FCC ID T2C-YL43455

Wi-Fi+BT Module

by YEALINK (XIAMEN ) NETWORK TECHNOLOGY CO., LTD.

Grantee Code: T2C   Product Code: YL43455
Latest application date: 2022-07-26

FCC ID Device Details

FCC IDT2C-YL43455
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeT2C
Product CodeYL43455
Applicant BusinessYEALINK (XIAMEN ) NETWORK TECHNOLOGY CO., LTD. 🇨🇳
Related Domains yealink.com
Equipment ClassWi-Fi+BT Module
Test FirmShenzhen Accurate Technology Co., Ltd.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2022-07-26
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2022-07-26
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2022-07-26
2402-2480 MHzOriginal Equipment2021-11-05
2402-2480 MHzOriginal Equipment2021-11-05
5180-5240 MHzOriginal Equipment2021-11-05

Exhibits

DocumentTypeAvailableFile
User ManualUsers Manual2022-05-05PDF 447.9 KB
User manualUsers Manual2022-05-05PDF 447.9 KB
Internal PhotosInternal Photos2022-07-26PDF 1.1 MB
Internal PhotosInternal Photos2022-05-05PDF 388.7 KB
External PhotosExternal Photos2022-07-26PDF 1.1 MB
External PhotosExternal Photos2022-05-05PDF 185.7 KB
ID Label and Label LocationID Label/Location Info2022-07-26PDF 259.8 KB
ID Label and Label LocationID Label/Location Info2021-11-05PDF 255 KB
Label & LocationID Label/Location Info2021-11-05PDF 255 KB
Test Setup PhotosTest Setup Photos2022-07-26PDF 1.1 MB
Test Setup PhotosTest Setup Photos2022-07-26PDF 1.1 MB
DFS Test Setup PhotosTest Setup Photos2022-05-05PDF 112.3 KB
Test Setup PhotosTest Setup Photos2022-05-05PDF 326.4 KB
Test Setup photosTest Setup Photos2022-05-05PDF 435.5 KB
Test ReportTest Report2022-07-26PDF 850.6 KB
Test ReportTest Report2022-07-26PDF 884.9 KB
Test ReportTest Report2022-07-26PDF 988.7 KB
DFS ReportTest Report2021-11-05PDF 468.7 KB
Test ReportTest Report2021-11-05PDF 997.7 KB
Test ReportTest Report2021-11-05PDF 1 MB
Test reportTest Report2021-11-05PDF 2 MB
Attestation LetterAttestation Statements2021-11-05PDF 12.3 KB
C2PC Declaration LetterCover Letter(s)2022-07-26PDF 53.2 KB
POACover Letter(s)2022-07-26PDF 10.9 KB
FCC Long and Short term ConfidentialityCover Letter(s)2021-11-05PDF 113.3 KB
FCC Long and Short term confidentialityCover Letter(s)2021-11-05PDF 113.3 KB
Modular Approval LetterCover Letter(s)2021-11-05PDF 129.5 KB
RF ExposureRF Exposure Info2022-07-26PDF 197.2 KB
RF ExposureRF Exposure Info2022-07-26PDF 195.1 KB
RF ExposureRF Exposure Info2022-07-26PDF 196.9 KB
RF ExposureRF Exposure Info2021-11-05PDF 128.8 KB
RF ExposureRF Exposure Info2021-11-05PDF 124.3 KB
RF ExposureRF Exposure Info2021-11-05PDF 129.3 KB
Blcok Diagram Metadata onlyBlock DiagramPDF 209 KB
Block Diagram Metadata onlyBlock DiagramPDF 209 KB
Schematics Metadata onlySchematicsPDF 550 KB
Circuit Description Metadata onlyOperational DescriptionPDF 191.8 KB
Opreation description Metadata onlyOperational DescriptionPDF 191.8 KB
U-NII Software Security Description Metadata onlyOperational DescriptionPDF 317 KB

Application Information

Application IDl6mlnZU/qVIMhdKPtsq5Rg==
Final Action Date2022-07-26
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0014702682
ModelYL43455
Frequency Range5180-5240 MHz
Equipment ClassNII - Unlicensed National Information Infrastructure TX
Device DescriptionWi-Fi+BT Module
Responsible PartyStone Lu, Vice General Manager, chenjl@yealink.com , 86-592-5702000
Test FirmLisa Zhang, Shenzhen Accurate Technology Co., Ltd., qa@atc-lab.com , +86-755-26503290
TCB Emailbacl.regulatory@baclcorp.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityNo
Grant DeferralNo
Modular EquipmentSingle Modular Approval
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsClass II Permissive Change of adding a new antenna described in this filing. Modular. Modular Approval. Power output listed is conducted. This module is approved for use only in the mobile configurations associated with this filing. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. End-users may not be provided with the module installation instructions. Installation of this device into portable RF Exposure category host devices requires the submission of a Class II permissive change or new application. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device supports 20 MHz, 40 MHz and 80 MHz bandwidth modes.

Applications

Application IDDatePurpose
l6mlnZU/qVIMhdKPtsq5Rg==2022-07-26Class II permissive change or modification of presently authorized equipment
ZnEjsOzghNMVuwIECrb7sA==2022-07-26Class II permissive change or modification of presently authorized equipment
19xjHyJhz+prhm1fPadYhg==2022-07-26Class II permissive change or modification of presently authorized equipment
b+NsM7g2C2pJ08tV3N+wWg==2021-11-05Original Equipment
VPrIGHYR9UAdL42XBVNF7Q==2021-11-05Original Equipment
UmwGdgOekpHTy+YfPzsqEg==2021-11-05Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2402-2480 MHz0.005900015CCC
2402-2480 MHz0.002815CCC
2412-2462 MHz0.035915CCC
5180-5240 MHz0.025815ECC
5260-5320 MHz0.025615ECC, ND
5270-5310 MHz0.027415ECC, ND
5500-5700 MHz0.015215ECC, ND
5500-5710 MHz0.01615ECC, ND
5510-5710 MHz0.01615ECC, ND
5745-5825 MHz0.021715ECC

Grants

TCB Grant - Application ZnEjsOzghNMVuwIECrb7sA==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Bay Area Compliance Laboratory Corp.
1274 Anvilwood Avenue
Sunnyvale, CA 94089
Date of Grant: 07/26/2022

Application Dated: 07/26/2022
YEALINK (XIAMEN ) NETWORK TECHNOLOGY CO., LTD.
309, 3rd Floor, No.16, Yun Ding North Road,
Huli District,
Xiamen City, Fujian,
China
 
Attention: Stone Lu , Vice General Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  T2C-YL43455
Name of Grantee:  YEALINK (XIAMEN ) NETWORK TECHNOLOGY CO., LTD.
Equipment Class: Digital Transmission System
Notes: Wi-Fi+BT Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.0028  
CC 15C 2412.0  -  2462.0 0.0359  

Class II Permissive Change of adding a new antenna described in this filing. Modular Approval. Power output listed is peak conducted. This module is approved for use only in the mobile configurations associated with this filing. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. End-users may not be provided with the module installation instructions. Installation of this device into portable RF Exposure category host devices requires the submission of a Class II permissive change or new application. Compliance of this device in all final host configurations is the responsibility of the Grantee.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application ZnEjsOzghNMVuwIECrb7sA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

YEALINK (XIAMEN ) NETWORK TECHNOLOGY CO., LTD.
309, 3rd Floor, No.16, Yun Ding North Road, Huli District,
Xiamen City, Fujian,
China
  Date of Grant: 07/26/2022

Application Dated: 07/26/2022
 
Attention: Stone Lu , Vice General Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  T2C-YL43455
Name of Grantee:  YEALINK (XIAMEN ) NETWORK TECHNOLOGY CO., LTD.
Equipment Class: Digital Transmission System
Notes: Wi-Fi+BT Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.0028  
CC 15C 2412.0  -  2462.0 0.0359  

