FCC ID SXNLSNM-0001-A
Light Sensory Network Module
by Sensity Systems
Grantee Code: SXN Product Code: LSNM0001A
Latest application date: 2013-12-22
FCC ID Device Details
| FCC ID | SXNLSNM-0001-A |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | SXN |
| Product Code | LSNM0001A |
| Applicant Business | Sensity Systems 🇺🇸 |
| Related Domains |  sensity.com |
| Equipment Class | Light Sensory Network Module |
| Test Firm | Bay Area Compliance Laboratories Corporation |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2412-2462 MHz | Original Equipment | 2013-12-22 |
| 5180-5240 MHz | Original Equipment | 2013-12-22 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Manual | Users Manual | 2013-12-22 | PDF 639.6 KB |
| Int Photos | Internal Photos | 2013-12-22 | PDF 748.8 KB |
| Int Photos | Internal Photos | 2013-12-22 | PDF 750.2 KB |
| Ext Photos | External Photos | 2013-12-22 | PDF 748.8 KB |
| Ext Photos | External Photos | 2013-12-22 | PDF 750.2 KB |
| FCC ID Label | ID Label/Location Info | 2013-12-22 | PDF 418.7 KB |
| Setup Photos | Test Setup Photos | 2013-12-22 | PDF 249.8 KB |
| Setup Photos | Test Setup Photos | 2013-12-22 | PDF 249.8 KB |
| DFS Report | Test Report | 2013-12-22 | PDF 1.2 MB |
| Test Report | Test Report | 2013-12-22 | PDF 1 MB |
| Test Report | Test Report | 2013-12-22 | PDF 2.4 MB |
| Confidentiality Letter | Cover Letter(s) | 2013-12-22 | PDF 906.3 KB |
| Confidentiality Letter | Cover Letter(s) | 2013-12-22 | PDF 901.8 KB |
| Module Approval Letter | Cover Letter(s) | 2013-12-22 | PDF 2.2 MB |
| POA | Cover Letter(s) | 2013-12-22 | PDF 930.5 KB |
| POA | Cover Letter(s) | 2013-12-22 | PDF 934.9 KB |
| RF Exposure | RF Exposure Info | 2013-12-22 | PDF 20.5 KB |
| RF Exposure | RF Exposure Info | 2013-12-22 | PDF 22.6 KB |
Application Information
| Application ID | pHBliDEGeUZHDmx02eWHZw== |
|---|---|
| Final Action Date | 2013-12-22 |
| Application Purpose | Original Equipment |
| Applicant FRN | 0022491799 |
| Model | LSNM-0001-A |
| Frequency Range | 2412-2462 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | Light Sensory Network Module |
| Responsible Party | Christoher Hizer Hizer, HW Engineer, chizer@sensity.com , 408-841-4200 |
| Test Firm | Kaveh Moraghebi, Bay Area Compliance Laboratories Corporation, kaveh@baclcorp.com  , 408-732-9162 |
| TCB Email | bacl.regulatory@baclcorp.com |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Limited Single Modular Approval |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Output power listed is conducted. Limited Modular approval. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain maybe used with this transmitter. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| pHBliDEGeUZHDmx02eWHZw== | 2013-12-22 | Original Equipment |
| cabbDLoCvb7q/q7pz+6F8g== | 2013-12-22 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application pHBliDEGeUZHDmx02eWHZw==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Bay Area Compliance Laboratory Corp. 1274 Anvilwood Avenue Sunnyvale, CA 94089 |
Date of Grant: 12/22/2013 Application Dated: 12/22/2013 |
| Sensity Systems |
| 1237 Arques Avenue |
| Sunnyvale, CA 94085 |
| Attention: Christoher Hizer Hizer , HW Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | SXNLSNM-0001-A |
| Name of Grantee: | Sensity Systems |
| Equipment Class: | Digital Transmission System |
| Notes: | Light Sensory Network Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.056 | ||
| CC | 15C | 2422.0 - 2452.0 | 0.046 |
| Output power listed is conducted. Limited Modular approval. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain maybe used with this transmitter. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application pHBliDEGeUZHDmx02eWHZw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Sensity Systems 1237 Arques Avenue Sunnyvale, CA 94085 United States |
Date of Grant: 12/22/2013 Application Dated: 12/22/2013 |
| Attention: Christoher Hizer Hizer , HW Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | SXNLSNM-0001-A |
| Name of Grantee: | Sensity Systems |
| Equipment Class: | Digital Transmission System |
| Notes: | Light Sensory Network Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.056 | ||
| CC | 15C | 2422.0 - 2452.0 | 0.046 |
| Output power listed is conducted. Limited Modular approval. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain maybe used with this transmitter. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Bay Area Compliance Laboratory Corp. 1274 Anvilwood Avenue Sunnyvale, CA 94089 |
Date of Grant: 12/22/2013 Application Dated: 12/22/2013 |
| Sensity Systems |
| 1237 Arques Avenue |
| Sunnyvale, CA 94085 |
| Attention: Christoher Hizer Hizer , HW Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | SXNLSNM-0001-A |
| Name of Grantee: | Sensity Systems |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Light Sensory Network Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5240.0 | 0.0294 | ||
| CC | 15E | 5190.0 - 5230.0 | 0.0272 | ||
| CC ND | 15E | 5260.0 - 5320.0 | 0.0481 | ||
| CC ND | 15E | 5270.0 - 5310.0 | 0.0325 | ||
| CC ND | 15E | 5500.0 - 5700.0 | 0.0351 | ||
| CC ND | 15E | 5510.0 - 5670.0 | 0.0313 |
| Output power listed is conducted. Limited Modular approval. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain maybe used with this transmitter. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application cabbDLoCvb7q/q7pz+6F8g==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Sensity Systems 1237 Arques Avenue Sunnyvale, CA 94085 United States |
Date of Grant: 12/22/2013 Application Dated: 12/22/2013 |
| Attention: Christoher Hizer Hizer , HW Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | SXNLSNM-0001-A |
| Name of Grantee: | Sensity Systems |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Light Sensory Network Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5240.0 | 0.0294 | ||
| CC | 15E | 5190.0 - 5230.0 | 0.0272 | ||
| CC ND | 15E | 5260.0 - 5320.0 | 0.0481 | ||
| CC ND | 15E | 5270.0 - 5310.0 | 0.0325 | ||
| CC ND | 15E | 5500.0 - 5700.0 | 0.0351 | ||
| CC ND | 15E | 5510.0 - 5670.0 | 0.0313 |
| Output power listed is conducted. Limited Modular approval. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain maybe used with this transmitter. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: |