FCC ID TBUAGXISWL
WIFI Modular
by BARTEC
Grantee Code: TBU Product Code: AGXISWL
Latest application date: 2017-04-21
Device Images
FCC ID Device Details
| FCC ID | TBUAGXISWL |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | TBU |
| Product Code | AGXISWL |
| Applicant Business | BARTEC 🇩🇪 |
| Related Domains |  bartec.de  isl.com.tw |
| Equipment Class | WIFI Modular |
| Test Firm | International Standards Laboratory Corp. |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2017-04-21 |
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2017-04-21 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2017-04-21 |
| 2402-2480 MHz | Change in identification of presently authorized equipment. Original FCC ID: ZQ6-AP6356SDXX Grant Date: 10/10/2016 | 2017-03-06 |
| 5180-5240 MHz | Change in identification of presently authorized equipment. Original FCC ID: ZQ6-AP6356SDXX Grant Date: 10/10/2016 | 2017-03-06 |
| 2402-2480 MHz | Change in identification of presently authorized equipment. Original FCC ID: ZQ6-AP6356SDXX Grant Date: 10/10/2016 | 2017-03-06 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Users Manual | Users Manual | 2017-04-21 | PDF 1.7 MB |
| Internal Photos | Internal Photos | 2017-04-21 | PDF 1.7 MB |
| External Photos | External Photos | 2017-04-21 | PDF 120.3 KB |
| External Photos | External Photos | 2017-03-06 | PDF 32.9 KB |
| ID Label/Location Info | ID Label/Location Info | 2017-04-21 | PDF 141.4 KB |
| ID Label/Location Info | ID Label/Location Info | 2017-03-06 | PDF 33.3 KB |
| Test Setup Photos for SAR | Test Setup Photos | 2017-04-21 | PDF 829.7 KB |
| SAR Test Report | RF Exposure Info | 2017-04-21 | PDF 3.4 MB |
| Class II permissive change letter | Cover Letter(s) | 2017-04-21 | PDF 99.2 KB |
| Confidentiality | Cover Letter(s) | 2017-04-21 | PDF 76.7 KB |
| Declaration of authorization | Cover Letter(s) | 2017-04-21 | PDF 50.8 KB |
| Declaration of Identity | Cover Letter(s) | 2017-03-06 | PDF 50.6 KB |
| Declaration of authorization | Cover Letter(s) | 2017-03-06 | PDF 85.9 KB |
| FCC Authorization letter | Cover Letter(s) | 2017-03-06 | PDF 209.5 KB |
| Appendix D Metadata only | RF Exposure Info | 2017-04-21 | PDF 2.3 MB |
| Appendix D_revised0418 | RF Exposure Info | 2017-04-21 | PDF 2.8 MB |
| Software Security Info Metadata only | Operational Description | PDF 165.9 KB |
Application Information
| Application ID | rtthB58hA5v9N8ulqm7alg== |
|---|---|
| Final Action Date | 2017-04-21 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0013483649 |
| Model | AGXISWL |
| Frequency Range | 2402-2480 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | WIFI Modular |
| Responsible Party | Benedikt Eckert, benedikt.eckert@bartec.de , 00497931597 |
| Technical Contact | Vincent Su, International Standards Laboratory, vincent_wh_su@isl.com.tw , 886-2-6612-3337 |
| Non-Technical Contact | Vincent Su, International Standards Laboratory, vincent_wh_su@isl.com.tw , 886-2-6612-3337 |
| Test Firm | Angus Chu, International Standards Laboratory Corp., angus_chu@isl.com.tw , 886-3-263-8888 |
| TCB Email | certification@telefication.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Class II change: This Class II Change incorporates this Module into a Tablet PC as described in this filing. Any configuration other than the one described will require a separate approval. End-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. The highest reported SAR values for body, and simulteneous transmission use conditions are: 0.71W/kg, and 0.98W/kg, respectively Output power listed is conducted. Single Modular Approval for portable RF Exposure conditions. This device must be used with antennas identified in this filing, or those having a gain of less than 5.5 dBi, and must not be co-located or operating in conjunction with any other antenna or transmitter. The antennas used for this transmitter must be installed to provide a separation distance of at least 0.5-cm from all persons. Approval is limited to OEM installation only. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The highest reported SAR for this device is 0.73 W/kg. This device supports 20 and 40 MHz modes. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| rtthB58hA5v9N8ulqm7alg== | 2017-04-21 | Class II permissive change or modification of presently authorized equipment |
| UVNAIwbmkXA0b7q9bDwvTQ== | 2017-04-21 | Class II permissive change or modification of presently authorized equipment |
