FCC ID SXNWYSBMVGX41

CORE NODE EXTERNAL, WIFI

by Sensity Systems

Grantee Code: SXN   Product Code: WYSBMVGX41
Latest application date: 2015-11-10

Device Images

FCC ID Device Details

FCC IDSXNWYSBMVGX41
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeSXN
Product CodeWYSBMVGX41
Applicant BusinessSensity Systems 🇺🇸
Related Domains sensity.com
Equipment ClassCORE NODE EXTERNAL, WIFI
Test FirmUL Verification Services Inc. (formerly UL CCS)

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2412-2462 MHzOriginal Equipment2015-11-10
5180-5240 MHzOriginal Equipment2015-11-10

Exhibits

DocumentTypeAvailableFile
Core_Node_Installation_Guide_UL_submissionUsers Manual2015-11-10PDF 396.4 KB
CNEX-277W2N INTERNALInternal Photos2016-03-10PDF 2 MB
CNEX-480W2N INTERNALInternal Photos2016-03-10PDF 3.7 MB
CNEX-277W2N ETERNALExternal Photos2015-11-10PDF 466.6 KB
CNEX-480W2N EXTERNALExternal Photos2015-11-10PDF 542 KB
Label_CNEX-277W2NID Label/Location Info2015-11-10PDF 246.2 KB
Label_CNEX-480W2NID Label/Location Info2015-11-10PDF 286.3 KB
Label_location_CNEX-277W2NID Label/Location Info2015-11-10PDF 2 MB
Label_location_CNEX-480W2NID Label/Location Info2015-11-10PDF 2.9 MB
15U21052-E1V2 FCC IC Setup Photos DTS WLANTest Setup Photos2015-11-10PDF 573.9 KB
15U21052-E2V2 FCC IC Setup Photos UNII WLANTest Setup Photos2015-11-10PDF 575.5 KB
15U21052-E5V2 FCC IC Setup Photos DFSTest Setup Photos2015-11-10PDF 148.1 KB
15U21052-E1V2 FCC IC Report DTS WLANTest Report2015-11-10PDF 2.8 MB
15U21052-E2V2 FCC IC Report UNII WLAN_Part1Test Report2015-11-10PDF 3.5 MB
15U21052-E2V2 FCC IC Report UNII WLAN_Part2Test Report2015-11-10PDF 2.8 MB
15U21052-E5V2 FCC IC REPORT DFSTest Report2015-11-10PDF 1,018.2 KB
FCC Agent Authorization-Letter-to-ULCover Letter(s)2015-11-10PDF 102.7 KB
FCC Request for Confidentiality Letter (Long and Short Term) signedCover Letter(s)2015-11-10PDF 61.7 KB
Sensity_Authorization_FCC_MattersCover Letter(s)2015-11-10PDF 23.5 KB
15U21052-E10V1 FCC IC MPE ReportRF Exposure Info2015-11-10PDF 266.3 KB
Block_Diagram_v2 Metadata onlyBlock DiagramPDF 186.5 KB
Schematic_1_NEMA-Base-Board_277V Metadata onlySchematicsPDF 27 KB
Schematic_1_NEMA-Base-Board_480V Metadata onlySchematicsPDF 26.9 KB
Schematic_2_High-Voltage-Board_277V Metadata onlySchematicsPDF 175.6 KB
Schematic_2_High-Voltage-Board_480V Metadata onlySchematicsPDF 175.6 KB
Schematic_3_Low-Voltage-Board_277V Metadata onlySchematicsPDF 317.2 KB
Schematic_3_Low-Voltage-Board_480V Metadata onlySchematicsPDF 317.2 KB
FXP831 07 0100C_UFL_[Antenna Spec for Light Controller] Metadata onlyOperational DescriptionPDF 738.9 KB
Operational Description v3_103115 Metadata onlyOperational DescriptionPDF 536.6 KB
ExternalCoreNode_U-NII Device SW Security Statement_Hizer_09.15.15 Metadata onlySDR Software/Security InfPDF 187.3 KB

Application Information

Application ID8MWpSVBjkUVqH4w9y7z7+Q==
Final Action Date2015-11-10
Application PurposeOriginal Equipment
Applicant FRN0022491799
ModelWYSBMVGX41
Frequency Range2412-2462 MHz
Equipment ClassDTS - Digital Transmission System
Device DescriptionCORE NODE EXTERNAL, WIFI
Responsible PartyChristoher Hizer Hizer, HW Engineer, chizer@sensity.com , 408-841-4200
Test FirmJay Kogoma, UL Verification Services Inc. (formerly UL CCS), jay.kogoma@ul.com , 510-319-4135
TCB EmailLST.FRE.CertNotice@ul.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityYes
Short-Term Confidentiality Date03/10/2016
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsPower output listed is conducted. The antenna(s) used for this transmitter must be used to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Installation must be performed by professionals.

Applications

Application IDDatePurpose
8MWpSVBjkUVqH4w9y7z7+Q==2015-11-10Original Equipment
70eZePTelH4ZCPX9/ZxKtg==2015-11-10Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2412-2462 MHz0.038900015CCC
5180-5240 MHz0.049615E38, CC
5260-5320 MHz0.113515E38, CC
5500-5580 MHz0.124515E38, CC
5660-5700 MHz0.111115E38, CC

Grants

TCB Grant - Application 8MWpSVBjkUVqH4w9y7z7+Q==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  UL Verification Services Inc. (formerly UL CCS)
47173 Benicia Street
Fremont, CA 94538
Date of Grant: 11/10/2015

Application Dated: 11/02/2015
Sensity Systems
1237 Arques Avenue
Sunnyvale, CA 94085
 
Attention: Christoher Hizer Hizer , HW Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  SXNWYSBMVGX41
Name of Grantee:  Sensity Systems
Equipment Class: Digital Transmission System
Notes: CORE NODE EXTERNAL, WIFI
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.0389  

Power output listed is conducted. The antenna(s) used for this transmitter must be used to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Installation must be performed by professionals.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application 8MWpSVBjkUVqH4w9y7z7+Q==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Sensity Systems
1237 Arques Avenue
Sunnyvale, CA 94085
United States
  Date of Grant: 11/10/2015

Application Dated: 11/02/2015
 
Attention: Christoher Hizer Hizer , HW Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  SXNWYSBMVGX41
Name of Grantee:  Sensity Systems
Equipment Class: Digital Transmission System
Notes: CORE NODE EXTERNAL, WIFI
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.0389  

Power output listed is conducted. The antenna(s) used for this transmitter must be used to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Installation must be performed by professionals.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application 70eZePTelH4ZCPX9/ZxKtg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  UL Verification Services Inc. (formerly UL CCS)
47173 Benicia Street
Fremont, CA 94538
Date of Grant: 11/10/2015

Application Dated: 11/02/2015
Sensity Systems
1237 Arques Avenue
Sunnyvale, CA 94085
 
Attention: Christoher Hizer Hizer , HW Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  SXNWYSBMVGX41
Name of Grantee:  Sensity Systems
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: CORE NODE EXTERNAL, WIFI
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC 15E 5180.0  -  5240.0 0.0496  
38 CC 15E 5260.0  -  5320.0 0.1135  
38 CC 15E 5500.0  -  5580.0 0.1245  
38 CC 15E 5660.0  -  5700.0 0.1111  

Power output listed is conducted. The antenna(s) used for this transmitter must be used to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Installation must be performed by professionals. This device has 20 and 40 MHz bandwidth modes.

38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application 70eZePTelH4ZCPX9/ZxKtg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Sensity Systems
1237 Arques Avenue
Sunnyvale, CA 94085
United States
  Date of Grant: 11/10/2015

Application Dated: 11/02/2015
 
Attention: Christoher Hizer Hizer , HW Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  SXNWYSBMVGX41
Name of Grantee:  Sensity Systems
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: CORE NODE EXTERNAL, WIFI
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC 15E 5180.0  -  5240.0 0.0496  
38 CC 15E 5260.0  -  5320.0 0.1135  
38 CC 15E 5500.0  -  5580.0 0.1245  
38 CC 15E 5660.0  -  5700.0 0.1111  

Power output listed is conducted. The antenna(s) used for this transmitter must be used to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Installation must be performed by professionals. This device has 20 and 40 MHz bandwidth modes.


38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.

Mail To: