FCC ID T4S-70410-QAB

Wireless Access Point

by Honda R&D; Co., Ltd.

Grantee Code: T4S   Product Code: 70410QAB
Latest application date: 2006-06-08

FCC ID Device Details

FCC IDT4S-70410-QAB
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeT4S
Product Code70410QAB
Applicant BusinessHonda R&D; Co., Ltd. 🇯🇵
Related Domains n.w.rd.honda.co.jp
Equipment ClassWireless Access Point
Test FirmCompliance Certification Services

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2412-2462 MHzOriginal Equipment2006-06-08
5180-5240 MHzOriginal Equipment2006-06-08

Exhibits

DocumentTypeAvailableFile
Users ManualUsers Manual2006-06-08PDF 1.2 MB
Users ManualUsers Manual2006-06-08PDF 1.2 MB
Internal PhotosInternal Photos2006-06-08PDF 3.8 MB
External PhotosExternal Photos2006-06-08PDF 897.8 KB
ID LabelID Label/Location Info2006-06-08PDF 272.5 KB
Test Setup PhotosTest Setup Photos2006-06-08PDF 324.6 KB
Test Setup PhotosTest Setup Photos2006-06-08PDF 326.2 KB
Test ReportTest Report2006-06-08PDF 2.9 MB
Test Report 1aTest Report2006-06-08PDF 2.6 MB
Test Report 1bTest Report2006-06-08PDF 1.7 MB
Test Report 2Test Report2006-06-08PDF 1.8 MB
Authorization LetterCover Letter(s)2006-06-08PDF 343.8 KB
Request for ConfidentialityCover Letter(s)2006-06-08PDF 212 KB
MPERF Exposure Info2006-06-08PDF 159.9 KB
Block Diagram Metadata onlyBlock DiagramPDF 26 KB
Schematics Metadata onlySchematicsPDF 988.9 KB
Operational Description Metadata onlyOperational DescriptionPDF 188.5 KB
AP Antenna Specification Metadata onlyParts List/Tune Up InfoPDF 459.6 KB
Antenna Metadata onlyParts List/Tune Up InfoPDF 459.6 KB
Antenna diagram Metadata onlyParts List/Tune Up InfoPDF 72.4 KB

Application Information

Application IDwCzJKSomJyMO1IzFFvqWbQ==
Final Action Date2006-06-08
Application PurposeOriginal Equipment
Applicant FRN0014837512
Model70410-QAB
Frequency Range2412-2462 MHz
Equipment ClassDTS - Digital Transmission System
Device DescriptionWireless Access Point
Responsible PartyToshinobu Hata, Operating Officer General Manager, yoko_saito@n.w.rd.honda.co.jp , 81-48-461-2511
Test FirmBarbara Judge, Compliance Certification Services, bjudge@ccsemc.com , 510-771-1104
TCB Emailmike.kuo@ccsemc.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsPower Output listed is conducted. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device must be marketed for indoor use only.

Applications

Application IDDatePurpose
wCzJKSomJyMO1IzFFvqWbQ==2006-06-08Original Equipment
c2m8QAHPDwX5kjWPxpiWrA==2006-06-08Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2412-2462 MHz0.103000015C20, CC
5180-5240 MHz0.029000015E20, CC

Grants

TCB Grant - Application wCzJKSomJyMO1IzFFvqWbQ==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  UL Verification Services Inc. (formerly UL CCS)
47173 Benicia Street
Fremont, CA 94538
Date of Grant: 06/08/2006

Application Dated: 06/08/2006
Honda R&D Co., Ltd.
1-4-1, Chuo
Wako-shi, Saitama, 351-0193
Japan
 
Attention: Toshinobu Hata , Operating Officer General Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  T4S-70410-QAB
Name of Grantee:  Honda R&D Co., Ltd.
Equipment Class: Digital Transmission System
Notes: Wireless Access Point
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
20 CC 15C 2412.0  -  2462.0 0.103  

Power Output listed is conducted. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device must be marketed for indoor use only.

20: All electrical and mechanical devices employed for spurious radiation suppression, including any modifications made during certification testing, must be incorporated in each unit marketed.
CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application wCzJKSomJyMO1IzFFvqWbQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Honda R&D Co., Ltd.
1-4-1, Chuo
Wako-shi, Saitama, 351-0193
Japan
  Date of Grant: 06/08/2006

Application Dated: 06/08/2006
 
Attention: Toshinobu Hata , Operating Officer General Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  T4S-70410-QAB
Name of Grantee:  Honda R&D Co., Ltd.
Equipment Class: Digital Transmission System
Notes: Wireless Access Point
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
20 CC 15C 2412.0  -  2462.0 0.103  

Power Output listed is conducted. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device must be marketed for indoor use only.


20: All electrical and mechanical devices employed for spurious radiation suppression, including any modifications made during certification testing, must be incorporated in each unit marketed.
CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application c2m8QAHPDwX5kjWPxpiWrA==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  UL Verification Services Inc. (formerly UL CCS)
47173 Benicia Street
Fremont, CA 94538
Date of Grant: 06/08/2006

Application Dated: 06/08/2006
Honda R&D Co., Ltd.
1-4-1, Chuo
Wako-shi, Saitama, 351-0193
Japan
 
Attention: Toshinobu Hata , Operating Officer General Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  T4S-70410-QAB
Name of Grantee:  Honda R&D Co., Ltd.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Wireless Access Point
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
20 CC 15E 5180.0  -  5240.0 0.029  

Power Output listed is conducted. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device must be marketed for indoor use only.

20: All electrical and mechanical devices employed for spurious radiation suppression, including any modifications made during certification testing, must be incorporated in each unit marketed.
CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application c2m8QAHPDwX5kjWPxpiWrA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Honda R&D Co., Ltd.
1-4-1, Chuo
Wako-shi, Saitama, 351-0193
Japan
  Date of Grant: 06/08/2006

Application Dated: 06/08/2006
 
Attention: Toshinobu Hata , Operating Officer General Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  T4S-70410-QAB
Name of Grantee:  Honda R&D Co., Ltd.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Wireless Access Point
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
20 CC 15E 5180.0  -  5240.0 0.029  

Power Output listed is conducted. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device must be marketed for indoor use only.


20: All electrical and mechanical devices employed for spurious radiation suppression, including any modifications made during certification testing, must be incorporated in each unit marketed.
CC: This device is certified pursuant to two different Part 15 rules sections.

Mail To: