FCC ID TC2-R1004

IP-STB

by Roku, Inc.

Grantee Code: TC2   Product Code: R1004
Latest application date: 2015-03-11

FCC ID Device Details

FCC IDTC2-R1004
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeTC2
Product CodeR1004
Applicant BusinessRoku, Inc. 🇺🇸
Related Domains roku.com quietek.com.cn
Equipment ClassIP-STB
Test FirmDEKRA Testing and Certification (Suzhou) Co., Ltd.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2412-2462 MHzClass II permissive change or modification of presently authorized equipment2015-03-11
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2015-03-11
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2015-01-27
2412-2462 MHzClass II permissive change or modification of presently authorized equipment2015-01-27
2412-2462 MHzOriginal Equipment2013-02-08
5180-5240 MHzOriginal Equipment2013-02-08

Exhibits

DocumentTypeAvailableFile
TempConfidential_(4200X) user manualUsers Manual2013-05-09PDF 1 MB
(4210X&4230X) Internal PhotographInternal Photos2015-06-09PDF 1.2 MB
1470218R-4200X-Internal PhotographInternal Photos2015-01-27PDF 585.4 KB
TempConfidential_(4200X) Internal PhotoInternal Photos2013-05-09PDF 454 KB
(4210X&4230X) External PhotographExternal Photos2015-06-09PDF 1.7 MB
1470218R-4200X-External PhotographExternal Photos2015-01-27PDF 789.2 KB
TempConfidential_(4200X) External photoExternal Photos2013-05-09PDF 269.2 KB
(4210X&4230X) Label&Label LocationID Label/Location Info2015-03-11PDF 221 KB
1470218R-4200X-Label&label locationID Label/Location Info2015-01-27PDF 305.7 KB
(4200X) Label&location_update20130131ID Label/Location Info2013-02-08PDF 305.7 KB
(4210X&4230X)Test Setup PhotographTest Setup Photos2015-06-09PDF 139.5 KB
1470218R-4200X-Test Setup PhotographTest Setup Photos2015-01-27PDF 361.3 KB
TempConfidential_(4200X) Test PhotoTest Setup Photos2013-05-09PDF 143 KB
1510320R-RF-15.247_Tx_-IP-STB-4210X-V1.0Test Report2015-03-11PDF 4.2 MB
1510320R-RF-15.407_Tx_-IP-STB-4210X-V1.0Test Report2015-03-11PDF 3.3 MB
1470218R-IP-STB-RF-FCC-15.247(Tx)-4200X-V1.1-2015-01-20Test Report2015-01-27PDF 4.2 MB
1470218R-IP-STB-RF-FCC-15.407(Tx)-4200X-V1.1-2015-01-20Test Report2015-01-27PDF 3.3 MB
129S019R-IP-STB-RF-FCC-15.247_Tx_Test Report2013-02-08PDF 5.2 MB
129S019R-IP-STB-RF-FCC-15.407_Tx_Test Report2013-02-08PDF 3.3 MB
(4200X) AttestationAttestation Statements2013-02-08PDF 138.8 KB
(4200X) P15B AttestationAttestation Statements2013-02-08PDF 183 KB
(4210X&4230X) -PCII Change LetterCover Letter(s)2015-03-11PDF 188 KB
(4210X&4230X) Cover Letter for FCC LOGOCover Letter(s)2015-03-11PDF 152 KB
(4210X&4230X) FCC Confidentiality long&short Term Letter-newCover Letter(s)2015-03-11PDF 264.4 KB
1470218R-4200X- Declaration of authorization-2015-01-23Cover Letter(s)2015-01-27PDF 25.9 KB
1470218R-4200X- FCC Confidentiality_long Term_ Letter-2015-01-20Cover Letter(s)2015-01-27PDF 33.9 KB
1470218R-4200X-PCII Change LetterCover Letter(s)2015-01-27PDF 180.5 KB
(4200X) Declaration of authorizationCover Letter(s)2013-02-08PDF 242.7 KB
(4200X) FCC Confidentiality(long&short Term) LetterCover Letter(s)2013-02-08PDF 276.9 KB
1510320R-RF-FCC-RF Exposure-4210X-V1.0RF Exposure Info2015-03-11PDF 57.9 KB
1470218R-RF-FCC-RF Exposure-4200X-V1.1-2015-01-20 Metadata onlyParts List/Tune Up Info2015-01-27PDF 72.2 KB
1470218R-RF-FCC-RF Exposure-4200X-V1.1-2015-01-20RF Exposure Info2015-01-27PDF 72.2 KB
129S019R-FCC-RF ExposureRF Exposure Info2013-02-08PDF 72.2 KB
Confidential_(4210X&4230X) Block Diagram Metadata onlyBlock DiagramPDF 97.9 KB
Confidential_(4210X&4230X) Layout Comparison Metadata onlyBlock DiagramPDF 119.8 KB
Confidential_1470218R-4200X-Block Diagram Metadata onlyBlock DiagramPDF 128.1 KB
Confidential_(4210X&4230X) Schematics Diagram Metadata onlySchematicsPDF 703.4 KB
Confidential_1470218R-4200X-Schematics Diagram Metadata onlySchematicsPDF 703.4 KB

Application Information

Application IDoSG4YxytHDKuaNa8h6vZyg==
Final Action Date2015-03-11
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0013581079
ModelR1004
Frequency Range2412-2462 MHz
Equipment ClassDTS - Digital Transmission System
Device DescriptionIP-STB
Responsible PartyRobert Curtis, Director SW Engineer, RCurtis@roku.com , 707-365-0353
AgentDream Dream Dream, QuieTek Technology (Suzhou) Co.,Ltd., dreamcao@quietek.com.cn , 0512-62515088
Technical ContactHarry Zhao, QuieTek Technology (Suzhou) Co.,Ltd., harryzhao@quietek.com.cn , 86-0512-6251-5088
Non-Technical ContactYuki Li, QuieTek Technology (Suzhou) Co.,Ltd., yukili@quietek.com.cn , 86-0512-6251-5088
Test FirmJerry Pan, DEKRA Testing and Certification (Suzhou) Co., Ltd., jerrypan@quietek.com.cn , 86-512-62515088
TCB Emailhotline@acbcert.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityYes
Short-Term Confidentiality Date06/09/2015
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsPower Output listed is conducted. Device is an 802.11n device in a 2x2 Spatial Multiplexing MIMO configuration as described in this filing. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has a 20 MHz and 40 MHz bandwidth mode.

Applications

Application IDDatePurpose
oSG4YxytHDKuaNa8h6vZyg==2015-03-11Class II permissive change or modification of presently authorized equipment
5OjCyDXNpHSZpaXeUWRL7g==2015-03-11Class II permissive change or modification of presently authorized equipment
2kUkJUl6VMeLc8wepPNQFQ==2015-01-27Class II permissive change or modification of presently authorized equipment
1E9lGs5KRd/S0+4+kJ4uuA==2015-01-27Class II permissive change or modification of presently authorized equipment
d/9v2MQs1ySkpnVSfsmTfw==2013-02-08Original Equipment
/B0FvlT5hAfhGzqi8xIPCg==2013-02-08Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2412-2462 MHz0.49315CCC, MO
5180-5240 MHz0.049000015ECC, MO
5180-5240 MHz0.049000015E39, CC, MO
5745-5825 MHz0.14615CCC, MO

Grants

TCB Grant - Application oSG4YxytHDKuaNa8h6vZyg==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
Date of Grant: 03/11/2015

Application Dated: 03/10/2015
Roku, Inc.
1155 Coleman Ave
San Jose, CA 95110
 
Attention: Robert Curtis , Director SW Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  TC2-R1004
Name of Grantee:  Roku, Inc.
Equipment Class: Digital Transmission System
Notes: IP-STB
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.493  
CC MO 15C 5745.0  -  5825.0 0.146  

Power Output listed is conducted. Device is an 802.11n device in a 2x2 Spatial Multiplexing MIMO configuration as described in this filing. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

This device has a 20 MHz and 40 MHz bandwidth mode.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application oSG4YxytHDKuaNa8h6vZyg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Roku, Inc.
1155 Coleman Ave
San Jose, CA 95110
United States
  Date of Grant: 03/11/2015

Application Dated: 03/10/2015
 
Attention: Robert Curtis , Director SW Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  TC2-R1004
Name of Grantee:  Roku, Inc.
Equipment Class: Digital Transmission System
Notes: IP-STB
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.493  
CC MO 15C 5745.0  -  5825.0 0.146  

Power Output listed is conducted. Device is an 802.11n device in a 2x2 Spatial Multiplexing MIMO configuration as described in this filing. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

This device has a 20 MHz and 40 MHz bandwidth mode.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application d/9v2MQs1ySkpnVSfsmTfw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
Date of Grant: 02/08/2013

Application Dated: 01/31/2013
Roku, Inc.
12980 Saratoga Avenue
Suite #D
Saratoga, CA 95070
 
Attention: Greg Garner , Director of Hardware Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  TC2-R1004
Name of Grantee:  Roku, Inc.
Equipment Class: Digital Transmission System
Notes: IP-STB
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.493  
CC MO 15C 5745.0  -  5825.0 0.146  

Power Output listed is conducted. Device is an 802.11n device in a 2x2 Spatial Multiplexing MIMO configuration as described in this filing. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

This device has a 20 MHz and 40 MHz bandwidth mode.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application d/9v2MQs1ySkpnVSfsmTfw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Roku, Inc.
12980 Saratoga Avenue Suite #D
Saratoga, CA 95070
United States
  Date of Grant: 02/08/2013

Application Dated: 01/31/2013
 
Attention: Greg Garner , Director of Hardware Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  TC2-R1004
Name of Grantee:  Roku, Inc.
Equipment Class: Digital Transmission System
Notes: IP-STB
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.493  
CC MO 15C 5745.0  -  5825.0 0.146  

Power Output listed is conducted. Device is an 802.11n device in a 2x2 Spatial Multiplexing MIMO configuration as described in this filing. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

This device has a 20 MHz and 40 MHz bandwidth mode.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application 5OjCyDXNpHSZpaXeUWRL7g==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
Date of Grant: 03/11/2015

Application Dated: 03/11/2015
Roku, Inc.
1155 Coleman Ave
San Jose, CA 95110
 
Attention: Robert Curtis , Director SW Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  TC2-R1004
Name of Grantee:  Roku, Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: IP-STB
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
39 CC MO 15E 5180.0  -  5240.0 0.049  

Power Output listed is conducted. Device is an 802.11n device in a 2x2 Spatial Multiplexing MIMO configuration as described in this filing. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

This device has a 20 MHz and 40 MHz bandwidth mode.


39: This sub-band complies with the new rules for U-NII devices adopted under Docket No. 13-49. This device may not be sold or marketed after June 1, 2016, unless all grant-listed U-NII sub-bands demonstrate compliance with Docket No. 13-49.
CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application 5OjCyDXNpHSZpaXeUWRL7g==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Roku, Inc.
1155 Coleman Ave
San Jose, CA 95110
United States
  Date of Grant: 03/11/2015

Application Dated: 03/11/2015
 
Attention: Robert Curtis , Director SW Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  TC2-R1004
Name of Grantee:  Roku, Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: IP-STB
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
39 CC MO 15E 5180.0  -  5240.0 0.049  

Power Output listed is conducted. Device is an 802.11n device in a 2x2 Spatial Multiplexing MIMO configuration as described in this filing. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

This device has a 20 MHz and 40 MHz bandwidth mode.


