FCC ID TC2N1101
802.11a/b/g/n WLAN Module
by Roku, Inc.
Grantee Code: TC2 Product Code: N1101
Latest application date: 2009-11-19
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2412-2462 MHz | Original Equipment | 2009-11-19 |
| 5180-5240 MHz | Original Equipment | 2009-11-19 |
Exhibits
Application Information
| Application ID | yrfUqvaiMb6MqL7yGzlxoQ== |
|---|---|
| Final Action Date | 2009-11-19 |
| Application Purpose | Original Equipment |
| Applicant FRN | 0013581079 |
| Model | N1101 |
| Frequency Range | 2412-2462 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | 802.11a/b/g/n WLAN Module |
| Responsible Party | Greg Garner, Director of Hardware Engineering, greg@roku.com |
| Technical Contact | Dream Cao, QuieTek, dreamcao@quietek.com.cn |
| Test Firm | Dream Cao, QuieTek Corporation, dreamcao@quietek.com.cn |
| TCB Email | hotline@atcb.com |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Power Output listed is maximum aggregate Conducted power. Modular approval. This module is approved for use in RF category Mobile configurations. This module must be installed by the OEM or OEM integrator. Instructions for installation of this module must not be given to the end user. Only those antennas tested with the device or similar type antennas with same or lesser gain may be used with this transmitter. The antenna used for this transmitter must be installed to provide a separation distance of 20cm from all persons and musty not be co-located with any other antenna or transmitter. End users must be provided with operating and installation instructions to ensure RF exposure compliance. Device is a client-only device operating in a 2x2 MIMO configuration, enabled for either 2.4 or 5GHz band operations as described in this filing. Both transmitters may operate simultaneously with respect to 1.1307 and 2.1091. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| yrfUqvaiMb6MqL7yGzlxoQ== | 2009-11-19 | Original Equipment |
| HPUXcEjIfjzaaeMEu8CzzA== | 2009-11-19 | Original Equipment |
Equipment Authorization
| Frequency | Output | Rules | Grant Notes |
|---|---|---|---|
| 2412-2462 MHz | 0.084 | 15C | CC, MO |
| 2422-2452 MHz | 0.091 | 15C | CC, MO |
| 5180-5240 MHz | 0.047 | 15E | CC, MO |
| 5190-5230 MHz | 0.042 | 15E | CC, MO |
| 5260-5320 MHz | 0.15 | 15E | CC, MO, ND |
| 5270-5310 MHz | 0.123 | 15E | CC, MO, ND |
| 5500-5700 MHz | 0.149 | 15E | CC, MO, ND |
| 5510-5670 MHz | 0.149 | 15E | CC, MO, ND |
| 5745-5825 MHz | 0.167 | 15C | CC, MO |
| 5755-5795 MHz | 0.128 | 15C | CC, MO |
Grants
TCB Grant - Application yrfUqvaiMb6MqL7yGzlxoQ==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 11/19/2009 Application Dated: 11/19/2009 |
| Roku, Inc. |
| 12980 Saratoga Avenue |
| Suite #D |
| Saratoga, CA 95070 |
| Attention: Greg Garner , Director of Hardware Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | TC2N1101 |
| Name of Grantee: | Roku, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11a/b/g/n WLAN Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.084 | ||
| CC MO | 15C | 2422.0 - 2452.0 | 0.091 | ||
| CC MO | 15C | 5745.0 - 5825.0 | 0.167 | ||
| CC MO | 15C | 5755.0 - 5795.0 | 0.128 |
| Power Output listed is maximum aggregate Conducted power. Modular approval. This module is approved for use in RF category Mobile configurations. This module must be installed by the OEM or OEM integrator. Instructions for installation of this module must not be given to the end user. Only those antennas tested with the device or similar type antennas with same or lesser gain may be used with this transmitter. The antenna used for this transmitter must be installed to provide a separation distance of 20cm from all persons and musty not be co-located with any other antenna or transmitter. End users must be provided with operating and installation instructions to ensure RF exposure compliance. Device is a client-only device operating in a 2x2 MIMO configuration, enabled for either 2.4 or 5GHz band operations as described in this filing. Both transmitters may operate simultaneously with respect to 1.1307 and 2.1091. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application yrfUqvaiMb6MqL7yGzlxoQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Roku, Inc. 12980 Saratoga Avenue Suite #D Saratoga, CA 95070 United States |
Date of Grant: 11/19/2009 Application Dated: 11/19/2009 |
| Attention: Greg Garner , Director of Hardware Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | TC2N1101 |
| Name of Grantee: | Roku, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11a/b/g/n WLAN Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.084 | ||
| CC MO | 15C | 2422.0 - 2452.0 | 0.091 | ||
| CC MO | 15C | 5745.0 - 5825.0 | 0.167 | ||
| CC MO | 15C | 5755.0 - 5795.0 | 0.128 |
| Power Output listed is maximum aggregate Conducted power. Modular approval. This module is approved for use in RF category Mobile configurations. This module must be installed by the OEM or OEM integrator. Instructions for installation of this module must not be given to the end user. Only those antennas tested with the device or similar type antennas with same or lesser gain may be used with this transmitter. The antenna used for this transmitter must be installed to provide a separation distance of 20cm from all persons and musty not be co-located with any other antenna or transmitter. End users must be provided with operating and installation instructions to ensure RF exposure compliance. Device is a client-only device operating in a 2x2 MIMO configuration, enabled for either 2.4 or 5GHz band operations as described in this filing. Both transmitters may operate simultaneously with respect to 1.1307 and 2.1091. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 11/19/2009 Application Dated: 11/19/2009 |
| Roku, Inc. |
| 12980 Saratoga Avenue |
| Suite #D |
| Saratoga, CA 95070 |
| Attention: Greg Garner , Director of Hardware Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | TC2N1101 |
| Name of Grantee: | Roku, Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | 802.11 a/b/g/n WLAN Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.047 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.15 | ||
| CC MO ND | 15E | 5500.0 - 5700.0 | 0.149 | ||
| CC MO | 15E | 5190.0 - 5230.0 | 0.042 | ||
| CC MO ND | 15E | 5270.0 - 5310.0 | 0.123 | ||
| CC MO ND | 15E | 5510.0 - 5670.0 | 0.149 |
| Power Output listed is maximum aggregate Conducted power. Modular approval. This module is approved for use in RF category Mobile configurations. This module must be installed by the OEM or OEM integrator. Instructions for installation of this module must not be given to the end user. Only those antennas tested with the device or similar type antennas with same or lesser gain may be used with this transmitter. The antenna used for this transmitter must be installed to provide a separation distance of 20cm from all persons and musty not be co-located with any other antenna or transmitter. This device is restricted to indoor only operations within the 5150-5250 MHz band. End users must be provided with operating and installation instructions to ensure RF exposure compliance. Device is a client-only device operating in a 2x2 MIMO configuration, enabled for either 2.4 or 5GHz band operations as described in this filing. Both transmitters may operate simultaneously with respect to 1.1307 and 2.1091. This device complies with the Dynamic Frequency Selection (DFS) requirements of FCC 06-96 as a Client-only without Radar Detection |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application HPUXcEjIfjzaaeMEu8CzzA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Roku, Inc. 12980 Saratoga Avenue Suite #D Saratoga, CA 95070 United States |
Date of Grant: 11/19/2009 Application Dated: 11/19/2009 |
| Attention: Greg Garner , Director of Hardware Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | TC2N1101 |
| Name of Grantee: | Roku, Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | 802.11 a/b/g/n WLAN Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.047 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.15 | ||
| CC MO ND | 15E | 5500.0 - 5700.0 | 0.149 | ||
| CC MO | 15E | 5190.0 - 5230.0 | 0.042 | ||
| CC MO ND | 15E | 5270.0 - 5310.0 | 0.123 | ||
| CC MO ND | 15E | 5510.0 - 5670.0 | 0.149 |
| Power Output listed is maximum aggregate Conducted power. Modular approval. This module is approved for use in RF category Mobile configurations. This module must be installed by the OEM or OEM integrator. Instructions for installation of this module must not be given to the end user. Only those antennas tested with the device or similar type antennas with same or lesser gain may be used with this transmitter. The antenna used for this transmitter must be installed to provide a separation distance of 20cm from all persons and musty not be co-located with any other antenna or transmitter. This device is restricted to indoor only operations within the 5150-5250 MHz band. End users must be provided with operating and installation instructions to ensure RF exposure compliance. Device is a client-only device operating in a 2x2 MIMO configuration, enabled for either 2.4 or 5GHz band operations as described in this filing. Both transmitters may operate simultaneously with respect to 1.1307 and 2.1091. This device complies with the Dynamic Frequency Selection (DFS) requirements of FCC 06-96 as a Client-only without Radar Detection |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: |