Class II Permissive Change of adding a new antenna described in this filing. Modular Approval. Power output listed is peak conducted. This module is approved for use only in the mobile configurations associated with this filing. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. End-users may not be provided with the module installation instructions. Installation of this device into portable RF Exposure category host devices requires the submission of a Class II permissive change or new application. Compliance of this device in all final host configurations is the responsibility of the Grantee.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application VPrIGHYR9UAdL42XBVNF7Q==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Bay Area Compliance Laboratory Corp.
1274 Anvilwood Avenue
Sunnyvale, CA 94089
Date of Grant: 11/05/2021

Application Dated: 11/05/2021
YEALINK (XIAMEN ) NETWORK TECHNOLOGY CO., LTD.
309, 3rd Floor, No.16, Yun Ding North Road,
Huli District,
Xiamen City, Fujian,
China
 
Attention: Stone Lu , Vice General Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  T2C-YL43455
Name of Grantee:  YEALINK (XIAMEN ) NETWORK TECHNOLOGY CO., LTD.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Wi-Fi+BT Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.0059  

Modular Approval. Power output listed is conducted. This module is approved for use only in the mobile configurations associated with this filing. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. End-users may not be provided with the module installation instructions. Installation of this device into portable RF Exposure category host devices requires the submission of a Class II permissive change or new application. Compliance of this device in all final host configurations is the responsibility of the Grantee.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application VPrIGHYR9UAdL42XBVNF7Q==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

YEALINK (XIAMEN ) NETWORK TECHNOLOGY CO., LTD.
309, 3rd Floor, No.16, Yun Ding North Road, Huli District,
Xiamen City, Fujian,
China
  Date of Grant: 11/05/2021

Application Dated: 11/05/2021
 
Attention: Stone Lu , Vice General Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  T2C-YL43455
Name of Grantee:  YEALINK (XIAMEN ) NETWORK TECHNOLOGY CO., LTD.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Wi-Fi+BT Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.0059  

Modular Approval. Power output listed is conducted. This module is approved for use only in the mobile configurations associated with this filing. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. End-users may not be provided with the module installation instructions. Installation of this device into portable RF Exposure category host devices requires the submission of a Class II permissive change or new application. Compliance of this device in all final host configurations is the responsibility of the Grantee.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application UmwGdgOekpHTy+YfPzsqEg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Bay Area Compliance Laboratory Corp.
1274 Anvilwood Avenue
Sunnyvale, CA 94089
Date of Grant: 11/05/2021

Application Dated: 11/05/2021
YEALINK (XIAMEN ) NETWORK TECHNOLOGY CO., LTD.
309, 3rd Floor, No.16, Yun Ding North Road,
Huli District,
Xiamen City, Fujian,
China
 
Attention: Stone Lu , Vice General Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  T2C-YL43455
Name of Grantee:  YEALINK (XIAMEN ) NETWORK TECHNOLOGY CO., LTD.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Wi-Fi+BT Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5240.0 0.0258  
CC ND 15E 5260.0  -  5320.0 0.0256  
CC ND 15E 5270.0  -  5310.0 0.0274  
CC ND 15E 5500.0  -  5700.0 0.0152  
CC ND 15E 5510.0  -  5710.0 0.016  
CC 15E 5745.0  -  5825.0 0.0217  

Modular Approval. Power output listed is conducted. This module is approved for use only in the mobile configurations associated with this filing. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. End-users may not be provided with the module installation instructions. Installation of this device into portable RF Exposure category host devices requires the submission of a Class II permissive change or new application. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device supports 20 MHz, 40 MHz and 80 MHz bandwidth modes.

