FCC ID TE7T2UPLUS
AC600 High Gain Wireless Dual Band USB Adapter
by TP-Link Technologies Co., Ltd.
Grantee Code: TE7 Product Code: T2UPLUS
Latest application date: 2019-03-28
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2412-2462 MHz | Original Equipment | 2019-03-28 |
| 5180-5240 MHz | Original Equipment | 2019-03-28 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| 14.Users Manual | Users Manual | 2019-03-28 | PDF 1.2 MB |
| 18.Internal Photos | Internal Photos | 2019-03-28 | PDF 1.3 MB |
| 19.External Photos | External Photos | 2019-03-28 | PDF 514.6 KB |
| 13.Label and location | ID Label/Location Info | 2019-03-28 | PDF 583.1 KB |
| 11. FCC Test Setup Photos | Test Setup Photos | 2019-03-28 | PDF 1.2 MB |
| 12. FCC SAR Test Report | RF Exposure Info | 2019-03-28 | PDF 836 KB |
| 12. FCC SAR Test Report Appendix A. SAR Plots of System Verification | RF Exposure Info | 2019-03-28 | PDF 230.5 KB |
| 12. FCC SAR Test Report Appendix B. SAR Plots of SAR Measurement | RF Exposure Info | 2019-03-28 | PDF 192.1 KB |
| 12. FCC SAR Test Report Appendix C. Calibration Certificate | RF Exposure Info | 2019-03-28 | PDF 2 MB |
| 12. FCC SAR Test Report Appendix D. Photographs of the Test Set-Up | RF Exposure Info | 2019-03-28 | PDF 1.1 MB |
| 12. FCC Test Report 2.4G Part 1 | Test Report | 2019-03-28 | PDF 4.9 MB |
| 12. FCC Test Report 2.4G Part 2 | Test Report | 2019-03-28 | PDF 4.9 MB |
| 12. FCC Test Report 2.4G Part 3 | Test Report | 2019-03-28 | PDF 370.6 KB |
| 12. FCC Test Report 5G Part 1 | Test Report | 2019-03-28 | PDF 4.9 MB |
| 12. FCC Test Report 5G Part 2 | Test Report | 2019-03-28 | PDF 4.8 MB |
| 12. FCC Test Report 5G Part 3 | Test Report | 2019-03-28 | PDF 3.3 MB |
| 12. FCC Test Report DFS | Test Report | 2019-03-28 | PDF 1.7 MB |
| 2. FCC Agency Authorization Letter | Cover Letter(s) | 2019-03-28 | PDF 18.9 KB |
| 21.Wi-Fi Channel 12 and 13 Declaration Letter | Cover Letter(s) | 2019-03-28 | PDF 17.8 KB |
| 6. FCC Confidentiality Request Letter | Cover Letter(s) | 2019-03-28 | PDF 28.5 KB |
| Confidential_16.Block Diagram Metadata only | Block Diagram | PDF 281.9 KB | |
| Confidential_15.Schematics Metadata only | Schematics | PDF 269.8 KB | |
| 17.Operation Description rev2 Metadata only | Operational Description | PDF 222.3 KB | |
| 20. Operation Description for software security rev 2 Metadata only | Operational Description | PDF 281.6 KB | |
| 22.FCC Tune up Procedure Metadata only | Operational Description | PDF 69.9 KB | |
| 24.OET Inquiry System Inquiry Tracking Number 680254 Metadata only | Operational Description | PDF 3.7 MB | |
| 22.FCC Tune up Procedure Metadata only | Parts List/Tune Up Info | PDF 69.9 KB |
Application Information
| Application ID | qgcRRGR3mDR3uyKHGDqUlg== |
|---|---|
| Final Action Date | 2019-03-28 |
| Application Purpose | Original Equipment |
| Applicant FRN | 0013661145 |
| Model | T2UPLUS |
| Frequency Range | 2412-2462 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | AC600 High Gain Wireless Dual Band USB Adapter |
| Responsible Party | Jing Huang, Regulatory Compliance Manager, certification@tp-link.com  , 75521534921 |
| Test Firm | Sophia Huang, BTL Inc., Sophia.huang@newbtl.com  , +86-769-83183000 |
| TCB Email | hotline@acbcert.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | Yes |
| Grant Comments | Power Output is conducted. The SAR data in this filing is applicable to demonstrate compliance for the USB Dongle only as shown in this filing. End-users must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. The antenna used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. The highest reported SAR value is: Body: 1.18 W/kg. This device has a 20 MHz and 40 MHz bandwidth mode (IEEE 802.11b/g/n, plus VHT20/VHT40 with up to 256QAM Modulation supported) and it contains 5GHz UNII transmitter. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| qgcRRGR3mDR3uyKHGDqUlg== | 2019-03-28 | Original Equipment |
| Uwb1xKWSf1nyXTwhaO2qcA== | 2019-03-28 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application Uwb1xKWSf1nyXTwhaO2qcA==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 03/28/2019 Application Dated: 03/26/2019 |
| TP-Link Technologies Co., Ltd. |
| Building 24 (floors 1,3,4,5) and 28 (floors1-4), |
| Central Science and Technology Park,Nanshan |
| Shenzhen, 518057 China |
| Attention: Jing Huang , Regulatory Compliance Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | TE7T2UPLUS |
| Name of Grantee: | TP-Link Technologies Co., Ltd. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | AC600 High Gain Wireless Dual Band USB Adapter |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5240.0 | 0.0472 | ||
| CC ND | 15E | 5260.0 - 5320.0 | 0.0488 | ||
| CC ND | 15E | 5500.0 - 5700.0 | 0.0558 | ||
| CC | 15E | 5745.0 - 5825.0 | 0.0614 |
| Power Output is conducted. The SAR data in this filing is applicable to demonstrate compliance for the USB Dongle only as shown in this filing. End-users must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. The antenna used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. The highest reported SAR value is: Body: 1.18 W/kg. This device has a 20 MHz, 40 MHz and 80 MHz bandwidth mode (IEEE 802.11a/n/ac supported) and it contains 2.4GHz WLAN transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application Uwb1xKWSf1nyXTwhaO2qcA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
TP-Link Technologies Co., Ltd. Building 24 (floors 1,3,4,5) and 28 (floors1-4), Central Science and Technology Park,Nanshan Shenzhen, 518057 China |
Date of Grant: 03/28/2019 Application Dated: 03/26/2019 |
| Attention: Jing Huang , Regulatory Compliance Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | TE7T2UPLUS |
| Name of Grantee: | TP-Link Technologies Co., Ltd. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | AC600 High Gain Wireless Dual Band USB Adapter |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5240.0 | 0.0472 | ||
| CC ND | 15E | 5260.0 - 5320.0 | 0.0488 | ||
| CC ND | 15E | 5500.0 - 5700.0 | 0.0558 | ||
| CC | 15E | 5745.0 - 5825.0 | 0.0614 |
| Power Output is conducted. The SAR data in this filing is applicable to demonstrate compliance for the USB Dongle only as shown in this filing. End-users must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. The antenna used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. The highest reported SAR value is: Body: 1.18 W/kg. This device has a 20 MHz, 40 MHz and 80 MHz bandwidth mode (IEEE 802.11a/n/ac supported) and it contains 2.4GHz WLAN transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 03/28/2019 Application Dated: 03/25/2019 |
| TP-Link Technologies Co., Ltd. |
| Building 24 (floors 1,3,4,5) and 28 (floors1-4), |
| Central Science and Technology Park,Nanshan |
| Shenzhen, 518057 China |
| Attention: Jing Huang , Regulatory Compliance Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | TE7T2UPLUS |
| Name of Grantee: | TP-Link Technologies Co., Ltd. |
| Equipment Class: | Digital Transmission System |
| Notes: | AC600 High Gain Wireless Dual Band USB Adapter |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.0615 |
| Power Output is conducted. The SAR data in this filing is applicable to demonstrate compliance for the USB Dongle only as shown in this filing. End-users must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. The antenna used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. The highest reported SAR value is: Body: 1.18 W/kg. This device has a 20 MHz and 40 MHz bandwidth mode (IEEE 802.11b/g/n, plus VHT20/VHT40 with up to 256QAM Modulation supported) and it contains 5GHz UNII transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application qgcRRGR3mDR3uyKHGDqUlg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
TP-Link Technologies Co., Ltd. Building 24 (floors 1,3,4,5) and 28 (floors1-4), Central Science and Technology Park,Nanshan Shenzhen, 518057 China |
Date of Grant: 03/28/2019 Application Dated: 03/25/2019 |
| Attention: Jing Huang , Regulatory Compliance Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | TE7T2UPLUS |
| Name of Grantee: | TP-Link Technologies Co., Ltd. |
| Equipment Class: | Digital Transmission System |
| Notes: | AC600 High Gain Wireless Dual Band USB Adapter |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.0615 |
| Power Output is conducted. The SAR data in this filing is applicable to demonstrate compliance for the USB Dongle only as shown in this filing. End-users must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. The antenna used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. The highest reported SAR value is: Body: 1.18 W/kg. This device has a 20 MHz and 40 MHz bandwidth mode (IEEE 802.11b/g/n, plus VHT20/VHT40 with up to 256QAM Modulation supported) and it contains 5GHz UNII transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: |