FCC ID TEB-HUNTSSGSM48
Transmitter Module for mobile Applications
by Landis+Gyr Technologies, LLC
Grantee Code: TEB Product Code: HUNTSSGSM48
Latest application date: 2007-06-28
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 824.2-848.8 MHz | Change in identification of presently authorized equipment. Original FCC ID: SQB-NIVISSGM48 Grant Date: 03/02/2005 | 2007-06-28 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Photos of board | External Photos | 2007-06-28 | PDF 1.1 MB |
| FCC ID Label | ID Label/Location Info | 2007-06-28 | PDF 505.1 KB |
| Cover Letter | Cover Letter(s) | 2007-06-28 | PDF 984.5 KB |
Application Information
| Application ID | 9Mna7H6+kRBGu+AfjZwPow== |
|---|---|
| Final Action Date | 2007-06-28 |
| Application Purpose | Change in identification of presently authorized equipment. Original FCC ID: SQB-NIVISSGM48 Grant Date: 03/02/2005 |
| Applicant FRN | 0013591094 |
| Model | -HUNTSSGSM48 |
| Frequency Range | 824.2-848.8 MHz |
| Equipment Class | PCB - PCS Licensed Transmitter |
| Device Description | Transmitter Module for mobile Applications |
| Responsible Party | Carl W Jacobi, Hardware Test Engineer, carl.jacobi@landisgyr.com  , 218-562-5125 |
| Technical Contact | Matt Donald Karlgaard, Hunt Technologies, matt.karlgaard@hunttechnologies.com  , 218-562-5198 |
| Test Firm | George Yang, US Tech, gyang@ustech-lab.com  , 7707400717 |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | No |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Power is conducted. This device is to be used ONLY for mobile and fixed applications. Antenna gain is not to exceed -1.5 dBi. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device is GSM (PCS) and GSM 850 both of which can operate within the US. Co-located transmitter operating conditions with a minimum separation distance of 23cm between antennas with FCC ID: SQB-NIVISP9050103 have been evaluated as described in this filing. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| 9Mna7H6+kRBGu+AfjZwPow== | 2007-06-28 | Change in identification of presently authorized equipment. Original FCC ID: SQB-NIVISSGM48 Grant Date: 03/02/2005 |
Equipment Authorization
Grants
TCB Grant - Application 9Mna7H6+kRBGu+AfjZwPow==
This application does not exist.
EAS Grant - Application 9Mna7H6+kRBGu+AfjZwPow==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Landis+Gyr Technologies, LLC 6436 County Rd 11 Pequot Lakes, MN 56472 United States |
Date of Grant: 06/28/2007 Application Dated: 05/15/2007 |
| Attention: Carl Jacobi , Hardware Test Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | TEB-HUNTSSGSM48 |
| Name of Grantee: | Landis+Gyr Technologies, LLC |
| Equipment Class: | PCS Licensed Transmitter |
| Notes: | Transmitter Module for mobile Applications |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 20 | 22H | 824.2 - 848.8 | 1.11 | 1.0 PM | 300KGXW |
| 20 | 24E | 1850.2 - 1908.75 | 1.4 | 1.0 PM | 300KGXW |
| Power is conducted. This device is to be used ONLY for mobile and fixed applications. Antenna gain is not to exceed -1.5 dBi. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device is GSM (PCS) and GSM 850 both of which can operate within the US. Co-located transmitter operating conditions with a minimum separation distance of 23cm between antennas with FCC ID: SQB-NIVISP9050103 have been evaluated as described in this filing.
|
| 20: | All electrical and mechanical devices employed for spurious radiation suppression, including any modifications made during certification testing, must be incorporated in each unit marketed. |
| Mail To: |