FCC ID T7VEBMU
Bluetooth Module
by Panasonic Industrial Devices Europe GmbH
Grantee Code: T7V Product Code: EBMU
Latest application date: 2016-01-29
Device Images
FCC ID Device Details
| FCC ID | T7VEBMU |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | T7V |
| Product Code | EBMU |
| Applicant Business | Panasonic Industrial Devices Europe GmbH 🇩🇪 |
| Related Domains |  eu.panasonic.com |
| Equipment Class | Bluetooth Module |
| Test Firm | Eurofins Product Service GmbH |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2016-01-29 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2014-04-16 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2009-10-16 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2009-02-26 |
| 2402-2480 MHz | Change in identification of presently authorized equipment. Original FCC ID: Q2331308 Grant Date: 01/12/2007 | 2009-02-23 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| 15_PAN1320 UserMan_Rev1.2 | Users Manual | 2016-01-29 | PDF 1.6 MB |
| UserMan | Users Manual | 2014-04-16 | PDF 2.9 MB |
| 09_PAN1320 IntPho | Internal Photos | 2016-01-29 | PDF 59.1 KB |
| IntPho | Internal Photos | 2014-04-16 | PDF 51.9 KB |
| PAN1310 IntPho | Internal Photos | 2009-10-16 | PDF 158.6 KB |
| 08_PAN1320 ExtPho | External Photos | 2016-01-29 | PDF 95.6 KB |
| ExtPho | External Photos | 2014-04-16 | PDF 78.6 KB |
| External appearance | External Photos | 2009-02-23 | PDF 64.4 KB |
| 06_07_LabelSampel_Location | ID Label/Location Info | 2016-01-29 | PDF 71.3 KB |
| LabelLoc | ID Label/Location Info | 2014-04-16 | PDF 346.3 KB |
| LabelSmpl | ID Label/Location Info | 2014-04-16 | PDF 346.3 KB |
| PAN1310 LabelLoc | ID Label/Location Info | 2009-10-16 | PDF 182.6 KB |
| PAN1310 LabelSmpl | ID Label/Location Info | 2009-10-16 | PDF 182.8 KB |
| Label art | ID Label/Location Info | 2009-02-26 | PDF 10.7 KB |
| ID label | ID Label/Location Info | 2009-02-23 | PDF 9.8 KB |
| 17a_PAN1320 AntSpec | Operational Description | 2016-01-29 | PDF 358.7 KB |
| 17b_PAN1320 Antenna Description | Operational Description | 2016-01-29 | PDF 522.7 KB |
| PAN1310 AntSpec | Operational Description | 2009-10-16 | PDF 226 KB |
| 10_PAN1320 TSup | Test Setup Photos | 2016-01-29 | PDF 239.9 KB |
| TestSup | Test Setup Photos | 2014-04-16 | PDF 51.2 KB |
| PAN1310 TSup | Test Setup Photos | 2009-10-16 | PDF 317.7 KB |
| 14a_PAN1320 TestRep | Test Report | 2016-01-29 | PDF 1.1 MB |
| 14b_PAN1320 TestRep | Test Report | 2016-01-29 | PDF 2.7 MB |
| TestRep | Test Report | 2014-04-16 | PDF 1.4 MB |
| PAN1310 TRpt | Test Report | 2009-10-16 | PDF 993.6 KB |
| Test report | Test Report | 2009-02-26 | PDF 1.3 MB |
| 04_PAN1320_AuthLet | Attestation Statements | 2016-01-29 | PDF 323.7 KB |
| 05_PAN1320_ConReq | Cover Letter(s) | 2016-01-29 | PDF 412.5 KB |
| 30_PAN1320 ChLet_Rev01 | Cover Letter(s) | 2016-01-29 | PDF 312.2 KB |
| AutLet | Cover Letter(s) | 2014-04-16 | PDF 317.6 KB |
| CIIPChLetter | Cover Letter(s) | 2014-04-16 | PDF 305 KB |
| ConReq | Cover Letter(s) | 2014-04-16 | PDF 396.6 KB |
| PAN1310 ClassIIPCH Letter | Cover Letter(s) | 2009-10-16 | PDF 175 KB |
| PAN1310 ConReq | Cover Letter(s) | 2009-10-16 | PDF 215 KB |
| Pan1310 AutLet | Cover Letter(s) | 2009-10-16 | PDF 175 KB |
| Confidentiality request | Cover Letter(s) | 2009-02-26 | PDF 15 KB |
| Description of change | Cover Letter(s) | 2009-02-26 | PDF 211.8 KB |
| Power of attorney | Cover Letter(s) | 2009-02-26 | PDF 195.5 KB |
| Original Grantee authorization | Cover Letter(s) | 2009-02-23 | PDF 182.5 KB |
| Request for change in ID | Cover Letter(s) | 2009-02-23 | PDF 17.4 KB |
| 18_PAN1320 RFExp | RF Exposure Info | 2016-01-29 | PDF 778.8 KB |
| RFExp | RF Exposure Info | 2014-04-16 | PDF 688.6 KB |
| BlkDia Metadata only | Block Diagram | PDF 112 KB | |
| Schem Metadata only | Schematics | PDF 29.7 KB | |
| AntSpec Metadata only | Operational Description | PDF 311 KB | |
| OpDes Metadata only | Operational Description | PDF 1.1 MB | |
| PartsLst Metadata only | Parts List/Tune Up Info | PDF 29.7 KB |
Application Information
| Application ID | NgOPsBPM0b3KProvbs9xxg== |
|---|---|
| Final Action Date | 2016-01-29 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0014980072 |
| Model | EBMU |
| Frequency Range | 2402-2480 MHz |
| Equipment Class | DSS - Part 15 Spread Spectrum Transmitter |
| Device Description | Bluetooth Module |
| Responsible Party | Olaf Knoth, Product Safety, olaf.knoth@eu.panasonic.com , +49-4131-899 |
| Technical Contact | Ingo Knoth, Panasonic Industrial Devices Europe GmbH, Ingo.Wagner@eu.panasonic.com , 00413189 |
| Test Firm | Robert Kschiwan-Kaspar, Eurofins Product Service GmbH, rkk@eurofins.de  , 49-33631-888-000 |
