FCC ID TC2-N1003
WIFI Module
by Roku, Inc.
Grantee Code: TC2 Product Code: N1003
Latest application date: 2015-10-26
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2412-2462 MHz | Original Equipment | 2015-10-26 |
| 5180-5240 MHz | Original Equipment | 2015-10-26 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| User Manual | Users Manual | 2016-04-20 | PDF 202.6 KB |
| Internal Photos | Internal Photos | 2016-04-20 | PDF 252 KB |
| External Photos | External Photos | 2016-04-20 | PDF 402.4 KB |
| Label & Label Location | ID Label/Location Info | 2015-10-26 | PDF 22.6 KB |
| Label Info | ID Label/Location Info | 2015-10-26 | PDF 22.6 KB |
| Test Setup Photos | Test Setup Photos | 2016-04-20 | PDF 384.1 KB |
| Test Report | Test Report | 2015-10-26 | PDF 1.1 MB |
| Test Report NII | Test Report | 2015-10-26 | PDF 1.2 MB |
| Confidentiality Letter | Cover Letter(s) | 2015-10-26 | PDF 272.6 KB |
| Confidentiality Request Letter | Cover Letter(s) | 2015-10-26 | PDF 272.6 KB |
| Modular Approval Letter | Cover Letter(s) | 2015-10-26 | PDF 25.6 KB |
| POA | Cover Letter(s) | 2015-10-26 | PDF 178.4 KB |
| Human Exposure | RF Exposure Info | 2015-10-26 | PDF 183.5 KB |
| RF Exposure Info | RF Exposure Info | 2015-10-26 | PDF 183.5 KB |
| Block Diagram Metadata only | Block Diagram | PDF 45.8 KB | |
| Schematics Metadata only | Schematics | PDF 104.8 KB | |
| Operation Description Metadata only | Operational Description | PDF 81.1 KB | |
| Operational Description Metadata only | Operational Description | PDF 81.1 KB | |
| Operational Description Software Security Metadata only | Operational Description | PDF 31.1 KB | |
| Operational Description Software Security Requirements Metadata only | Operational Description | PDF 31.1 KB |
Application Information
| Application ID | wfmQZOV/nGweAN/SZbs51g== |
|---|---|
| Final Action Date | 2015-10-26 |
| Application Purpose | Original Equipment |
| Applicant FRN | 0013581079 |
| Model | N1003 |
| Frequency Range | 2412-2462 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | WIFI Module |
| Responsible Party | Robert Curtis, Director SW Engineer, RCurtis@roku.com  , 707-365-0353 |
| Test Firm | Alex Chen, Sporton International Inc., alex@sporton.com.tw  , 886-3-327-3456 |
| TCB Email | tei@timcoengr.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | Yes |
| Short-Term Confidentiality Date | 04/20/2016 |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Single Modular Approval. Power listed is maximum combined conducted output power. This device is restricted to fixed indoor and mobile use only. Device operates with specific antennas in MIMO configurations as described in this filing. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except as evaluated in this filing or in accordance with FCC multi-transmitter product procedures. The antenna(s) used for this transmitter must not exceed a maximum gain of 4.6 dBi and 4.5 dBi in 2.4 GHz and 5 GHz band, respectively. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has 20 MHz and 40 MHz bandwidth modes. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| wfmQZOV/nGweAN/SZbs51g== | 2015-10-26 | Original Equipment |
| fSYj8WbOaEeLXzt8Zc8hAw== | 2015-10-26 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application wfmQZOV/nGweAN/SZbs51g==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 10/26/2015 Application Dated: 10/23/2015 |
| Roku, Inc. |
| 1155 Coleman Ave |
| San Jose, CA 95110 |
| Attention: Robert Curtis , Director SW Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | TC2-N1003 |
| Name of Grantee: | Roku, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | WIFI Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.146 |
| Single Modular Approval. Power listed is maximum combined conducted output power. This device is restricted to fixed indoor and mobile use only. Device operates with specific antennas in MIMO configurations as described in this filing. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except as evaluated in this filing or in accordance with FCC multi-transmitter product procedures. The antenna(s) used for this transmitter must not exceed a maximum gain of 4.6 dBi and 4.5 dBi in 2.4 GHz and 5 GHz band, respectively. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has 20 MHz and 40 MHz bandwidth modes. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application wfmQZOV/nGweAN/SZbs51g==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Roku, Inc. 1155 Coleman Ave San Jose, CA 95110 United States |
Date of Grant: 10/26/2015 Application Dated: 10/23/2015 |
| Attention: Robert Curtis , Director SW Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | TC2-N1003 |
| Name of Grantee: | Roku, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | WIFI Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.146 |
| Single Modular Approval. Power listed is maximum combined conducted output power. This device is restricted to fixed indoor and mobile use only. Device operates with specific antennas in MIMO configurations as described in this filing. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except as evaluated in this filing or in accordance with FCC multi-transmitter product procedures. The antenna(s) used for this transmitter must not exceed a maximum gain of 4.6 dBi and 4.5 dBi in 2.4 GHz and 5 GHz band, respectively. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has 20 MHz and 40 MHz bandwidth modes. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 10/26/2015 Application Dated: 10/23/2015 |
| Roku, Inc. |
| 1155 Coleman Ave |
| San Jose, CA 95110 |
| Attention: Robert Curtis , Director SW Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | TC2-N1003 |
| Name of Grantee: | Roku, Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | WIFI Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC MO | 15E | 5180.0 - 5240.0 | 0.132 | ||
| 38 CC MO | 15E | 5745.0 - 5825.0 | 0.109 |
| Single Modular Approval. Power listed is maximum combined conducted output power. This device is restricted to fixed indoor and mobile use only. Device operates with specific antennas in MIMO configurations as described in this filing. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except as evaluated in this filing or in accordance with FCC multi-transmitter product procedures. The antenna(s) used for this transmitter must not exceed a maximum gain of 4.6 dBi and 4.5 dBi in 2.4 GHz and 5 GHz band, respectively. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has 20 MHz, 40 MHz, and 80 MHz bandwidth modes. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application fSYj8WbOaEeLXzt8Zc8hAw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Roku, Inc. 1155 Coleman Ave San Jose, CA 95110 United States |
Date of Grant: 10/26/2015 Application Dated: 10/23/2015 |
| Attention: Robert Curtis , Director SW Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | TC2-N1003 |
| Name of Grantee: | Roku, Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | WIFI Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC MO | 15E | 5180.0 - 5240.0 | 0.132 | ||
| 38 CC MO | 15E | 5745.0 - 5825.0 | 0.109 |
| Single Modular Approval. Power listed is maximum combined conducted output power. This device is restricted to fixed indoor and mobile use only. Device operates with specific antennas in MIMO configurations as described in this filing. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except as evaluated in this filing or in accordance with FCC multi-transmitter product procedures. The antenna(s) used for this transmitter must not exceed a maximum gain of 4.6 dBi and 4.5 dBi in 2.4 GHz and 5 GHz band, respectively. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has 20 MHz, 40 MHz, and 80 MHz bandwidth modes. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: |