FCC ID TE7AP200

AC750 Wireless Gigabit Access Point

by TP-Link Technologies Co., Ltd.

Grantee Code: TE7   Product Code: AP200
Latest application date: 2016-11-01

FCC ID Device Details

FCC IDTE7AP200
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeTE7
Product CodeAP200
Applicant BusinessTP-Link Technologies Co., Ltd. 🇨🇳
Related Domains tp-link.com.cn
Equipment ClassAC750 Wireless Gigabit Access Point
Test FirmSPORTON International Inc.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2412-2462 MHzOriginal Equipment2016-11-01
5180-5240 MHzOriginal Equipment2016-11-01

Exhibits

DocumentTypeAvailableFile
TE7AP200_UG 0922Users Manual2016-11-01PDF 3.3 MB
TE7AP200_Internal PhotoInternal Photos2016-11-01PDF 1.3 MB
TE7AP200_External PhotoExternal Photos2016-11-01PDF 563.5 KB
TE7AP200_Label 0823ID Label/Location Info2016-11-01PDF 1.4 MB
TE7AP200_2.4G Test PhotoTest Setup Photos2016-11-01PDF 2 MB
TE7AP200_5G Test PhotoTest Setup Photos2016-11-01PDF 2 MB
TE7AP200_2.4G Test Report 1028Test Report2016-11-01PDF 3.8 MB
TE7AP200_Band1&4 Test report 0929Test Report2016-11-01PDF 3.2 MB
TE7AP200_Co-locationTest Report2016-11-01PDF 1.5 MB
TE7AP200_DoC Attestation Letter 0902Cover Letter(s)2016-11-01PDF 66.2 KB
TE7AP200_Confidentiality Request LetterCover Letter(s)2016-11-01PDF 219.6 KB
TE7AP200_POACover Letter(s)2016-11-01PDF 48.9 KB
TE7AP200_MPE 0922RF Exposure Info2016-11-01PDF 276.6 KB

Application Information

Application IDwzAB6S61kQsckTdlTjd21g==
Final Action Date2016-11-01
Application PurposeOriginal Equipment
Applicant FRN0013661145
ModelAP200
Frequency Range2412-2462 MHz
Equipment ClassDTS - Digital Transmission System
Device DescriptionAC750 Wireless Gigabit Access Point
Responsible PartyYongquan Wang, Product Dept. Manager, wangyongquan@tp-link.com.cn , 75526508263
Technical ContactJill Chen, SPORTON International Inc., JillChen@sporton.com.tw
Test FirmAlex Chen, SPORTON International Inc., alex@sporton.com.tw , 886-3-327-3456
TCB Emailhotline@acbcert.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsPower output is conducted. Device is an 802.11n device in a 2x2 Spatial Multiplexing MIMO configuration as described in this filing. The device has been certified for mobile use and any co- location must be done through the use of FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has a 20 MHz and 40 MHz bandwidth mode and it contains 5G UNII WLAN transmitter.

Applications

Application IDDatePurpose
wzAB6S61kQsckTdlTjd21g==2016-11-01Original Equipment
Bi5nanLceqmQgog54+4How==2016-11-01Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2412-2462 MHz0.826000015CCC, MO
5180-5240 MHz0.20315E38, CC
5745-5825 MHz0.1715E38, CC

Grants

TCB Grant - Application wzAB6S61kQsckTdlTjd21g==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
Date of Grant: 11/01/2016

Application Dated: 10/28/2016
TP-Link Technologies Co., Ltd.
Building 24 (floors 1,3,4,5) and 28 (floors1-4),
Central Science and Technology Park,Nanshan
Shenzhen, 518057
China
 
Attention: Yongquan Wang , Product Dept. Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  TE7AP200
Name of Grantee:  TP-Link Technologies Co., Ltd.
Equipment Class: Digital Transmission System
Notes: AC750 Wireless Gigabit Access Point
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.826  

Power output is conducted. Device is an 802.11n device in a 2x2 Spatial Multiplexing MIMO configuration as described in this filing. The device has been certified for mobile use and any co- location must be done through the use of FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

This device has a 20 MHz and 40 MHz bandwidth mode and it contains 5G UNII WLAN transmitter.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application wzAB6S61kQsckTdlTjd21g==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

TP-Link Technologies Co., Ltd.
Building 24 (floors 1,3,4,5) and 28 (floors1-4), Central Science and Technology Park,Nanshan
Shenzhen, 518057
China
  Date of Grant: 11/01/2016

Application Dated: 10/28/2016
 
Attention: Yongquan Wang , Product Dept. Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  TE7AP200
Name of Grantee:  TP-Link Technologies Co., Ltd.
Equipment Class: Digital Transmission System
Notes: AC750 Wireless Gigabit Access Point
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.826  

Power output is conducted. Device is an 802.11n device in a 2x2 Spatial Multiplexing MIMO configuration as described in this filing. The device has been certified for mobile use and any co- location must be done through the use of FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

This device has a 20 MHz and 40 MHz bandwidth mode and it contains 5G UNII WLAN transmitter.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application Bi5nanLceqmQgog54+4How==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
Date of Grant: 11/01/2016

Application Dated: 10/28/2016
TP-Link Technologies Co., Ltd.
Building 24 (floors 1,3,4,5) and 28 (floors1-4),
Central Science and Technology Park,Nanshan
Shenzhen, 518057
China
 
Attention: Yongquan Wang , Product Dept. Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  TE7AP200
Name of Grantee:  TP-Link Technologies Co., Ltd.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: AC750 Wireless Gigabit Access Point
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC 15E 5180.0  -  5240.0 0.203  
38 CC 15E 5745.0  -  5825.0 0.17  

Power output is conducted. The device has been certified for mobile use and any co-location must be done through the use of FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

This device supports IEEE 802.11a/n/ac with 20 MHz, 40 MHz and 80 MHz bandwidth mode and it contains 2.4G WLAN transmitter.


38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application Bi5nanLceqmQgog54+4How==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

TP-Link Technologies Co., Ltd.
Building 24 (floors 1,3,4,5) and 28 (floors1-4), Central Science and Technology Park,Nanshan
Shenzhen, 518057
China
  Date of Grant: 11/01/2016

Application Dated: 10/28/2016
 
Attention: Yongquan Wang , Product Dept. Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  TE7AP200
Name of Grantee:  TP-Link Technologies Co., Ltd.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: AC750 Wireless Gigabit Access Point
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC 15E 5180.0  -  5240.0 0.203  
38 CC 15E 5745.0  -  5825.0 0.17  

Power output is conducted. The device has been certified for mobile use and any co-location must be done through the use of FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

This device supports IEEE 802.11a/n/ac with 20 MHz, 40 MHz and 80 MHz bandwidth mode and it contains 2.4G WLAN transmitter.


38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.

Mail To: