FCC ID TEB-HUNTSSDC0696
Amplified Radio Modem
by Landis+Gyr Technologies, LLC
Grantee Code: TEB Product Code: HUNTSSDC0696
Latest application date: 2007-06-29
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 910.5-927.5 MHz | Change in identification of presently authorized equipment. Original FCC ID: SQB-NIVISP9050103 Grant Date: 03/23/2005 | 2007-06-29 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| External Photo | External Photos | 2007-06-29 | PDF 1.2 MB |
| FCC ld Label | ID Label/Location Info | 2007-06-29 | PDF 582.2 KB |
| Cover Letter | Cover Letter(s) | 2007-06-29 | PDF 984 KB |
Application Information
| Application ID | FqFmO9dTOeWPeBMrb+enig== |
|---|---|
| Final Action Date | 2007-06-29 |
| Application Purpose | Change in identification of presently authorized equipment. Original FCC ID: SQB-NIVISP9050103 Grant Date: 03/23/2005 |
| Applicant FRN | 0013591094 |
| Model | -HUNTSSDC0696 |
| Frequency Range | 910.5-927.5 MHz |
| Equipment Class | DSS - Part 15 Spread Spectrum Transmitter |
| Device Description | Amplified Radio Modem |
| Responsible Party | Carl W Jacobi, Hardware Test Engineer, carl.jacobi@landisgyr.com  , 218-562-5125 |
| Technical Contact | Matt Donald Karlgaard, Hunt Technologies, matt.karlgaard@hunttechnologies.com  , 218-562-5198 |
| Test Firm | George Yang, US Tech, gyang@ustech-lab.com  , 7707400717 |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | No |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Modular Approval. Power Output listed is Conducted. This transmitter is authorized only for use in devices where the antenna may be installed such that no less than 20 cm will be maintained between the antenna and users, as specified in this filing. The antenna used for this device must be installed to provide a separation distance of at least 20cm from all persons, and must not be collocated or operating in conjunction with any other antenna or transmitter other than those shown in applications under this FCC ID. Integrators and users must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF Exposure compliance. Co-located transmitter configurations have been evaluated only for specific host configurations and specific antenna configurations as shown in applications under this FCC ID. Co-location with FCC ID: SQB-NIVISSGM48 and FCC ID: SQB-NIVISCM42 requires a minimum separation distance of 23 cm between antenna and users. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| FqFmO9dTOeWPeBMrb+enig== | 2007-06-29 | Change in identification of presently authorized equipment. Original FCC ID: SQB-NIVISP9050103 Grant Date: 03/23/2005 |
Grants
TCB Grant - Application FqFmO9dTOeWPeBMrb+enig==
This application does not exist.
EAS Grant - Application FqFmO9dTOeWPeBMrb+enig==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Landis+Gyr Technologies, LLC 6436 County Rd 11 Pequot Lakes, MN 56472 United States |
Date of Grant: 06/29/2007 Application Dated: 05/15/2007 |
| Attention: Carl Jacobi , Hardware Test Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | TEB-HUNTSSDC0696 |
| Name of Grantee: | Landis+Gyr Technologies, LLC |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Amplified Radio Modem |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 20 | 15C | 910.5 - 927.499962 | 0.13 |
| Modular Approval. Power Output listed is Conducted. This transmitter is authorized only for use in devices where the antenna may be installed such that no less than 20 cm will be maintained between the antenna and users, as specified in this filing. The antenna used for this device must be installed to provide a separation distance of at least 20cm from all persons, and must not be collocated or operating in conjunction with any other antenna or transmitter other than those shown in applications under this FCC ID. Integrators and users must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF Exposure compliance. Co-located transmitter configurations have been evaluated only for specific host configurations and specific antenna configurations as shown in applications under this FCC ID. Co-location with FCC ID: SQB-NIVISSGM48 and FCC ID: SQB-NIVISCM42 requires a minimum separation distance of 23 cm between antenna and users. |
| 20: | All electrical and mechanical devices employed for spurious radiation suppression, including any modifications made during certification testing, must be incorporated in each unit marketed. |
| Mail To: |