FCC ID T82-HRFSG01US

T82HRFSG01US, T82 HRFSG01US, T82-HRFSG01US, T82-HRFSGO1US, T82-HRFSG0IUS, T82-HRF5G01U5

Herutu Electronics Corporation Sub-GHz Wireless module HRFSG01US

An FCC ID is the product ID assigned by the FCC to identify wireless products in the market. The FCC chooses 3 or 5 character "Grantee" codes to identify the business that created the product. For example, the grantee code for FCC ID: T82-HRFSG01US is T82. The remaining characters of the FCC ID, -HRFSG01US, are often associated with the product model, but they can be random. These letters are chosen by the applicant. In addition to the application, the FCC also publishes internal images, external images, user manuals, and test results for wireless devices. They can be under the "exhibits" tab below.

Purchase on Amazon: Sub-GHz Wireless module

Application: Sub-GHz Wireless module
Equipment Class: DTS - Digital Transmission System
Short Link: fcc.id/T82-HRFSG01US
Sources: FCC.gov | FCC.report
Registered By: Herutu Electronics Corporation - T82 (Japan)

App #	Purpose	Date	Unique ID
1	Original Equipment	2023-02-13	w/07s0v6WzjJWJ+KG2nggQ==

Operating Frequencies

Frequency Range	Power Output	Rule Parts	Line Entry
902.6-927.4 MHz	24.6 mW	15C	1

Exhibits

Document	Type	Submitted Available
02 FCC Agent for service Attestation from Applicant_Rev	Attestation Statements Adobe Acrobat PDF (251 kB)	2023-05-23 2023-02-13
02 FCC Agent for service Attestation from Agent_Rev	Attestation Statements Adobe Acrobat PDF (414 kB)	2023-05-23 2023-02-13
02 FCC Agent for service Attestation from Applicant	Attestation Statements Adobe Acrobat PDF (246 kB)	2023-02-12 2023-02-13
02 FCC Agent for service Attestation from Agent	Attestation Statements Adobe Acrobat PDF (225 kB)	2023-02-12 2023-02-13
02 FCC 2.911[d][5] Attestation	Attestation Statements Adobe Acrobat PDF (206 kB)	2023-02-12 2023-02-13
05 User Manual_Revised	Users Manual Adobe Acrobat PDF (389 kB)	2023-02-02 2023-02-13
06 Label and Location	ID Label/Location Info Adobe Acrobat PDF (477 kB)	2023-01-11 2023-02-13
04 Internal Photo	Internal Photos Adobe Acrobat PDF (240 kB)	2023-01-11 2023-02-13
04 External Photo	External Photos Adobe Acrobat PDF (145 kB)	2023-01-11 2023-02-13
03 FCC Test Setup Photo_DTS	Test Setup Photos Adobe Acrobat PDF (610 kB)	2023-01-11 2023-02-13
03 FCC Test Report_DTS	Test Report Adobe Acrobat PDF (1065 kB)	2023-01-11 2023-02-13
03 FCC RF Exposure	RF Exposure Info Adobe Acrobat PDF (17 kB)	2023-01-11 2023-02-13
03 Antenna Specification_2. Dipole	Test Report Adobe Acrobat PDF (886 kB)	2023-01-11 2023-02-13
03 Antenna Specification_1. Monopole	Test Report Adobe Acrobat PDF (948 kB)	2023-01-11 2023-02-13
03 Antenna List	Test Report Adobe Acrobat PDF (341 kB)	2023-01-11 2023-02-13
02 FCC Request for Confidentiality Letter	Cover Letter(s) Adobe Acrobat PDF (172 kB)	2023-01-11 2023-02-13
02 FCC LMA Letter	Cover Letter(s) Adobe Acrobat PDF (385 kB)	2023-01-11 2023-02-13
02 FCC Authorization Letter	Cover Letter(s) Adobe Acrobat PDF (232 kB)	2023-01-11 2023-02-13
08 Confidential_Theory of Operation	Operational Description Adobe Acrobat PDF (177 kB)	2023-01-11
07 Confidential_Block Diagram	Block Diagram Adobe Acrobat PDF (54 kB)	2023-01-11
09 Confidential_Schematics	Schematics Adobe Acrobat PDF (123 kB)	2023-01-11
05 User Manual	Users Manual Adobe Acrobat PDF (630 kB)	2023-01-11 2023-02-13

Application Forms

Application for Equipment Authorization FCC Form 731 TCB Version

Applicant Information

Applicant's complete, legal business name:	Herutu Electronics Corporation
FCC Registration Number (FRN):	0015040488
Alphanumeric FCC ID:	T82HRFSG01US
Unique Application Identifier:	w/07s0v6WzjJWJ+KG2nggQ==
Line one:	422-1 Higashimikata-cho
City:	Kita-ku Hamamatsu Shizuoka
State:	N/A
Country:	Japan
Zip Code:	433-8104

TCB Information

TCB Application Email Address:	LST.FRE.CertNotice@ul.com
TCB Scope:	A4: UNII devices & low power transmitters using spread spectrum techniques

FCC ID

Grantee Code:	T82
Product Code:	-HRFSG01US

Person at the applicant's address to receive grant or for contact

Name:

Yoshiyasu Ueda

Telephone Number:

+81-53-438-3511

Extension:

Fax Number:	+81-53-438-3411
Email:	y-ueda@herutu.co.jp

Technical Contact

Firm Name:	UL Japan, Inc.
First Name:	Satofumi
Last Name:	Matsuyama
Line 1:	4383-326 Asama-cho, Ise-shi
City:	Mie-ken
Country:	Japan
Zip Code:	516-0021

Telephone Number:

81-596-24-8999

Extension:

Fax Number:	81-596-24-8124
E-Mail:	Satofumi.Matsuyama@ul.com

Long-Term Confidentiality

Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: Yes

Short-Term Confidentiality

Does short-term confidentiality apply to this application?: No

If so, specify the short-term confidentiality release date (MM/DD/YYYY format):
Note: If no date is supplied, the release date will be set to 45 calendar days past the date of grant.

Software Defined/Cognitive Radio

Is this application for software defined/cognitive radio authorization? No

Equipment Class

Equipment Class: DTS - Digital Transmission System
Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant):	Sub-GHz Wireless module

Related OET KnowledgeDataBase Inquiry

Is there a KDB inquiry associated with this application? Yes

Modular Equipment

Modular Type: Limited Single Modular Approval

Application Purpose

Application is for: Original Equipment

Composite/Related Equipment

Is the equipment in this application a composite device subject to an additional equipment authorization? No

Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? No

Test Firm Information

Name of test firm and contact person on file with the FCC:

Firm Name: UL Japan, Inc.(Ise)

First Name: Takayuki

Last Name: Shimada

Telephone Number:

81-596-24-8999

Extension:

Fax Number: 81-596-24-8124

E-mail: Takayuki.Shimada@ul.com

Grant Comments

Enter any text that you would like to appear at the bottom of the Grant of Equipment Authorization:
Limited Modular Approval. Host systems must provide regulated supply voltages to the module. Output power listed is Conducted (Peak). Separate evaluation must be required for any portable configuration. When used in mobile applications, the module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Compliance of this device in all final host configurations is the responsibility of the Grantee. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The host integrator is instructed to ensure that the end user has no manual instructions to remove or install the device. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided.

Set the grant of this application to be deferred to a specified date:
No

Equipment Authorization Waiver

Is there an equipment authorization waiver associated with this application? No

If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?: No

WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND IMPRISONMENT (U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1)), AND/OR FORFEITURE (U.S. CODE, TITLE 47, SECTION 503).

SECTION 5301 (ANTI-DRUG ABUSE) CERTIFICATION:

The applicant must certify that neither the applicant nor any party to the application is subject to a denial of Federal benefits, that include FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. § 862 because of a conviction for possession or distribution of a controlled substance. See 47 CFR 1.2002(b) for the definition of a "party" for these purposes.

Does the applicant or authorized agent so certify? Yes

Applicant/Agent Certification:

I certify that I am authorized to sign this application. All of the statements herein and the exhibits attached hereto, are true and correct to the best of my knowledge and belief. In accepting a Grant of Equipment Authorization as a result of the representations made in this application, the applicant is responsible for (1) labeling the equipment with the exact FCC ID specified in this application, (2) compliance statement labeling pursuant to the applicable rules, and (3) compliance of the equipment with the applicable technical rules. If the applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC's technical requirements.

Authorizing an agent to sign this application, is done solely at the applicant's discretion; however, the applicant remains responsible for all statements in this application.

If an agent has signed this application on behalf of the applicant, a written letter of authorization which includes information to enable the agent to respond to the above section 5301 (Anti-Drug Abuse) Certification statement has been provided by the applicant. It is understood that the letter of authorization must be submitted to the FCC upon request, and that the FCC reserves the right to contact the applicant directly at any time.

Signature of Authorized Person Filing: Akiko Nishimura

Title of authorized signature: Project Coordinator

Complete items below if agent signs the application:

Firm Name: UL Japan, Inc.

Name: Akiko Akiko Akiko

Line 1: Akiko

Line 2: Akiko

P.O. Box: Akiko

City: Akiko

State: Akiko

Country: Akiko

Zip Code: Akiko

Telephone Number:

81-596-24-8999

Fax Number: 81-596-24-8124

E-mail: Akiko.Nishimura@ul.com

Grants

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

UL Verification Services Inc.
47173 Benicia Street
Fremont, CA 94538

Date of Grant: 02/13/2023

Application Dated: 01/11/2023

Herutu Electronics Corporation

422-1 Higashimikata-cho

Kita-ku Hamamatsu Shizuoka, 433-8104
Japan

Attention: Yoshiyasu Ueda

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	T82-HRFSG01US

Name of Grantee:	Herutu Electronics Corporation

Equipment Class:	Digital Transmission System
Notes:	Sub-GHz Wireless module
Modular Type:	Limited Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
	15C	902.6 - 927.4	0.0246

Limited Modular Approval. Host systems must provide regulated supply voltages to the module. Output power listed is Conducted (Peak). Separate evaluation must be required for any portable configuration. When used in mobile applications, the module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Compliance of this device in all final host configurations is the responsibility of the Grantee. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The host integrator is instructed to ensure that the end user has no manual instructions to remove or install the device. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Herutu Electronics Corporation
422-1 Higashimikata-cho
Kita-ku Hamamatsu Shizuoka, 433-8104
Japan

Date of Grant: 02/13/2023

Application Dated: 01/11/2023

Attention: Yoshiyasu Ueda

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	T82-HRFSG01US

Name of Grantee:	Herutu Electronics Corporation

Equipment Class:	Digital Transmission System
Notes:	Sub-GHz Wireless module
Modular Type:	Limited Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
	15C	902.6 - 927.4	0.0246

Mail To:

EA971775

FCC ID T82-HRFSG01US

T82HRFSG01US, T82 HRFSG01US, T82-HRFSG01US, T82-HRFSGO1US, T82-HRFSG0IUS, T82-HRF5G01U5

Herutu Electronics Corporation Sub-GHz Wireless module HRFSG01US

Purchase on Amazon: Sub-GHz Wireless module

Operating Frequencies

Exhibits

Application Forms

Applications are submitted for FCC ID and Grant requests. Click an above application to view details

Grants

Grants authorize equipment for operation at approved frequencies and sale within the USA. Click an above grant to view details