CC: This device is certified pursuant to two different Part 15 rules sections.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

EAS Grant - Application UmwGdgOekpHTy+YfPzsqEg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

YEALINK (XIAMEN ) NETWORK TECHNOLOGY CO., LTD.
309, 3rd Floor, No.16, Yun Ding North Road, Huli District,
Xiamen City, Fujian,
China
  Date of Grant: 11/05/2021

Application Dated: 11/05/2021
 
Attention: Stone Lu , Vice General Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  T2C-YL43455
Name of Grantee:  YEALINK (XIAMEN ) NETWORK TECHNOLOGY CO., LTD.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Wi-Fi+BT Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5240.0 0.0258  
CC ND 15E 5260.0  -  5320.0 0.0256  
CC ND 15E 5270.0  -  5310.0 0.0274  
CC ND 15E 5500.0  -  5700.0 0.0152  
CC ND 15E 5510.0  -  5710.0 0.016  
CC 15E 5745.0  -  5825.0 0.0217  

Modular Approval. Power output listed is conducted. This module is approved for use only in the mobile configurations associated with this filing. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. End-users may not be provided with the module installation instructions. Installation of this device into portable RF Exposure category host devices requires the submission of a Class II permissive change or new application. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device supports 20 MHz, 40 MHz and 80 MHz bandwidth modes.


CC: This device is certified pursuant to two different Part 15 rules sections.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

TCB Grant - Application l6mlnZU/qVIMhdKPtsq5Rg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Bay Area Compliance Laboratory Corp.
1274 Anvilwood Avenue
Sunnyvale, CA 94089
Date of Grant: 07/26/2022

Application Dated: 07/26/2022
YEALINK (XIAMEN ) NETWORK TECHNOLOGY CO., LTD.
309, 3rd Floor, No.16, Yun Ding North Road,
Huli District,
Xiamen City, Fujian,
China
 
Attention: Stone Lu , Vice General Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  T2C-YL43455
Name of Grantee:  YEALINK (XIAMEN ) NETWORK TECHNOLOGY CO., LTD.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Wi-Fi+BT Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5240.0 0.0258  
CC ND 15E 5260.0  -  5320.0 0.0256  
CC ND 15E 5270.0  -  5310.0 0.0274  
CC ND 15E 5500.0  -  5700.0 0.0152  
CC ND 15E 5500.0  -  5710.0 0.016  
CC 15E 5745.0  -  5825.0 0.0217  

Class II Permissive Change of adding a new antenna described in this filing. Modular. Modular Approval. Power output listed is conducted. This module is approved for use only in the mobile configurations associated with this filing. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. End-users may not be provided with the module installation instructions. Installation of this device into portable RF Exposure category host devices requires the submission of a Class II permissive change or new application. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device supports 20 MHz, 40 MHz and 80 MHz bandwidth modes.

CC: This device is certified pursuant to two different Part 15 rules sections.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

EAS Grant - Application l6mlnZU/qVIMhdKPtsq5Rg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

YEALINK (XIAMEN ) NETWORK TECHNOLOGY CO., LTD.
309, 3rd Floor, No.16, Yun Ding North Road, Huli District,
Xiamen City, Fujian,
China
  Date of Grant: 07/26/2022

Application Dated: 07/26/2022
 
Attention: Stone Lu , Vice General Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  T2C-YL43455
Name of Grantee:  YEALINK (XIAMEN ) NETWORK TECHNOLOGY CO., LTD.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Wi-Fi+BT Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5240.0 0.0258  
CC ND 15E 5260.0  -  5320.0 0.0256  
CC ND 15E 5270.0  -  5310.0 0.0274  
CC ND 15E 5500.0  -  5700.0 0.0152  
CC ND 15E 5500.0  -  5710.0 0.016  
CC 15E 5745.0  -  5825.0 0.0217  

Class II Permissive Change of adding a new antenna described in this filing. Modular. Modular Approval. Power output listed is conducted. This module is approved for use only in the mobile configurations associated with this filing. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. End-users may not be provided with the module installation instructions. Installation of this device into portable RF Exposure category host devices requires the submission of a Class II permissive change or new application. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device supports 20 MHz, 40 MHz and 80 MHz bandwidth modes.


CC: This device is certified pursuant to two different Part 15 rules sections.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

TCB Grant - Application b+NsM7g2C2pJ08tV3N+wWg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Bay Area Compliance Laboratory Corp.
1274 Anvilwood Avenue
Sunnyvale, CA 94089
Date of Grant: 11/05/2021

Application Dated: 11/05/2021
YEALINK (XIAMEN ) NETWORK TECHNOLOGY CO., LTD.
309, 3rd Floor, No.16, Yun Ding North Road,
Huli District,
Xiamen City, Fujian,
China
 
Attention: Stone Lu , Vice General Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  T2C-YL43455
Name of Grantee:  YEALINK (XIAMEN ) NETWORK TECHNOLOGY CO., LTD.
Equipment Class: Digital Transmission System
Notes: Wi-Fi+BT Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.0028  
CC 15C 2412.0  -  2462.0 0.0359  

Modular Approval. Power output listed is peak conducted. This module is approved for use only in the mobile configurations associated with this filing. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. End-users may not be provided with the module installation instructions. Installation of this device into portable RF Exposure category host devices requires the submission of a Class II permissive change or new application. Compliance of this device in all final host configurations is the responsibility of the Grantee.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application b+NsM7g2C2pJ08tV3N+wWg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

YEALINK (XIAMEN ) NETWORK TECHNOLOGY CO., LTD.
309, 3rd Floor, No.16, Yun Ding North Road, Huli District,
Xiamen City, Fujian,
China
  Date of Grant: 11/05/2021

Application Dated: 11/05/2021
 
Attention: Stone Lu , Vice General Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  T2C-YL43455
Name of Grantee:  YEALINK (XIAMEN ) NETWORK TECHNOLOGY CO., LTD.
Equipment Class: Digital Transmission System
Notes: Wi-Fi+BT Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.0028  
CC 15C 2412.0  -  2462.0 0.0359  

Modular Approval. Power output listed is peak conducted. This module is approved for use only in the mobile configurations associated with this filing. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. End-users may not be provided with the module installation instructions. Installation of this device into portable RF Exposure category host devices requires the submission of a Class II permissive change or new application. Compliance of this device in all final host configurations is the responsibility of the Grantee.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application 19xjHyJhz+prhm1fPadYhg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Bay Area Compliance Laboratory Corp.
1274 Anvilwood Avenue
Sunnyvale, CA 94089
Date of Grant: 07/26/2022

Application Dated: 07/26/2022
YEALINK (XIAMEN ) NETWORK TECHNOLOGY CO., LTD.
309, 3rd Floor, No.16, Yun Ding North Road,
Huli District,
Xiamen City, Fujian,
China
 
Attention: Stone Lu , Vice General Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  T2C-YL43455
Name of Grantee:  YEALINK (XIAMEN ) NETWORK TECHNOLOGY CO., LTD.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Wi-Fi+BT Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.0059  

Class II Permissive Change of adding a new antenna described in this filing. Modular Approval. Power output listed is conducted. This module is approved for use only in the mobile configurations associated with this filing. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. End-users may not be provided with the module installation instructions. Installation of this device into portable RF Exposure category host devices requires the submission of a Class II permissive change or new application. Compliance of this device in all final host configurations is the responsibility of the Grantee.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application 19xjHyJhz+prhm1fPadYhg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

YEALINK (XIAMEN ) NETWORK TECHNOLOGY CO., LTD.
309, 3rd Floor, No.16, Yun Ding North Road, Huli District,
Xiamen City, Fujian,
China
  Date of Grant: 07/26/2022

Application Dated: 07/26/2022
 
Attention: Stone Lu , Vice General Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  T2C-YL43455
Name of Grantee:  YEALINK (XIAMEN ) NETWORK TECHNOLOGY CO., LTD.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Wi-Fi+BT Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.0059  

Class II Permissive Change of adding a new antenna described in this filing. Modular Approval. Power output listed is conducted. This module is approved for use only in the mobile configurations associated with this filing. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. End-users may not be provided with the module installation instructions. Installation of this device into portable RF Exposure category host devices requires the submission of a Class II permissive change or new application. Compliance of this device in all final host configurations is the responsibility of the Grantee.


CC: This device is certified pursuant to two different Part 15 rules sections.

Mail To: