     : uuid:40d54ce3-9c6d-11f2-0000-02c7314339d4
Format                          : application/pdf
Title                           : Untitled
EXIF Metadata provided by EXIF.tools

Facebook Twitter Google+ RSS © FCCID.io 2017