FCC ID TFJHE7620

802.11n 20HT WIFI modular

by Uniform Industrial Corp.

Grantee Code: TFJ   Product Code: HE7620
Latest application date: 2015-06-05

FCC ID Device Details

FCC IDTFJHE7620
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeTFJ
Product CodeHE7620
Applicant BusinessUniform Industrial Corp. 🇺🇸
Related Domains uicusa.com
Equipment Class802.11n 20HT WIFI modular
Test FirmCentral Research Technology Co.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2412-2462 MHzOriginal Equipment2015-06-05

Exhibits

DocumentTypeAvailableFile
Use manual Rev. 1Users Manual2015-06-05PDF 351.3 KB
RF-U010-1503-046 Attachment 3Internal Photos2015-06-05PDF 189.9 KB
RF-U010-1503-046 Attachment 2External Photos2015-06-05PDF 376.2 KB
label and location Rev. 1External Photos2015-06-05PDF 336.4 KB
label and location Rev. 1ID Label/Location Info2015-06-05PDF 336.4 KB
RF-U010-1503-046 Attachment 1Test Setup Photos2015-06-05PDF 188.8 KB
RF-U010-1503-046 RevTest Report2015-06-05PDF 538.3 KB
AuthorizationCover Letter(s)2015-06-05PDF 210.2 KB
Confidentiality letterCover Letter(s)2015-06-05PDF 459.2 KB
Freq. cover letterCover Letter(s)2015-06-05PDF 36.6 KB
Modular approval letter Rev. 1Cover Letter(s)2015-06-05PDF 1.2 MB
Block Diagram Metadata onlyBlock DiagramPDF 6.2 KB
Schematic Metadata onlySchematicsPDF 158.7 KB
Operation Description Rev. 2 Metadata onlyOperational DescriptionPDF 214.1 KB

Application Information

Application IDWhYd4vcTFSAphYYHcqh9uA==
Final Action Date2015-06-05
Application PurposeOriginal Equipment
Applicant FRN0013643648
ModelHE7620
Frequency Range2412-2462 MHz
Equipment ClassDTS - Digital Transmission System
Device Description802.11n 20HT WIFI modular
Responsible PartyRobin Tang, Director of Engineering, robin@uicusa.com , (510)4386799
Technical ContactCathy Chen, Central Research Technology Co., cathy@crc-lab.com , 886-2-2598-4568
Test FirmYin-Chih CHIEH, Central Research Technology Co., cyc@crc-lab.com , 886-2-25984505
TCB Emailhotline@acbcert.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentSingle Modular Approval
Composite DeviceNo
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsSingle Modular Approval. Power Output listed is Conducted. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. The Grantee is responsible for providing the documentation required for modular use. The responsibility for the use of this module, in all configurations utilized or contemplated, remains with the Grantee.

Applications

Application IDDatePurpose
WhYd4vcTFSAphYYHcqh9uA==2015-06-05Original Equipment

Equipment Authorization

FrequencyOutputRules
2412-2462 MHz0.078000015C

Grants

TCB Grant - Application WhYd4vcTFSAphYYHcqh9uA==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
Date of Grant: 06/05/2015

Application Dated: 06/05/2015
Uniform Industrial Corp.
2901 Bayview Dr.
P.O. Box 94538,
Fremont, CA 94538
 
Attention: Robin Tang , Director of Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  TFJHE7620
Name of Grantee:  Uniform Industrial Corp.
Equipment Class: Digital Transmission System
Notes: 802.11n 20HT WIFI modular
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2412.0  -  2462.0 0.078  

Single Modular Approval. Power Output listed is Conducted. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. The Grantee is responsible for providing the documentation required for modular use. The responsibility for the use of this module, in all configurations utilized or contemplated, remains with the Grantee.

EAS Grant - Application WhYd4vcTFSAphYYHcqh9uA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Uniform Industrial Corp.
2901 Bayview Dr. P.O. Box 94538,
Fremont, CA 94538
United States
  Date of Grant: 06/05/2015

Application Dated: 06/05/2015
 
Attention: Robin Tang , Director of Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  TFJHE7620
Name of Grantee:  Uniform Industrial Corp.
Equipment Class: Digital Transmission System
Notes: 802.11n 20HT WIFI modular
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2412.0  -  2462.0 0.078  

Single Modular Approval. Power Output listed is Conducted. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. The Grantee is responsible for providing the documentation required for modular use. The responsibility for the use of this module, in all configurations utilized or contemplated, remains with the Grantee.



Mail To: