FCC ID TE7CPE610

5GHz 300Mbps 23dBi Outdoor CPE

by TP-Link Technologies Co., Ltd.

Grantee Code: TE7   Product Code: CPE610
Latest application date: 2017-09-08

FCC ID Device Details

FCC IDTE7CPE610
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeTE7
Product CodeCPE610
Applicant BusinessTP-Link Technologies Co., Ltd. 🇨🇳
Related Domains tp-link.com
Equipment Class5GHz 300Mbps 23dBi Outdoor CPE
Test FirmSPORTON International Inc.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
5180-5240 MHzOriginal Equipment2017-09-08

Exhibits

DocumentTypeAvailableFile
User ManualUsers Manual2017-09-08PDF 2.6 MB
Internal PhotosInternal Photos2017-09-08PDF 820.9 KB
External PhotosExternal Photos2017-09-08PDF 463.5 KB
Label and LocationID Label/Location Info2017-09-08PDF 101.4 KB
Test Setup Photo RFTest Setup Photos2017-09-08PDF 241.7 KB
MPE Test ReportRF Exposure Info2017-09-08PDF 232.5 KB
RF Test Report NIITest Report2017-09-08PDF 3.2 MB
Confidential LetterCover Letter(s)2017-09-08PDF 160.3 KB
POACover Letter(s)2017-09-08PDF 68.4 KB
Block Diagram Metadata onlyBlock DiagramPDF 34.5 KB
Schematics Metadata onlySchematicsPDF 233.6 KB
Operational Description Metadata onlyOperational DescriptionPDF 51.3 KB
Operational Description Revised Metadata onlyOperational DescriptionPDF 51.3 KB
Operational Description Software Security Metadata onlySDR Software/Security InfPDF 44.1 KB

Application Information

Application ID13xr2xFtsboGhvilEhwpqQ==
Final Action Date2017-09-08
Application PurposeOriginal Equipment
Applicant FRN0013661145
ModelCPE610
Frequency Range5180-5240 MHz
Equipment ClassNII - Unlicensed National Information Infrastructure TX
Device Description5GHz 300Mbps 23dBi Outdoor CPE
Responsible PartyJing Huang, Regulatory Compliance Manager, certification@tp-link.com , 75521534921
Test FirmSharon Jiang, SPORTON International Inc., sharonjiang@sporton.com.tw , 886-3-656-9065
TCB Emailtei@timcoengr.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceNo
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsPower listed is maximum conducted output power. Device is for P2P applications only. Device operates with specific antennas in MIMO configurations as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 10, 20, and 40 MHz bandwidth modes.

Applications

Application IDDatePurpose
13xr2xFtsboGhvilEhwpqQ==2017-09-08Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
5180-5240 MHz0.05615E38, MO
5745-5825 MHz0.04115E38, MO

Grants

TCB Grant - Application 13xr2xFtsboGhvilEhwpqQ==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669
Date of Grant: 09/08/2017

Application Dated: 09/07/2017
TP-Link Technologies Co., Ltd.
Building 24 (floors 1,3,4,5) and 28 (floors1-4),
Central Science and Technology Park,Nanshan
Shenzhen, 518057
China
 
Attention: Jing Huang , Regulatory Compliance Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  TE7CPE610
Name of Grantee:  TP-Link Technologies Co., Ltd.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: 5GHz 300Mbps 23dBi Outdoor CPE
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 MO 15E 5180.0  -  5240.0 0.056  
38 MO 15E 5745.0  -  5825.0 0.041  

Power listed is maximum conducted output power. Device is for P2P applications only. Device operates with specific antennas in MIMO configurations as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 10, 20, and 40 MHz bandwidth modes.

38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application 13xr2xFtsboGhvilEhwpqQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

TP-Link Technologies Co., Ltd.
Building 24 (floors 1,3,4,5) and 28 (floors1-4), Central Science and Technology Park,Nanshan
Shenzhen, 518057
China
  Date of Grant: 09/08/2017

Application Dated: 09/07/2017
 
Attention: Jing Huang , Regulatory Compliance Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  TE7CPE610
Name of Grantee:  TP-Link Technologies Co., Ltd.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: 5GHz 300Mbps 23dBi Outdoor CPE
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 MO 15E 5180.0  -  5240.0 0.056  
38 MO 15E 5745.0  -  5825.0 0.041  

Power listed is maximum conducted output power. Device is for P2P applications only. Device operates with specific antennas in MIMO configurations as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 10, 20, and 40 MHz bandwidth modes.


38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

Mail To: