FCC ID TEB-HUNTNRD220696
RF modem module
by Landis+Gyr Technologies, LLC
Grantee Code: TEB Product Code: HUNTNRD220696
Latest application date: 2007-06-26
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 910.5-927.5 MHz | Change in identification of presently authorized equipment. Original FCC ID: SQB-NIVISNRD20101 Grant Date: 11/07/2006 | 2007-06-26 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Photos of board | External Photos | 2007-06-26 | PDF 1.2 MB |
| FCC ID Label | ID Label/Location Info | 2007-06-26 | PDF 269.4 KB |
| Cover letter | Cover Letter(s) | 2007-06-26 | PDF 414.9 KB |
Application Information
| Application ID | /COY2UPcpbMNoc5gu9YaOw== |
|---|---|
| Final Action Date | 2007-06-26 |
| Application Purpose | Change in identification of presently authorized equipment. Original FCC ID: SQB-NIVISNRD20101 Grant Date: 11/07/2006 |
| Applicant FRN | 0013591094 |
| Model | -HUNTNRD220696 |
| Frequency Range | 910.5-927.5 MHz |
| Equipment Class | DSS - Part 15 Spread Spectrum Transmitter |
| Device Description | RF modem module |
| Responsible Party | Carl W Jacobi, Hardware Test Engineer, carl.jacobi@landisgyr.com  , 218-562-5125 |
| Technical Contact | Matt Donald Karlgaard, Hunt Technologies, matt.karlgaard@hunttechnologies.com  , 218-562-5198 |
| Test Firm | George Yang, US Tech, gyang@ustech-lab.com  , 7707400717 |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | No |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Modular Approval. Approved for use in mobile / fixed host products only. Power Output listed is conducted. This grant is valid only when the device is supplied to OEM integrators and the integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. This device is approved for use only with the type of antenna, at equal or lower gain, as described in this filing and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with allowable antenna parameters, and transmitter operating conditions for satisfying RF exposure compliance. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| /COY2UPcpbMNoc5gu9YaOw== | 2007-06-26 | Change in identification of presently authorized equipment. Original FCC ID: SQB-NIVISNRD20101 Grant Date: 11/07/2006 |
Equipment Authorization
| Frequency | Output | Rules |
|---|---|---|
| 910.5-927.5 MHz | 0.5649000 | 15C |
Grants
TCB Grant - Application /COY2UPcpbMNoc5gu9YaOw==
This application does not exist.
EAS Grant - Application /COY2UPcpbMNoc5gu9YaOw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Landis+Gyr Technologies, LLC 6436 County Rd 11 Pequot Lakes, MN 56472 United States |
Date of Grant: 06/26/2007 Application Dated: 05/15/2007 |
| Attention: Carl Jacobi , Hardware Test Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | TEB-HUNTNRD220696 |
| Name of Grantee: | Landis+Gyr Technologies, LLC |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | RF modem module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 910.5 - 927.499962 | 0.5649 |
| Modular Approval. Approved for use in mobile / fixed host products only. Power Output listed is conducted. This grant is valid only when the device is supplied to OEM integrators and the integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. This device is approved for use only with the type of antenna, at equal or lower gain, as described in this filing and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with allowable antenna parameters, and transmitter operating conditions for satisfying RF exposure compliance. |
| Mail To: |