| +inPwwoyfCe80YBOvQidvQ== | 2017-04-21 | Class II permissive change or modification of presently authorized equipment |
| t6z3C8hONHXFFAlK4DlxLg== | 2017-03-06 | Change in identification of presently authorized equipment. Original FCC ID: ZQ6-AP6356SDXX Grant Date: 10/10/2016 |
| s/+6Fs/FmG7cUAJnFzPXow== | 2017-03-06 | Change in identification of presently authorized equipment. Original FCC ID: ZQ6-AP6356SDXX Grant Date: 10/10/2016 |
| Z8hQFaPXeUGin5eJZSjpWw== | 2017-03-06 | Change in identification of presently authorized equipment. Original FCC ID: ZQ6-AP6356SDXX Grant Date: 10/10/2016 |
Equipment Authorization
Grants
TCB Grant - Application Z8hQFaPXeUGin5eJZSjpWw==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Telefication B.V. Wilmersdorf 50 Apeldoorn, NL-7300 AC Netherlands |
Date of Grant: 03/06/2017 Application Dated: 02/20/2017 |
| BARTEC |
| Max-Eyth-Strasse 16 |
| Bad Mergentheim, 97980 Germany |
| Attention: Benedikt Eckert |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | TBUAGXISWL |
| Name of Grantee: | BARTEC |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | WIFI Modular |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.006 |
| Output power listed is conducted. Single Modular Approval for portable RF Exposure conditions. This device must be used with antennas identified in this filing, or those having a gain of less than 5.5 dBi, and must not be co-located or operating in conjunction with any other antenna or transmitter. The antennas used for this transmitter must be installed to provide a separation distance of at least 0.5-cm from all persons. Approval is limited to OEM installation only. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.. The highest reported SAR for this device is <0.10 W/kg. This device supports 20 and 40 MHz modes. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application Z8hQFaPXeUGin5eJZSjpWw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
BARTEC Max-Eyth-Strasse 16 Bad Mergentheim, 97980 Germany |
Date of Grant: 03/06/2017 Application Dated: 02/20/2017 |
| Attention: Benedikt Eckert |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | TBUAGXISWL |
| Name of Grantee: | BARTEC |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | WIFI Modular |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.006 |
| Output power listed is conducted. Single Modular Approval for portable RF Exposure conditions. This device must be used with antennas identified in this filing, or those having a gain of less than 5.5 dBi, and must not be co-located or operating in conjunction with any other antenna or transmitter. The antennas used for this transmitter must be installed to provide a separation distance of at least 0.5-cm from all persons. Approval is limited to OEM installation only. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.. The highest reported SAR for this device is <0.10 W/kg. This device supports 20 and 40 MHz modes. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Telefication B.V. Wilmersdorf 50 Apeldoorn, NL-7300 AC Netherlands |
Date of Grant: 04/21/2017 Application Dated: 04/17/2017 |
| BARTEC |
| Max-Eyth-Strasse 16 |
| Bad Mergentheim, 97980 Germany |
| Attention: Benedikt Eckert |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | TBUAGXISWL |
| Name of Grantee: | BARTEC |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | WIFI Modular |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC MO | 15E | 5180.0 - 5240.0 | 0.017 | ||
| 38 CC MO | 15E | 5745.0 - 5825.0 | 0.019 | ||
| 38 CC MO | 15E | 5260.0 - 5320.0 | 0.019 | ||
| 38 CC MO | 15E | 5500.0 - 5700.0 | 0.019 |
| Class II change: a. This Class II Change incorporates this Module into a Tablet PC as described in this filing. Any configuration other than the one described will require a separate approval. End-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. The highest reported SAR values for body, and simulteneous transmission use conditions are: 0.97W/kg, and 0.98W/kg, respectively. b. The frequency band of 5600 to 5650MHz is disabled via Software. Output power listed is conducted. Single Modular Approval for portable RF Exposure conditions. This device must be used with antennas identified in this filing, or those having a gain of less than 5.5 dBi, and must not be co-located or operating in conjunction with any other antenna or transmitter. The antennas used for this transmitter must be installed to provide a separation distance of at least 0.5-cm from all persons. Approval is limited to OEM installation only. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The highest reported SAR for this device is 0.35 W/kg. This device supports 20, 40, and 80 MHz modes. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application UVNAIwbmkXA0b7q9bDwvTQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
BARTEC Max-Eyth-Strasse 16 Bad Mergentheim, 97980 Germany |
Date of Grant: 04/21/2017 Application Dated: 04/17/2017 |
| Attention: Benedikt Eckert |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | TBUAGXISWL |
| Name of Grantee: | BARTEC |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | WIFI Modular |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC MO | 15E | 5180.0 - 5240.0 | 0.017 | ||
| 38 CC MO | 15E | 5745.0 - 5825.0 | 0.019 | ||
| 38 CC MO | 15E | 5260.0 - 5320.0 | 0.019 | ||
| 38 CC MO | 15E | 5500.0 - 5700.0 | 0.019 |
| Class II change: a. This Class II Change incorporates this Module into a Tablet PC as described in this filing. Any configuration other than the one described will require a separate approval. End-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. The highest reported SAR values for body, and simulteneous transmission use conditions are: 0.97W/kg, and 0.98W/kg, respectively. b. The frequency band of 5600 to 5650MHz is disabled via Software. Output power listed is conducted. Single Modular Approval for portable RF Exposure conditions. This device must be used with antennas identified in this filing, or those having a gain of less than 5.5 dBi, and must not be co-located or operating in conjunction with any other antenna or transmitter. The antennas used for this transmitter must be installed to provide a separation distance of at least 0.5-cm from all persons. Approval is limited to OEM installation only. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The highest reported SAR for this device is 0.35 W/kg. This device supports 20, 40, and 80 MHz modes. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Telefication B.V. Wilmersdorf 50 Apeldoorn, NL-7300 AC Netherlands |
Date of Grant: 03/06/2017 Application Dated: 02/20/2017 |
| BARTEC |
| Max-Eyth-Strasse 16 |
| Bad Mergentheim, 97980 Germany |
| Attention: Benedikt Eckert |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | TBUAGXISWL |
| Name of Grantee: | BARTEC |
| Equipment Class: | Digital Transmission System |
| Notes: | WIFI Modular |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2402.0 - 2480.0 | 0.005 | ||
| CC MO | 15C | 2412.0 - 2462.0 | 0.031 |
| Output power listed is conducted. Single Modular Approval for portable RF Exposure conditions. This device must be used with antennas identified in this filing, or those having a gain of less than 5.5 dBi, and must not be co-located or operating in conjunction with any other antenna or transmitter. The antennas used for this transmitter must be installed to provide a separation distance of at least 0.5-cm from all persons. Approval is limited to OEM installation only. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The highest reported SAR for this device is 0.73 W/kg. This device supports 20 and 40 MHz modes. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application t6z3C8hONHXFFAlK4DlxLg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
BARTEC Max-Eyth-Strasse 16 Bad Mergentheim, 97980 Germany |
Date of Grant: 03/06/2017 Application Dated: 02/20/2017 |
| Attention: Benedikt Eckert |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | TBUAGXISWL |
| Name of Grantee: | BARTEC |
| Equipment Class: | Digital Transmission System |
| Notes: | WIFI Modular |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2402.0 - 2480.0 | 0.005 | ||
| CC MO | 15C | 2412.0 - 2462.0 | 0.031 |
| Output power listed is conducted. Single Modular Approval for portable RF Exposure conditions. This device must be used with antennas identified in this filing, or those having a gain of less than 5.5 dBi, and must not be co-located or operating in conjunction with any other antenna or transmitter. The antennas used for this transmitter must be installed to provide a separation distance of at least 0.5-cm from all persons. Approval is limited to OEM installation only. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The highest reported SAR for this device is 0.73 W/kg. This device supports 20 and 40 MHz modes. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Telefication B.V. Wilmersdorf 50 Apeldoorn, NL-7300 AC Netherlands |
Date of Grant: 03/06/2017 Application Dated: 02/20/2017 |
| BARTEC |
| Max-Eyth-Strasse 16 |
| Bad Mergentheim, 97980 Germany |
| Attention: Benedikt Eckert |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | TBUAGXISWL |
| Name of Grantee: | BARTEC |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | WIFI Modular |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC MO | 15E | 5180.0 - 5240.0 | 0.017 | ||
| 38 CC MO | 15E | 5745.0 - 5825.0 | 0.019 | ||
| 38 CC MO | 15E | 5260.0 - 5320.0 | 0.019 | ||
| 38 CC MO | 15E | 5500.0 - 5700.0 | 0.019 |
| Output power listed is conducted. Single Modular Approval for portable RF Exposure conditions. This device must be used with antennas identified in this filing, or those having a gain of less than 5.5 dBi, and must not be co-located or operating in conjunction with any other antenna or transmitter. The antennas used for this transmitter must be installed to provide a separation distance of at least 0.5-cm from all persons. Approval is limited to OEM installation only. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The highest reported SAR for this device is 0.35 W/kg. This device supports 20, 40, and 80 MHz modes. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application s/+6Fs/FmG7cUAJnFzPXow==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
BARTEC Max-Eyth-Strasse 16 Bad Mergentheim, 97980 Germany |
Date of Grant: 03/06/2017 Application Dated: 02/20/2017 |
| Attention: Benedikt Eckert |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | TBUAGXISWL |
| Name of Grantee: | BARTEC |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | WIFI Modular |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC MO | 15E | 5180.0 - 5240.0 | 0.017 | ||
| 38 CC MO | 15E | 5745.0 - 5825.0 | 0.019 | ||
| 38 CC MO | 15E | 5260.0 - 5320.0 | 0.019 | ||
| 38 CC MO | 15E | 5500.0 - 5700.0 | 0.019 |
| Output power listed is conducted. Single Modular Approval for portable RF Exposure conditions. This device must be used with antennas identified in this filing, or those having a gain of less than 5.5 dBi, and must not be co-located or operating in conjunction with any other antenna or transmitter. The antennas used for this transmitter must be installed to provide a separation distance of at least 0.5-cm from all persons. Approval is limited to OEM installation only. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The highest reported SAR for this device is 0.35 W/kg. This device supports 20, 40, and 80 MHz modes. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Telefication B.V. Wilmersdorf 50 Apeldoorn, NL-7300 AC Netherlands |
Date of Grant: 04/21/2017 Application Dated: 04/17/2017 |
| BARTEC |
| Max-Eyth-Strasse 16 |
| Bad Mergentheim, 97980 Germany |
| Attention: Benedikt Eckert |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | TBUAGXISWL |
| Name of Grantee: | BARTEC |
| Equipment Class: | Digital Transmission System |
| Notes: | WIFI Modular |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2402.0 - 2480.0 | 0.005 | ||
| CC MO | 15C | 2412.0 - 2462.0 | 0.031 |
| Class II change: This Class II Change incorporates this Module into a Tablet PC as described in this filing. Any configuration other than the one described will require a separate approval. End-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. The highest reported SAR values for body, and simulteneous transmission use conditions are: 0.71W/kg, and 0.98W/kg, respectively Output power listed is conducted. Single Modular Approval for portable RF Exposure conditions. This device must be used with antennas identified in this filing, or those having a gain of less than 5.5 dBi, and must not be co-located or operating in conjunction with any other antenna or transmitter. The antennas used for this transmitter must be installed to provide a separation distance of at least 0.5-cm from all persons. Approval is limited to OEM installation only. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The highest reported SAR for this device is 0.73 W/kg. This device supports 20 and 40 MHz modes. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application rtthB58hA5v9N8ulqm7alg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
BARTEC Max-Eyth-Strasse 16 Bad Mergentheim, 97980 Germany |
Date of Grant: 04/21/2017 Application Dated: 04/17/2017 |
| Attention: Benedikt Eckert |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | TBUAGXISWL |
| Name of Grantee: | BARTEC |
| Equipment Class: | Digital Transmission System |
| Notes: | WIFI Modular |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2402.0 - 2480.0 | 0.005 | ||
| CC MO | 15C | 2412.0 - 2462.0 | 0.031 |
| Class II change: This Class II Change incorporates this Module into a Tablet PC as described in this filing. Any configuration other than the one described will require a separate approval. End-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. The highest reported SAR values for body, and simulteneous transmission use conditions are: 0.71W/kg, and 0.98W/kg, respectively Output power listed is conducted. Single Modular Approval for portable RF Exposure conditions. This device must be used with antennas identified in this filing, or those having a gain of less than 5.5 dBi, and must not be co-located or operating in conjunction with any other antenna or transmitter. The antennas used for this transmitter must be installed to provide a separation distance of at least 0.5-cm from all persons. Approval is limited to OEM installation only. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The highest reported SAR for this device is 0.73 W/kg. This device supports 20 and 40 MHz modes. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Telefication B.V. Wilmersdorf 50 Apeldoorn, NL-7300 AC Netherlands |
Date of Grant: 04/21/2017 Application Dated: 04/17/2017 |
| BARTEC |
| Max-Eyth-Strasse 16 |
| Bad Mergentheim, 97980 Germany |
| Attention: Benedikt Eckert |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | TBUAGXISWL |
| Name of Grantee: | BARTEC |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | WIFI Modular |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.006 |
| Class II change: This Class II Change incorporates this Module into a Tablet PC as described in this filing. Any configuration other than the one described will require a separate approval. End-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. The highest reported SAR values for body, and simulteneous transmission use conditions are: < 0.10W/kg, and 0.98W/kg, respectively. Output power listed is conducted. Single Modular Approval for portable RF Exposure conditions. This device must be used with antennas identified in this filing, or those having a gain of less than 5.5 dBi, and must not be co-located or operating in conjunction with any other antenna or transmitter. The antennas used for this transmitter must be installed to provide a separation distance of at least 0.5-cm from all persons. Approval is limited to OEM installation only. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.. The highest reported SAR for this device is <0.10 W/kg. This device supports 20 and 40 MHz modes. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application +inPwwoyfCe80YBOvQidvQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
BARTEC Max-Eyth-Strasse 16 Bad Mergentheim, 97980 Germany |
Date of Grant: 04/21/2017 Application Dated: 04/17/2017 |
| Attention: Benedikt Eckert |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | TBUAGXISWL |
| Name of Grantee: | BARTEC |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | WIFI Modular |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.006 |
| Class II change: This Class II Change incorporates this Module into a Tablet PC as described in this filing. Any configuration other than the one described will require a separate approval. End-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. The highest reported SAR values for body, and simulteneous transmission use conditions are: < 0.10W/kg, and 0.98W/kg, respectively. Output power listed is conducted. Single Modular Approval for portable RF Exposure conditions. This device must be used with antennas identified in this filing, or those having a gain of less than 5.5 dBi, and must not be co-located or operating in conjunction with any other antenna or transmitter. The antennas used for this transmitter must be installed to provide a separation distance of at least 0.5-cm from all persons. Approval is limited to OEM installation only. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.. The highest reported SAR for this device is <0.10 W/kg. This device supports 20 and 40 MHz modes. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: |