| TCB Email | joergkkusig@eurofins.de |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Power Output listed is conducted. Single Modular Approval. The antenna(s) used for this device must be used in accordance with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 or KDB 447498. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| NgOPsBPM0b3KProvbs9xxg== | 2016-01-29 | Class II permissive change or modification of presently authorized equipment |
| y/Q5sqCzoAhb/vvjWsNN0g== | 2014-04-16 | Class II permissive change or modification of presently authorized equipment |
| xsrZvoZnWuyBs0PNJVJ/QA== | 2009-10-16 | Class II permissive change or modification of presently authorized equipment |
| KcBzXIKhT7K/2Qm7AxsH0g== | 2009-02-26 | Class II permissive change or modification of presently authorized equipment |
| Wu/ymNvvFhpNDxOG9qbTFg== | 2009-02-23 | Change in identification of presently authorized equipment. Original FCC ID: Q2331308 Grant Date: 01/12/2007 |
Grants
TCB Grant - Application y/Q5sqCzoAhb/vvjWsNN0g==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Eurofins Product Service GmbH Storkower Strasse 38c D-15526 Reichenwalde, Germany |
Date of Grant: 04/16/2014 Application Dated: 04/16/2014 |
| Panasonic Industrial Devices Europe GmbH |
| Zeppelinstrasse 19 |
| Lueneburg, 21337 Germany |
| Attention: Olaf Knoth , Product Safety |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | T7VEBMU |
| Name of Grantee: | Panasonic Industrial Devices Europe GmbH |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Bluetooth Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.00122 |
| Modular Approval. Power Output is Conducted. Approval is limited to OEM installation only. The antenna used for this transmitter must not be co-located with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. OEM integrators and End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
EAS Grant - Application y/Q5sqCzoAhb/vvjWsNN0g==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Panasonic Industrial Devices Europe GmbH Zeppelinstrasse 19 Lueneburg, 21337 Germany |
Date of Grant: 04/16/2014 Application Dated: 04/16/2014 |
| Attention: Olaf Knoth , Product Safety |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | T7VEBMU |
| Name of Grantee: | Panasonic Industrial Devices Europe GmbH |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Bluetooth Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.00122 |
| Modular Approval. Power Output is Conducted. Approval is limited to OEM installation only. The antenna used for this transmitter must not be co-located with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. OEM integrators and End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Eurofins Product Service GmbH Storkower Strasse 38c D-15526 Reichenwalde, Germany |
Date of Grant: 10/16/2009 Application Dated: 10/16/2009 |
| Panasonic Industrial Devices Europe GmbH |
| Zeppelinstrasse 19 |
| Lueneburg, 21337 Germany |
| Attention: Olaf Knoth , Product Safety |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | T7VEBMU |
| Name of Grantee: | Panasonic Industrial Devices Europe GmbH |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Bluetooth EDR Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.00122 |
| Modular Approval. Power Output is Conducted. Measured EIRP is 2.4 mW with antenna as documented in this Permissive Change. Approval is limited to OEM installation only. The antenna used for this transmitter must not be co-located with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. OEM integrators and End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
EAS Grant - Application xsrZvoZnWuyBs0PNJVJ/QA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Panasonic Industrial Devices Europe GmbH Zeppelinstrasse 19 Lueneburg, 21337 Germany |
Date of Grant: 10/16/2009 Application Dated: 10/16/2009 |
| Attention: Olaf Knoth , Product Safety |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | T7VEBMU |
| Name of Grantee: | Panasonic Industrial Devices Europe GmbH |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Bluetooth EDR Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.00122 |
| Modular Approval. Power Output is Conducted. Measured EIRP is 2.4 mW with antenna as documented in this Permissive Change. Approval is limited to OEM installation only. The antenna used for this transmitter must not be co-located with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. OEM integrators and End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Intertek Testing Services NA, Inc. 70 Codman Hill Road Boxborough, MA 01719 |
Date of Grant: 02/23/2009 Application Dated: 02/23/2009 |
| Panasonic Industrial Devices Europe GmbH |
| Zeppelinstrasse 19 |
| Lueneburg, 21337 Germany |
| Attention: Olaf Knoth , Product Safety |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | T7VEBMU |
| Name of Grantee: | Panasonic Industrial Devices Europe GmbH |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | PAN1311 Bluetooth module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.00122 |
| Modular Approval. Power Output is Conducted. Approval is limited to OEM installation only. The only antenna approved for use with this module is documented in the filing, and must be installed in the manner specified therein. The antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
EAS Grant - Application Wu/ymNvvFhpNDxOG9qbTFg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Panasonic Industrial Devices Europe GmbH Zeppelinstrasse 19 Lueneburg, 21337 Germany |
Date of Grant: 02/23/2009 Application Dated: 02/23/2009 |
| Attention: Olaf Knoth , Product Safety |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | T7VEBMU |
| Name of Grantee: | Panasonic Industrial Devices Europe GmbH |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | PAN1311 Bluetooth module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.00122 |
| Modular Approval. Power Output is Conducted. Approval is limited to OEM installation only. The only antenna approved for use with this module is documented in the filing, and must be installed in the manner specified therein. The antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Eurofins Product Service GmbH Storkower Strasse 38c D-15526 Reichenwalde, Germany |
Date of Grant: 01/29/2016 Application Dated: 01/29/2016 |
| Panasonic Industrial Devices Europe GmbH |
| Zeppelinstrasse 19 |
| Lueneburg, 21337 Germany |
| Attention: Olaf Knoth , Product Safety |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | T7VEBMU |
| Name of Grantee: | Panasonic Industrial Devices Europe GmbH |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Bluetooth Module |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.002 |
| Power Output listed is conducted. Single Modular Approval. The antenna(s) used for this device must be used in accordance with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 or KDB 447498. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. |
EAS Grant - Application NgOPsBPM0b3KProvbs9xxg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Panasonic Industrial Devices Europe GmbH Zeppelinstrasse 19 Lueneburg, 21337 Germany |
Date of Grant: 01/29/2016 Application Dated: 01/29/2016 |
| Attention: Olaf Knoth , Product Safety |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | T7VEBMU |
| Name of Grantee: | Panasonic Industrial Devices Europe GmbH |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Bluetooth Module |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.002 |
| Power Output listed is conducted. Single Modular Approval. The antenna(s) used for this device must be used in accordance with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 or KDB 447498. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Intertek Testing Services NA, Inc. 70 Codman Hill Road Boxborough, MA 01719 |
Date of Grant: 02/26/2009 Application Dated: 02/26/2009 |
| Panasonic Industrial Devices Europe GmbH |
| Zeppelinstrasse 19 |
| Lueneburg, 21337 Germany |
| Attention: Olaf Knoth , Product Safety |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | T7VEBMU |
| Name of Grantee: | Panasonic Industrial Devices Europe GmbH |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | PAN1321 Bluetooth module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.00122 |
| Modular Approval. Power Output is Conducted. Measured EIRP is 0.35 mW with antenna as documented in this Permissive Change. Approval is limited to OEM installation only. The antenna used for this transmitter must not be co-located with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. OEM integrators and End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
EAS Grant - Application KcBzXIKhT7K/2Qm7AxsH0g==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Panasonic Industrial Devices Europe GmbH Zeppelinstrasse 19 Lueneburg, 21337 Germany |
Date of Grant: 02/26/2009 Application Dated: 02/26/2009 |
| Attention: Olaf Knoth , Product Safety |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | T7VEBMU |
| Name of Grantee: | Panasonic Industrial Devices Europe GmbH |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | PAN1321 Bluetooth module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.00122 |
| Modular Approval. Power Output is Conducted. Measured EIRP is 0.35 mW with antenna as documented in this Permissive Change. Approval is limited to OEM installation only. The antenna used for this transmitter must not be co-located with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. OEM integrators and End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
| Mail To: |