39: This sub-band complies with the new rules for U-NII devices adopted under Docket No. 13-49. This device may not be sold or marketed after June 1, 2016, unless all grant-listed U-NII sub-bands demonstrate compliance with Docket No. 13-49.
CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application 2kUkJUl6VMeLc8wepPNQFQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
Date of Grant: 01/27/2015

Application Dated: 01/20/2015
Roku, Inc.
1155 Coleman Ave
San Jose, CA 95110
 
Attention: Robert Curtis , Director SW Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  TC2-R1004
Name of Grantee:  Roku, Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: IP-STB
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.049  

Power Output listed is conducted. Device is an 802.11n device in a 2x2 Spatial Multiplexing MIMO configuration as described in this filing. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

This device has a 20 MHz and 40 MHz bandwidth mode.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application 2kUkJUl6VMeLc8wepPNQFQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Roku, Inc.
1155 Coleman Ave
San Jose, CA 95110
United States
  Date of Grant: 01/27/2015

Application Dated: 01/20/2015
 
Attention: Robert Curtis , Director SW Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  TC2-R1004
Name of Grantee:  Roku, Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: IP-STB
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.049  

Power Output listed is conducted. Device is an 802.11n device in a 2x2 Spatial Multiplexing MIMO configuration as described in this filing. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

This device has a 20 MHz and 40 MHz bandwidth mode.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application 1E9lGs5KRd/S0+4+kJ4uuA==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
Date of Grant: 01/27/2015

Application Dated: 01/20/2015
Roku, Inc.
1155 Coleman Ave
San Jose, CA 95110
 
Attention: Robert Curtis , Director SW Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  TC2-R1004
Name of Grantee:  Roku, Inc.
Equipment Class: Digital Transmission System
Notes: IP-STB
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.493  
CC MO 15C 5745.0  -  5825.0 0.146  

Power Output listed is conducted. Device is an 802.11n device in a 2x2 Spatial Multiplexing MIMO configuration as described in this filing. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

This device has a 20 MHz and 40 MHz bandwidth mode.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application 1E9lGs5KRd/S0+4+kJ4uuA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Roku, Inc.
1155 Coleman Ave
San Jose, CA 95110
United States
  Date of Grant: 01/27/2015

Application Dated: 01/20/2015
 
Attention: Robert Curtis , Director SW Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  TC2-R1004
Name of Grantee:  Roku, Inc.
Equipment Class: Digital Transmission System
Notes: IP-STB
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.493  
CC MO 15C 5745.0  -  5825.0 0.146  

Power Output listed is conducted. Device is an 802.11n device in a 2x2 Spatial Multiplexing MIMO configuration as described in this filing. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

This device has a 20 MHz and 40 MHz bandwidth mode.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application /B0FvlT5hAfhGzqi8xIPCg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
Date of Grant: 02/08/2013

Application Dated: 01/31/2013
Roku, Inc.
12980 Saratoga Avenue
Suite #D
Saratoga, CA 95070
 
Attention: Greg Garner , Director of Hardware Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  TC2-R1004
Name of Grantee:  Roku, Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: IP-STB
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.049  

Power Output listed is conducted. Device is an 802.11n device in a 2x2 Spatial Multiplexing MIMO configuration as described in this filing. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

This device has a 20 MHz and 40 MHz bandwidth mode.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application /B0FvlT5hAfhGzqi8xIPCg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Roku, Inc.
12980 Saratoga Avenue Suite #D
Saratoga, CA 95070
United States
  Date of Grant: 02/08/2013

Application Dated: 01/31/2013
 
Attention: Greg Garner , Director of Hardware Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  TC2-R1004
Name of Grantee:  Roku, Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: IP-STB
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.049  

Power Output listed is conducted. Device is an 802.11n device in a 2x2 Spatial Multiplexing MIMO configuration as described in this filing. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

This device has a 20 MHz and 40 MHz bandwidth mode.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

Mail To: