FCC ID TFT-MC8795
MC8795V PCI Express Mini Card - GSM/GPRS/EDGE 850/1900 & UMTS/HSPA 850/1900
by MAXID Corp.
Grantee Code: TFT Product Code: MC8795
Latest application date: 2011-10-07
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 824.2-848.8 MHz | Class II permissive change or modification of presently authorized equipment | 2011-10-07 |
| 824.2-848.8 MHz | Change in identification of presently authorized equipment. Original FCC ID: N7NMC8795 Grant Date: 12/22/2009 | 2011-09-12 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Internal Photos | Internal Photos | 2011-11-21 | PDF 2.1 MB |
| External Photos | External Photos | 2011-09-12 | PDF 246.7 KB |
| Label Information | ID Label/Location Info | 2011-10-07 | PDF 212.4 KB |
| Label Information | ID Label/Location Info | 2011-09-12 | PDF 107.8 KB |
| SAR Test Setup Photos | Test Setup Photos | 2011-11-21 | PDF 1.7 MB |
| Agency Agreement | Cover Letter(s) | 2011-10-07 | PDF 193.4 KB |
| Confidentiality Request | Cover Letter(s) | 2011-10-07 | PDF 42.9 KB |
| FCC Cover Letter | Cover Letter(s) | 2011-10-07 | PDF 39.8 KB |
| Change in ID Authorization Letter | Cover Letter(s) | 2011-09-12 | PDF 44.1 KB |
| Change in ID Request Letter | Cover Letter(s) | 2011-09-12 | PDF 232.3 KB |
| SAR Report | RF Exposure Info | 2011-10-07 | PDF 3.5 MB |
Application Information
| Application ID | MjTNYHsmMehy9fgQedD1TQ== |
|---|---|
| Final Action Date | 2011-10-07 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0018448183 |
| Model | -MC8795 |
| Frequency Range | 824.2-848.8 MHz |
| Equipment Class | PCB - PCS Licensed Transmitter |
| Device Description | MC8795V PCI Express Mini Card - GSM/GPRS/EDGE 850/1900 & UMTS/HSPA 850/1900 |
| Responsible Party | Steve Bowen, Mr, steve.bowen@maxid.net |
| Agent | Sam Sam Sam, Advanced Compliance Solutions, Inc., swismer@acstestlab.com |
| Test Firm | Randy Abernathy, Advanced Compliance Solutions, Inc., rabernathy@acstestlab.com |
| TCB Email | jwoods@acstestlab.com |
| TCB Scope | B1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 & 27 |
| Short-Term Confidentiality | Yes |
| Short-Term Confidentiality Date | 11/21/2011 |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | No |
| Composite Part | Yes |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | Yes |
| Grant Comments | Output power listed is conducted. Modular Approval for use as a module in mobile-only exposure conditions, antenna gain including cable loss must not exceed 5 dBi in Cellular Band and 3 dBi in PCS band, for purposes of 2.1043 and 2.1091. This device is allowed only for OEM integration into host products; consumer or end-user installation is not allowed. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. End-users must be provided with specific information required to satisfy RF exposure compliance for final host devices and installations. This device contains functions that are not operational in U.S Territories. This filing is only applicable for US operations. Class II Change to address co-location with FCC ID: TFTWT12 and FCC ID: TFT533ANM inside portable host TFT-IDL750 as described in this filing. The highest reported SAR is 0.459 W/kg; the highest summation of 1-g SAR is 0.728 W/kg |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| MjTNYHsmMehy9fgQedD1TQ== | 2011-10-07 | Class II permissive change or modification of presently authorized equipment |
| /UdQ/wJJmxo3Kz/Ogv6P0w== | 2011-09-12 | Change in identification of presently authorized equipment. Original FCC ID: N7NMC8795 Grant Date: 12/22/2009 |
Equipment Authorization
Grants
TCB Grant - Application MjTNYHsmMehy9fgQedD1TQ==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Advanced Compliance Solutions, Inc. 5015 B.U. Bowman Drive Buford, GA 30518 |
Date of Grant: 10/07/2011 Application Dated: 10/07/2011 |
| MAXID Corp. |
| 4445 Corporation Lane |
| 2nd floor |
| Virginia Beach, VA 23462 |
| Attention: Steve Bowen , Mr |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | TFT-MC8795 |
| Name of Grantee: | MAXID Corp. |
| Equipment Class: | PCS Licensed Transmitter |
| Notes: | MC8795V PCI Express Mini Card - GSM/GPRS/EDGE 850/1900 & UMTS/HSPA 850/1900 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 22H | 824.2 - 848.8 | 1.578 | 0.1 PM | 252KGXW | |
| 22H | 824.2 - 848.8 | 1.574 | 0.1 PM | 248KG7W | |
| 22H | 826.4 - 846.6 | 0.292 | 0.1 PM | 4M21F9W | |
| 24E | 1850.2 - 1909.8 | 0.906 | 0.1 PM | 252KGXW | |
| 24E | 1850.2 - 1909.8 | 0.995 | 0.1 PM | 248KG7W | |
| 24E | 1852.4 - 1907.6 | 0.223 | 0.1 PM | 4M21F9W |
| Output power listed is conducted. Modular Approval for use as a module in mobile-only exposure conditions, antenna gain including cable loss must not exceed 5 dBi in Cellular Band and 3 dBi in PCS band, for purposes of 2.1043 and 2.1091. This device is allowed only for OEM integration into host products; consumer or end-user installation is not allowed. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. End-users must be provided with specific information required to satisfy RF exposure compliance for final host devices and installations. This device contains functions that are not operational in U.S Territories. This filing is only applicable for US operations. Class II Change to address co-location with FCC ID: TFTWT12 and FCC ID: TFT533ANM inside portable host TFT-IDL750 as described in this filing. The highest reported SAR is 0.459 W/kg; the highest summation of 1-g SAR is 0.728 W/kg |
EAS Grant - Application MjTNYHsmMehy9fgQedD1TQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
MAXID Corp. 4445 Corporation Lane 2nd floor Virginia Beach, VA 23462 United States |
Date of Grant: 10/07/2011 Application Dated: 10/07/2011 |
| Attention: Steve Bowen , Mr |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | TFT-MC8795 |
| Name of Grantee: | MAXID Corp. |
| Equipment Class: | PCS Licensed Transmitter |
| Notes: | MC8795V PCI Express Mini Card - GSM/GPRS/EDGE 850/1900 & UMTS/HSPA 850/1900 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 22H | 824.2 - 848.8 | 1.578 | 0.1 PM | 252KGXW | |
| 22H | 824.2 - 848.8 | 1.574 | 0.1 PM | 248KG7W | |
| 22H | 826.4 - 846.6 | 0.292 | 0.1 PM | 4M21F9W | |
| 24E | 1850.2 - 1909.8 | 0.906 | 0.1 PM | 252KGXW | |
| 24E | 1850.2 - 1909.8 | 0.995 | 0.1 PM | 248KG7W | |
| 24E | 1852.4 - 1907.6 | 0.223 | 0.1 PM | 4M21F9W |
| Output power listed is conducted. Modular Approval for use as a module in mobile-only exposure conditions, antenna gain including cable loss must not exceed 5 dBi in Cellular Band and 3 dBi in PCS band, for purposes of 2.1043 and 2.1091. This device is allowed only for OEM integration into host products; consumer or end-user installation is not allowed. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. End-users must be provided with specific information required to satisfy RF exposure compliance for final host devices and installations. This device contains functions that are not operational in U.S Territories. This filing is only applicable for US operations. Class II Change to address co-location with FCC ID: TFTWT12 and FCC ID: TFT533ANM inside portable host TFT-IDL750 as described in this filing. The highest reported SAR is 0.459 W/kg; the highest summation of 1-g SAR is 0.728 W/kg |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Advanced Compliance Solutions, Inc. 5015 B.U. Bowman Drive Buford, GA 30518 |
Date of Grant: 09/12/2011 Application Dated: 09/12/2011 |
| MAXID Corp. |
| 4445 Corporation Lane |
| 2nd floor |
| Virginia Beach, VA 23462 |
| Attention: Steve Bowen , Mr |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | TFT-MC8795 |
| Name of Grantee: | MAXID Corp. |
| Equipment Class: | PCS Licensed Transmitter |
| Notes: | MC8795V PCI Express Mini Card - GSM/GPRS/EDGE 850/1900 & UMTS/HSPA |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 22H | 824.2 - 848.8 | 1.578 | 0.1 PM | 252KGXW | |
| 22H | 824.2 - 848.8 | 1.574 | 0.1 PM | 248KG7W | |
| 22H | 826.4 - 846.6 | 0.292 | 0.1 PM | 4M21F9W | |
| 24E | 1850.2 - 1909.8 | 0.906 | 0.1 PM | 252KGXW | |
| 24E | 1850.2 - 1909.8 | 0.995 | 0.1 PM | 248KG7W | |
| 24E | 1852.4 - 1907.6 | 0.223 | 0.1 PM | 4M21F9W |
| Output power listed is conducted. Modular Approval for use as a module in mobile-only exposure conditions, antenna gain including cable loss must not exceed 5 dBi in Cellular Band and 3 dBi in PCS band, for purposes of 2.1043 and 2.1091. This device is allowed only for OEM integration into host products; consumer or end-user installation is not allowed. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. End-users must be provided with specific information required to satisfy RF exposure compliance for final host devices and installations. This device contains functions that are not operational in U.S Territories. This filing is only applicable for US operations. |
EAS Grant - Application /UdQ/wJJmxo3Kz/Ogv6P0w==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
MAXID Corp. 4445 Corporation Lane 2nd floor Virginia Beach, VA 23462 United States |
Date of Grant: 09/12/2011 Application Dated: 09/12/2011 |
| Attention: Steve Bowen , Mr |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | TFT-MC8795 |
| Name of Grantee: | MAXID Corp. |
| Equipment Class: | PCS Licensed Transmitter |
| Notes: | MC8795V PCI Express Mini Card - GSM/GPRS/EDGE 850/1900 & UMTS/HSPA |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 22H | 824.2 - 848.8 | 1.578 | 0.1 PM | 252KGXW | |
| 22H | 824.2 - 848.8 | 1.574 | 0.1 PM | 248KG7W | |
| 22H | 826.4 - 846.6 | 0.292 | 0.1 PM | 4M21F9W | |
| 24E | 1850.2 - 1909.8 | 0.906 | 0.1 PM | 252KGXW | |
| 24E | 1850.2 - 1909.8 | 0.995 | 0.1 PM | 248KG7W | |
| 24E | 1852.4 - 1907.6 | 0.223 | 0.1 PM | 4M21F9W |
| Output power listed is conducted. Modular Approval for use as a module in mobile-only exposure conditions, antenna gain including cable loss must not exceed 5 dBi in Cellular Band and 3 dBi in PCS band, for purposes of 2.1043 and 2.1091. This device is allowed only for OEM integration into host products; consumer or end-user installation is not allowed. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. End-users must be provided with specific information required to satisfy RF exposure compliance for final host devices and installations. This device contains functions that are not operational in U.S Territories. This filing is only applicable for US operations. |
| Mail To: |