FCC ID TFJPIXIE-W
BT/WiFi Module
by Uniform Industrial Corp.
Grantee Code: TFJ Product Code: PIXIEW
Latest application date: 2021-09-28
FCC ID Device Details
| FCC ID | TFJPIXIE-W |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | TFJ |
| Product Code | PIXIEW |
| Applicant Business | Uniform Industrial Corp. 🇺🇸 |
| Related Domains |  uicusa.com  mrt-cert.com |
| Equipment Class | BT/WiFi Module |
| Test Firm | MRT Technology (Taiwan) Co.,Ltd |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2021-09-28 |
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2021-09-28 |
| 2402-2480 MHz | Original Equipment | 2021-09-10 |
| 2412-2462 MHz | Original Equipment | 2021-09-10 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Users Manual | Users Manual | 2021-09-28 | PDF 237.9 KB |
| Users Manual | Users Manual | 2021-09-10 | PDF 204.2 KB |
| Internal Photos | Internal Photos | 2021-09-28 | PDF 2.4 MB |
| Internal Photos | Internal Photos | 2021-09-10 | PDF 299.3 KB |
| External Photos | External Photos | 2021-09-28 | PDF 2 MB |
| External Photos | External Photos | 2021-09-10 | PDF 393.4 KB |
| ID Label/Location Info | ID Label/Location Info | 2021-09-28 | PDF 146.5 KB |
| ID Label/Location Info | ID Label/Location Info | 2021-09-10 | PDF 167 KB |
| Test Setup Photos_2107TW5404 | Test Setup Photos | 2021-09-28 | PDF 1.4 MB |
| Test Setup Photos_2108RSU094-UT | Test Setup Photos | 2021-09-28 | PDF 243 KB |
| Test Setup Photos | Test Setup Photos | 2021-09-10 | PDF 929.3 KB |
| Test Report_DSS | Test Report | 2021-09-28 | PDF 1.9 MB |
| Test Report_DTS | Test Report | 2021-09-28 | PDF 2.5 MB |
| Test Report_SAR Metadata only | RF Exposure Info | 2021-09-28 | PDF 1.8 MB |
| Test Report_SAR Revised | RF Exposure Info | 2021-09-28 | PDF 1.8 MB |
| Test Report_SAR_Annex E | RF Exposure Info | 2021-09-28 | PDF 2.8 MB |
| Test Report | Test Report | 2021-09-10 | PDF 4.7 MB |
| Test Report | Test Report | 2021-09-10 | PDF 3.8 MB |
| C2PC Letter | Cover Letter(s) | 2021-09-28 | PDF 319.4 KB |
| Declaration of authorization | Cover Letter(s) | 2021-09-28 | PDF 315.1 KB |
| confidentiality | Cover Letter(s) | 2021-09-28 | PDF 330.8 KB |
| Confidentiality | Cover Letter(s) | 2021-09-10 | PDF 332.2 KB |
| Declaration of authorization | Cover Letter(s) | 2021-09-10 | PDF 315.8 KB |
| FCC Modular Approval Request | Cover Letter(s) | 2021-09-10 | PDF 570.1 KB |
| RF Exposure Info | RF Exposure Info | 2021-09-10 | PDF 87.5 KB |
| Block Diagram Metadata only | Block Diagram | PDF 130.9 KB | |
| Block Diagram Metadata only | Block Diagram | PDF 292.6 KB | |
| Schematics Metadata only | Schematics | PDF 499.9 KB | |
| Schematics Metadata only | Schematics | PDF 80.1 KB | |
| Operational Description Metadata only | Operational Description | PDF 115.2 KB | |
| Operational Description Metadata only | Operational Description | PDF 29.9 KB |
Application Information
| Application ID | hn/Mg07Oi1GIka/q9Ncwqg== |
|---|---|
| Final Action Date | 2021-09-28 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0013643648 |
| Model | PIXIE-W |
| Frequency Range | 2402-2480 MHz |
| Equipment Class | DSS - Part 15 Spread Spectrum Transmitter |
| Device Description | BT/WiFi Module |
| Responsible Party | Robin Tang, Director of Engineering, robin@uicusa.com , (510)4386799 |
| Agent | Chenz Chenz Chenz, MRT Technology (Taiwan) Co.,Ltd, chenzker@mrt-cert.com , +88633288388 |
| Technical Contact | Chenz Ker, MRT Technology (Taiwan) Co., Ltd, chenzker@mrt-cert.com , +88633288388 |
| Non-Technical Contact | Chenz Ker, MRT Technology (Taiwan) Co., Ltd, chenzker@mrt-cert.com , +88633288388 |
| Test Firm | Chenz Ker, MRT Technology (Taiwan) Co.,Ltd, chenzker@mrt-cert.com , +886-3-328-8388 |
| TCB Email | certification@telefication.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Limited Single Modular Approval |
| Composite Device | Yes |
| Composite Part | Yes |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | C2PC: Adding the host (product name: Mobile POS Terminal; brand: UIC; model: PIXIE). The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 0 mm. The highest reported SAR values for body, extremity and simultaneous transmission use conditions are 0.24 W/kg, 0.13 W/kg and 0.69 W/kg, respectively. Modular Approval. Output power listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna's as listed in this application must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| hn/Mg07Oi1GIka/q9Ncwqg== | 2021-09-28 | Class II permissive change or modification of presently authorized equipment |
| GOs3yk6DHZugteXAVyz+lA== | 2021-09-28 | Class II permissive change or modification of presently authorized equipment |
| FHCkhHUgRsa0+fVAdPSHWA== | 2021-09-10 | Original Equipment |
| C1qqlqjfyNmwfJBlzsYeNg== | 2021-09-10 | Original Equipment |
Grants
TCB Grant - Application hn/Mg07Oi1GIka/q9Ncwqg==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Telefication B.V. Wilmersdorf 50 Apeldoorn, NL-7300 AC Netherlands |
Date of Grant: 09/28/2021 Application Dated: 09/22/2021 |
| Uniform Industrial Corp. |
| 2901 Bayview Dr. |
| P.O. Box 94538, |
| Fremont, CA 94538 |
| Attention: Robin Tang , Director of Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | TFJPIXIE-W |
| Name of Grantee: | Uniform Industrial Corp. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | BT/WiFi Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.0073 |
| C2PC: Adding the host (product name: Mobile POS Terminal; brand: UIC; model: PIXIE). The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 0 mm. The highest reported SAR values for body, extremity and simultaneous transmission use conditions are 0.24 W/kg, 0.13 W/kg and 0.69 W/kg, respectively. Modular Approval. Output power listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna's as listed in this application must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. |
EAS Grant - Application hn/Mg07Oi1GIka/q9Ncwqg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Uniform Industrial Corp. 2901 Bayview Dr. P.O. Box 94538, Fremont, CA 94538 United States |
Date of Grant: 09/28/2021 Application Dated: 09/22/2021 |
| Attention: Robin Tang , Director of Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | TFJPIXIE-W |
| Name of Grantee: | Uniform Industrial Corp. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | BT/WiFi Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.0073 |
| C2PC: Adding the host (product name: Mobile POS Terminal; brand: UIC; model: PIXIE). The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 0 mm. The highest reported SAR values for body, extremity and simultaneous transmission use conditions are 0.24 W/kg, 0.13 W/kg and 0.69 W/kg, respectively. Modular Approval. Output power listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna's as listed in this application must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Telefication B.V. Wilmersdorf 50 Apeldoorn, NL-7300 AC Netherlands |
Date of Grant: 09/28/2021 Application Dated: 09/22/2021 |
| Uniform Industrial Corp. |
| 2901 Bayview Dr. |
| P.O. Box 94538, |
| Fremont, CA 94538 |
| Attention: Robin Tang , Director of Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | TFJPIXIE-W |
| Name of Grantee: | Uniform Industrial Corp. |
| Equipment Class: | Digital Transmission System |
| Notes: | BT/WiFi Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.17 |
| C2PC: Adding the host (product name: Mobile POS Terminal; brand: UIC; model: PIXIE). The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 0 mm. The highest reported SAR values for body, extremity and simultaneous transmission use conditions are 0.11 W/kg, 0.49 W/kg and 0.56 W/kg, respectively. Modular Approval. Output power listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna's as listed in this application must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. |
EAS Grant - Application GOs3yk6DHZugteXAVyz+lA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Uniform Industrial Corp. 2901 Bayview Dr. P.O. Box 94538, Fremont, CA 94538 United States |
Date of Grant: 09/28/2021 Application Dated: 09/22/2021 |
| Attention: Robin Tang , Director of Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | TFJPIXIE-W |
| Name of Grantee: | Uniform Industrial Corp. |
| Equipment Class: | Digital Transmission System |
| Notes: | BT/WiFi Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.17 |
| C2PC: Adding the host (product name: Mobile POS Terminal; brand: UIC; model: PIXIE). The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 0 mm. The highest reported SAR values for body, extremity and simultaneous transmission use conditions are 0.11 W/kg, 0.49 W/kg and 0.56 W/kg, respectively. Modular Approval. Output power listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna's as listed in this application must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Telefication B.V. Wilmersdorf 50 Apeldoorn, NL-7300 AC Netherlands |
Date of Grant: 09/10/2021 Application Dated: 09/09/2021 |
| Uniform Industrial Corp. |
| 2901 Bayview Dr. |
| P.O. Box 94538, |
| Fremont, CA 94538 |
| Attention: Robin Tang , Director of Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | TFJPIXIE-W |
| Name of Grantee: | Uniform Industrial Corp. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | BT/WiFi Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.0073 |
| Modular Approval. Output power listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna's as listed in this application must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. |
EAS Grant - Application FHCkhHUgRsa0+fVAdPSHWA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Uniform Industrial Corp. 2901 Bayview Dr. P.O. Box 94538, Fremont, CA 94538 United States |
Date of Grant: 09/10/2021 Application Dated: 09/09/2021 |
| Attention: Robin Tang , Director of Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | TFJPIXIE-W |
| Name of Grantee: | Uniform Industrial Corp. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | BT/WiFi Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.0073 |
| Modular Approval. Output power listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna's as listed in this application must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Telefication B.V. Wilmersdorf 50 Apeldoorn, NL-7300 AC Netherlands |
Date of Grant: 09/10/2021 Application Dated: 09/09/2021 |
| Uniform Industrial Corp. |
| 2901 Bayview Dr. |
| P.O. Box 94538, |
| Fremont, CA 94538 |
| Attention: Robin Tang , Director of Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | TFJPIXIE-W |
| Name of Grantee: | Uniform Industrial Corp. |
| Equipment Class: | Digital Transmission System |
| Notes: | BT/WiFi Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.17 |
| Modular Approval. Output power listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna's as listed in this application must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. |
EAS Grant - Application C1qqlqjfyNmwfJBlzsYeNg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Uniform Industrial Corp. 2901 Bayview Dr. P.O. Box 94538, Fremont, CA 94538 United States |
Date of Grant: 09/10/2021 Application Dated: 09/09/2021 |
| Attention: Robin Tang , Director of Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | TFJPIXIE-W |
| Name of Grantee: | Uniform Industrial Corp. |
| Equipment Class: | Digital Transmission System |
| Notes: | BT/WiFi Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.17 |
| Modular Approval. Output power listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna's as listed in this application must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. |
| Mail To: |