FCC ID T68-FT550
FT550 Module
by Fluke Electronics
Grantee Code: T68 Product Code: FT550
Latest application date: 2017-04-26
Device Images
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2402-2480 MHz | Change in identification of presently authorized equipment. Original FCC ID: Z64-WL18SBMOD Grant Date: 02/03/2014 | 2017-04-26 |
| 2402-2480 MHz | Change in identification of presently authorized equipment. Original FCC ID: Z64-WL18SBMOD Grant Date: 02/03/2014 | 2017-04-26 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| External Photos | External Photos | 2017-04-26 | PDF 266.3 KB |
| Label and location | ID Label/Location Info | 2017-04-26 | PDF 1.2 MB |
| Agent Auth | Cover Letter(s) | 2017-04-26 | PDF 77.1 KB |
| Change in ID request | Cover Letter(s) | 2017-04-26 | PDF 70.5 KB |
| Correspondance | Cover Letter(s) | 2017-04-26 | PDF 57.4 KB |
| Cover Letter | Cover Letter(s) | 2017-04-26 | PDF 32.1 KB |
| Modular Checklist | Cover Letter(s) | 2017-04-26 | PDF 54.6 KB |
Application Information
| Application ID | RQWf4TnLNmmcFhcPvnVeFA== |
|---|---|
| Final Action Date | 2017-04-26 |
| Application Purpose | Change in identification of presently authorized equipment. Original FCC ID: Z64-WL18SBMOD Grant Date: 02/03/2014 |
| Applicant FRN | 0001567254 |
| Model | FT550 |
| Frequency Range | 2402-2480 MHz |
| Equipment Class | DSS - Part 15 Spread Spectrum Transmitter |
| Device Description | FT550 Module |
| Responsible Party | James E Lenker, Test Engineer, james.lenker@fluke.com  , 4254465929 |
| Test Firm | Alex Chen, SPORTON International Inc., alex@sporton.com.tw  , 886-3-327-3456 |
| TCB Email | hotline@acbcert.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | No |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Single Modular Approval. Power listed is conducted. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except as in accordance with FCC multi-transmitter product procedures. The antenna(s) used for this transmitter must not exceed a maximum gain of -0.36 dBi. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. End-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| RQWf4TnLNmmcFhcPvnVeFA== | 2017-04-26 | Change in identification of presently authorized equipment. Original FCC ID: Z64-WL18SBMOD Grant Date: 02/03/2014 |
| LC9QkSWXnQqt2RMgFaFonQ== | 2017-04-26 | Change in identification of presently authorized equipment. Original FCC ID: Z64-WL18SBMOD Grant Date: 02/03/2014 |
Equipment Authorization
Grants
TCB Grant - Application RQWf4TnLNmmcFhcPvnVeFA==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 04/26/2017 Application Dated: 04/26/2017 |
| Fluke Electronics |
| 6920 Seaway Blvd |
| P.O. Box 9090, |
| Everett, WA 98203 |
| Attention: James Lenker , Test Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | T68-FT550 |
| Name of Grantee: | Fluke Electronics |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | FT550 Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.0173 |
| Single Modular Approval. Power listed is conducted. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except as in accordance with FCC multi-transmitter product procedures. The antenna(s) used for this transmitter must not exceed a maximum gain of -0.36 dBi. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. End-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. |
EAS Grant - Application RQWf4TnLNmmcFhcPvnVeFA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Fluke Electronics 6920 Seaway Blvd P.O. Box 9090, Everett, WA 98203 United States |
Date of Grant: 04/26/2017 Application Dated: 04/26/2017 |
| Attention: James Lenker , Test Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | T68-FT550 |
| Name of Grantee: | Fluke Electronics |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | FT550 Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.0173 |
| Single Modular Approval. Power listed is conducted. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except as in accordance with FCC multi-transmitter product procedures. The antenna(s) used for this transmitter must not exceed a maximum gain of -0.36 dBi. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. End-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 04/26/2017 Application Dated: 04/26/2017 |
| Fluke Electronics |
| 6920 Seaway Blvd |
| P.O. Box 9090, |
| Everett, WA 98203 |
| Attention: James Lenker , Test Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | T68-FT550 |
| Name of Grantee: | Fluke Electronics |
| Equipment Class: | Digital Transmission System |
| Notes: | FT550 Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| MO | 15C | 2402.0 - 2480.0 | 0.01 | ||
| MO | 15C | 2412.0 - 2462.0 | 0.2438 | ||
| MO | 15C | 2422.0 - 2452.0 | 0.1052 |
| Single Modular Approval. Power listed is maximum combined conducted output power. Device operates with specific antennas in MIMO configurations as described in this filing. Compliance of this device in all final host configurations is the responsibility of the Grantee. This deice is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except as in accordance with FCC multi-transmitter product procedures. The antenna(s) used for this transmitter must not exceed a maximum gain of 1.22 dBi. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. End-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has a 20 and 40 MHz bandwidth mode. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application LC9QkSWXnQqt2RMgFaFonQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Fluke Electronics 6920 Seaway Blvd P.O. Box 9090, Everett, WA 98203 United States |
Date of Grant: 04/26/2017 Application Dated: 04/26/2017 |
| Attention: James Lenker , Test Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | T68-FT550 |
| Name of Grantee: | Fluke Electronics |
| Equipment Class: | Digital Transmission System |
| Notes: | FT550 Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| MO | 15C | 2402.0 - 2480.0 | 0.01 | ||
| MO | 15C | 2412.0 - 2462.0 | 0.2438 | ||
| MO | 15C | 2422.0 - 2452.0 | 0.1052 |
| Single Modular Approval. Power listed is maximum combined conducted output power. Device operates with specific antennas in MIMO configurations as described in this filing. Compliance of this device in all final host configurations is the responsibility of the Grantee. This deice is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except as in accordance with FCC multi-transmitter product procedures. The antenna(s) used for this transmitter must not exceed a maximum gain of 1.22 dBi. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. End-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has a 20 and 40 MHz bandwidth mode. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: |