FCC ID SWX-XR2
2.4GHz Mini PCI module
by Ubiquiti Inc.
Grantee Code: SWX Product Code: XR2
Latest application date: 2015-04-17
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2015-04-17 |
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2012-02-13 |
| 2412-2462 MHz | Original Equipment | 2007-02-16 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| User Manual | Users Manual | 2015-04-17 | PDF 5 MB |
| User Manual | Users Manual | 2012-02-13 | PDF 443.5 KB |
| User Manual | Users Manual | 2007-02-16 | PDF 120.3 KB |
| Internal Photos | Internal Photos | 2012-02-13 | PDF 80.8 KB |
| External photos | External Photos | 2012-02-13 | PDF 80.8 KB |
| External Photos | External Photos | 2007-02-16 | PDF 80.8 KB |
| Label and Label Location | ID Label/Location Info | 2012-02-13 | PDF 511.3 KB |
| Label | ID Label/Location Info | 2007-02-16 | PDF 209 KB |
| Antenna Data Sheet | Operational Description | 2007-02-16 | PDF 49.6 KB |
| Antenna Info | Operational Description | 2007-02-16 | PDF 49.6 KB |
| Setup photos | Test Setup Photos | 2012-02-13 | PDF 562.4 KB |
| Test Setup Photo | Test Setup Photos | 2007-02-16 | PDF 135.3 KB |
| Test Report | Test Report | 2015-04-17 | PDF 940.6 KB |
| Test report | Test Report | 2012-02-13 | PDF 147 KB |
| Test Report | Test Report | 2007-02-16 | PDF 3 MB |
| Cover Letter | Cover Letter(s) | 2015-04-17 | PDF 112.1 KB |
| Grantee Contact Change | Cover Letter(s) | 2015-04-17 | PDF 121.3 KB |
| Letter of Agency | Cover Letter(s) | 2015-04-17 | PDF 153.9 KB |
| Cover Letters | Cover Letter(s) | 2012-02-13 | PDF 68.6 KB |
| Cpver letters | Cover Letter(s) | 2012-02-13 | PDF 75.1 KB |
| Authorization | Cover Letter(s) | 2007-02-16 | PDF 117.6 KB |
| Confidentiality Agreement | Cover Letter(s) | 2007-02-16 | PDF 129.7 KB |
| Cover Letter | Cover Letter(s) | 2007-02-16 | PDF 32.4 KB |
| Modular Approval Letter | Cover Letter(s) | 2007-02-16 | PDF 135.9 KB |
| RF Exposure info | RF Exposure Info | 2012-02-13 | PDF 109.6 KB |
| MPE Calculations | RF Exposure Info | 2007-02-16 | PDF 37.5 KB |
Application Information
| Application ID | cFHnXZKNI/cjzZM8juecnQ== |
|---|---|
| Final Action Date | 2015-04-17 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0012268215 |
| Model | XR2 |
| Frequency Range | 2412-2462 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | 2.4GHz Mini PCI module |
| Responsible Party | Mark Feil, Compliance Director, compliance@ui.com  , 385-293-3532 |
| Test Firm | David Schramm, SGS North America, Inc., david.schramm@sgs.com  , 973-461-7914 |
| TCB Email | tei@timcoengr.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | No |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Modular approval. Power output listed is conducted. This module may only be installed by the OEM or an OEM integrator. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. (Date of Grant: 02/16/2007) Class II Permissive Change: This Class II Permissive Change is to add a 7.4dBi antenna. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| cFHnXZKNI/cjzZM8juecnQ== | 2015-04-17 | Class II permissive change or modification of presently authorized equipment |
| veSvzK8FpM7cLZZMTNl+JA== | 2012-02-13 | Class II permissive change or modification of presently authorized equipment |
| 0RT1C+CwkLClrE7Q5xYQCQ== | 2007-02-16 | Original Equipment |
Equipment Authorization
| Frequency | Output | Rules |
|---|---|---|
| 2412-2462 MHz | 0.9770000 | 15C |
Grants
TCB Grant - Application veSvzK8FpM7cLZZMTNl+JA==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Nemko Canada Inc. 303 River Road Ottawa, Ontario, K1V 1H2 Canada |
Date of Grant: 02/13/2012 Application Dated: 02/10/2012 |
| Ubiquiti Networks, Inc. |
| 2580 Orchard Parkway |
| San Jose, CA 95131 |
| Attention: Michael Taylor , Compliance Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | SWX-XR2 |
| Name of Grantee: | Ubiquiti Networks, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | 2.4 GHz mini-PCI 802.11b/g |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.977 |
| Modular approval. Power output listed is conducted. This module may only be installed by the OEM or an OEM integrator. The antenna(s) used for this transmitter is 5dBi gain and must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Reduced power level shall be set in order to comply with emission requirement and the narrower operational frequency band be applied for the module with this antenna. |
EAS Grant - Application veSvzK8FpM7cLZZMTNl+JA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Ubiquiti Networks, Inc. 2580 Orchard Parkway San Jose, CA 95131 United States |
Date of Grant: 02/13/2012 Application Dated: 02/10/2012 |
| Attention: Michael Taylor , Compliance Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | SWX-XR2 |
| Name of Grantee: | Ubiquiti Networks, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | 2.4 GHz mini-PCI 802.11b/g |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.977 |
| Modular approval. Power output listed is conducted. This module may only be installed by the OEM or an OEM integrator. The antenna(s) used for this transmitter is 5dBi gain and must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Reduced power level shall be set in order to comply with emission requirement and the narrower operational frequency band be applied for the module with this antenna. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 04/17/2015 Application Dated: 04/17/2015 |
| Ubiquiti Inc. |
| 685 Third Avenue |
| New York, NY 10017 |
| Attention: Mark Feil , Compliance Director |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | SWX-XR2 |
| Name of Grantee: | Ubiquiti Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | 2.4GHz Mini PCI module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.977 |
| Modular approval. Power output listed is conducted. This module may only be installed by the OEM or an OEM integrator. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. (Date of Grant: 02/16/2007) Class II Permissive Change: This Class II Permissive Change is to add a 7.4dBi antenna. |
EAS Grant - Application cFHnXZKNI/cjzZM8juecnQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Ubiquiti Inc. 685 Third Avenue New York, NY 10017 United States |
Date of Grant: 04/17/2015 Application Dated: 04/17/2015 |
| Attention: Mark Feil , Compliance Director |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | SWX-XR2 |
| Name of Grantee: | Ubiquiti Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | 2.4GHz Mini PCI module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.977 |
| Modular approval. Power output listed is conducted. This module may only be installed by the OEM or an OEM integrator. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. (Date of Grant: 02/16/2007) Class II Permissive Change: This Class II Permissive Change is to add a 7.4dBi antenna. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION | TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
| MET Laboratories, Inc. 914 W. Patapsco Avenue Baltimore, MD 21230-3432 | Date of Grant: 02/16/2007 Application Dated: 02/16/2007 |
| Ubiquiti Networks, Inc. |
| 2580 Orchard Parkway |
| San Jose, CA 95131 |
| Attention: Michael Taylor , Compliance Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | SWX-XR2 |
| Name of Grantee: | Ubiquiti Networks, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | 2.4GHz mini-PCI 802.11b/g |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.977 |
| Modular approval. Power output listed is conducted. This module may only be installed by the OEM or an OEM integrator. The antenna(s) used for this transmitter is 3dBi gain and must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
EAS Grant - Application 0RT1C+CwkLClrE7Q5xYQCQ==
| COPY | FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION | COPY |
| Certification |
| Ubiquiti Networks, Inc. 2580 Orchard Parkway San Jose, CA 95131 United States | Date of Grant: 02/16/2007 Application Dated: 02/16/2007 |
| Attention: Michael Taylor , Compliance Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | SWX-XR2 |
| Name of Grantee: | Ubiquiti Networks, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | 2.4GHz mini-PCI 802.11b/g |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.977 |
| Modular approval. Power output listed is conducted. This module may only be installed by the OEM or an OEM integrator. The antenna(s) used for this transmitter is 3dBi gain and must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.
|
| Mail To: |
| EA368416 |